Only show results in Virginia? Ok

Monitoring & Testing Applications

  • Premium

    Wastewater treatment management for humanitarian industry

    According to the World Heath Organization (WHO), more than one billion people lack access to safe drinking water and sanitation worldwide, and for this reason, water borne illness has become the leading cause of death. In fact, water borne disease kills more than 3.4 million people each year due to lack of clean water and sanitation treatment. Mobile water treatment systems solve these water contamination issues and save lives across the world.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Parallel evaporation in environmental consultancy

    For a fast and effcient sample concentration in order to monitor de pollution of the environment

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Continuous emissions monitoring in cement kilns

    Various pollutants form in the cement manufacturing process, especially when alternative fuels and waste-derived fuels are used. Typically a cement kiln using these fuels is a required to monitor hydrogen chloride (HCl). Gasmet CEM II is EN 15267-3 approved for HCl measurement in 0 … 15 mg/Nm3 range.High process temperatures result in generation of more nitrogen oxides (NOx) than in typical municipal waste incineration.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Laboratory instruments solutions for environmental industry

    The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its inhabitants.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Flow meters for the environmental flow solutions

    Our flow measurement technology is ideal for applications ranging from landfill emissions to wastewater treatment and numerous applications in between. We have developed many flow meters and controllers to measure the emissions from landfills and other green house gas producers, in addition to being a long standing leader in the testing of emissions for large engines. Water treatment is also an important driver for the company as we continue to develop innovative solutions for waste water treatment.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Chemiluminescense based analyzer for environmental applications

    A broad range of NOx analyzers for indoor, clean room, ambient, tropospheric and stratospheric monitoring. ECO PHYSICS offers a broad range of NOx analyzers for indoor, ambient, tropospheric and stratospheric monitoring. The principle of chemiluminescence detection is an extremely selective method for measuring nitrogen oxides precisely, with high linearity over a wide concentration range and with very high reproducibility. These qualities are the basis for the acknowledged high performance of ECO PHYSICS CLD NOx analyzers in tracing nitrogen oxides even down to the low ppt level.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Flow meters solutions for developing economies

    Mass flow meters and mass flow controllers help developing countries explore their natural resources. Our thermal flow meters are widely used in flotation cells in mining. Our multivariable mass vortex flow meters are used in the oil and gas industry both at the wellhead and in the refinery. Thermal mass flow meters also have a place in the power generation industry where they are used to measure and control fuel-to-fuel air ratios.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Machine condition monitoring for racing

    Overview

    Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. 

    Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, build and test racing engines also are Spectro Scientific customers. We welcome the opportunity to continue to be of service to existing customers and to assist new customers with their oil analysis instrumentation requirements.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for trucking fleet

    Overview

    Over-the-road trucking fleets depend on their vehicles for their business and revenue. Vehicle availability is critical and unexpected breakdowns can be costly – not only due to the cost of the repair but towing charges of a large truck and the lost revenue can add up to an expensive event.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for municipal fleet

    Overview

    Municipal fleets include public works vehicles, public transportation and emergency vehicles. Keeping the vehicles in these fleets up and running is critical to the operations of any city or town. Many locations have their own maintenance garages to service the municipal fleet which can include hundreds or even thousands of vehicles.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Emission Control Systems for Mechanical Evaporation Industry

    Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of time.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Monitoring of mercury in ambient air

    Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides di rect real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of me rcury concentration in ambient air.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Mercury monitoring for isotopic abundance by the ICP-MS

    Studies of real-world ecosystems are very complex. Mercury species inter-conversion as well as mercury deposition and evasion are constantly occurring. One technique to help sort out the processes is to trace reactions using natural Hg isotopes. Either by enriching a system with a particular isotope or determination of isotopic ratios as a technique of source identification, isotopes are a powerful tool for investigation. The Tekran 2600 Total Mercury and Tekran 2700 Methyl Mercury systems are designed to couple to an ICP-MS for mercury quantification by CVAFS and isotopic abundance by the ICP-MS.

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Premium

    Landfill Alternative Daily Cover Equipment

    Save time, labor, and SPACE in the management of your landfill. Designed specifically for use in the extreme environments of landfills, the LF120 HydroSeeder®, an exclusive FINN Landfill Solution™, is an efficient solution for applying alternative daily cover (ADC), as well as the application of materials to control odor, dust and erosion. The LF120 will cover the average open face in less than 1 hour using only one tank load. A tower discharge distance up to 180 feet allows for efficient ground coverage. Maneuvering on uneven surfaces and rough terrain is made easier by high clearance, heavy-duty tandem 10,000-pound rubber torsion suspension axles, along with tubeless, high flotation tires with a wide tread design

    By FINN Corporation based in Fairfield, OHIO (USA).

  • Premium

    Laser gas detection for research

    Axetris laser gas detection OEM modules are used in a variety of research applications: Climate Change Research, Environmental Research.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Precision moisture analysis instruments for mercury detection for environmental agencies

    Robust analysis for inspection, investigation, remediation. If you are responsible for monitoring a wide range of environments for mercury contamination, it’s not enough that your instrument is accurate. It must also be responsive, reliable, and rugged. Jerome has the answer.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Machine condition monitoring for lubricant & additive manufacturers

    Overview

    Many large oil companies are Spectro Scientific customers because they employ oil analysis not only to monitor their own equipment in refineries, tankers, and pipelines, but they monitor their own blended lubricant products and also frequently provide oil analysis services to customers who buy their lubricants. Many industrial and transportation companies receive oil analysis services from their lubricant supplier.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for municipalities

    Overview

    Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis solutions are used by many municipalities to monitor treatment plant gearboxes and backup diesel generators, and avoid costly lubrication mixups.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you