Only show results in Massachusetts? Ok

Monitoring & Testing Applications

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Analytical instruments for oil and gas

    To ensure product quality and process optimization, the determination of elemental impurities is crucial for control labs in refineries and in the production of alternative fuels. Analytik Jena`s versatile solutions help you comply with international regulations and improve analysis of petroleum products, natural gas and alternative fuels.

    By Analytik Jena AG based in Jena, GERMANY.

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Industrial filtration solutions for the oil & gas industry

    Industrial filtration solutions for the oil & gas industry.

    By Hilliard Corporation based in Elmira, NEW YORK (USA).

  • Premium

    Flow meters solutions for petrochemical sector

    Assure accurate and repeatable gas, liquid and steam measurement at your facility. Our volumetric vortex flow meters, multivariable mass vortex flow meters, ultrasonic flow meters and thermal mass flow meters are used for precision measurement of reactants, off-gases, and numerous other fluid flows in the refining industry.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Mining & minerals solutions for oil sands industry

    Oil and tar sands represent a vast wealth of energy reserves for the world rivaling traditional sources in quality, availability and the ability to meet the world`s needs for many years into the future. The technologies for extraction of this resource are increasingly efficient, and WesTech has worked with several companies on the leading edge of these efforts and is a ready partner for new projects and plant upgrades.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Water disinfection for the oil and gas industry

    Oil and gas companies, whether in coastal or offshore settings, use water in various stages of production and for drinking and sanitary purposes. Process water, feed water and wastewater requires disinfection and filtration treatment prior to use, reclamination or discharge. De Nora Water Technologies has been providing water and wastewater treatment solutions to the oil and gas markets for more than 25 years.

  • Premium

    Water treatment solutions for oil and gas water treatment industry

    Genesis Water Technologies understands the consistently evolving and increasing demands to treat flowback produced water in the oil & gas industry. In addition, we understand the necessity for sustainable produced water treatment solutions to handle the evolving regulatory, fiscal and environmental challenges faced by this industry. Decreased availability of water and increased environmental regulations relating to produced water from unconventional shale gas exploration “hydraulic fracking” and...

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Emission control solutions for oil & gas industry

    In Fluid Catalytic Cracking (FCC)processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn`t represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Thermal oxidation for the oil and gas industry

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM.

  • Premium

    Oil & gas fluid flow solutions

    Assure accurate and repeatable gas, liquid and steam measurement throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field. Our volumetric vortex flow meters, multivariable mass vortex flow meters, ultrasonic flow meters and thermal mass flow meters are used for precision measurement in the oil and gas industry.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Water treatment solutions for oil and gas industry

    "Made in Germany" for the global oil and gas industry. ProMinent`s tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    UV water treatment for the oil and gas industry

    We are the world’s leading supplier of UV water treatment packages for the oil, gas and petrochemical industry. With over 35 years experience in both onshore and offshore sectors, atg UV has worked closely with the world’s leading oil and gas operators, service companies and design contractors to deliver innovative, robust and reliable water treatment solutions for a range of applications.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Electronic pressure measurement devices for oil and gas industry

    As a result of global industrialisation and increasing mobility, the demand for crude oil and natural gas continues to grow. As the amount of oil and gas produced increases, so too does the need for transportation and further processing facilities.

    By BD|Sensors GmbH based in Thierstein, GERMANY.

  • Premium

    Industrial air pollution control for the oil and gas

    Few industries attract the attention of the public as does the oil & gas industry with its related strategic products (basic materials for the chemical, pharmaceutical, varnish and cosmetics industries). The bringing of oil and gas from their original sources to the consumer, into their final forms, represents one of the most complex chains in the quest to add value to raw materials.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you