Only show results in Massachusetts? Ok

Monitoring & Testing Applications

  • Premium

    Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for plastic and rubber industry

    For this specific chiller applications which includes injection moulding , recycling, film blowing, extrusion, thermoforming and other applications HITEMA is able to grant high unit reliability and the cooling temperature control to achieve the targets of production capacity with also the aim to reduce the duration of production cycles and for energy and maintenance costs reduction.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Industrial chemical solutions for plastics and rubber products industry

    The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems;...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Industrial chemical solutions for plastics and rubber products industry

    The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems;...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Laboratory instruments solutions for polymer and plastics industry

    Synthetic polymers and plastics are a mainstay of modern life. Because of their versatility and physical properties, plastics and polymers have conquered nearly every aspect of human activity: airplanes and cars, packaging of all kinds, medical devices and products, electronics, and countless more – without high-quality and high-tech plastics most products we use today in everyday life would look very different. Polymer production is a demanding process in which high-purity raw materials undergo complex...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Precision moisture analysis instruments for rapid moisture analysis for plastics

    Reduce rejected product and wasted material. Nozzle drool. Impaired physical properties. Silver streaks and other cosmetic blemishes. If the moisture content in a resin is too high at processing time, you’re likely to end up with a costly, unusable mess. And as the materials science behind plastics continues to improve, resulting in stronger, lighter, and more durable resins, accurate moisture measurement and control will only become more critical. A moisture analyzer is an indispensable piece of equipment...

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • waterproofing material

    widely used in civil engineering like railway,highway and subway to stablize the ground and strengthen the compression resistant

    By junsheng machinery based in jiaxing, CHINA.

  • Nitrogen Generators for Plastics Molding

    The innovative technique of plastics molding by means of utilization of nitrogen ensures the highest quality of the finished product with low production costs.

    By Fruit Control Equipments Srl (FCE) based in Locate Triulzi (MI), ITALY.

  • MEASURING HYDROXYL (OH) VALUES OF POLYOLS USING FT-NIR SPECTROSCOPY

    Recently, FT-NIR spectroscopy has been accepted as a rapid and accurate technique for determination of hydroxyl value of polyols. ASTM D6342-12 defines a method for measuring hydroxyl content of several materials. Using Galaxy Scientific's QuasIR series FT-NIR spectrometers, hydroxyl determination takes typically less than 1 minute per sample and requires no solvents, no reagents, and no columns or other consumables. The analysis does not even need to be performed in a lab or by a chemist, freeing them up for...

    By Galaxy Scientific based in NEW HAMPSHIRE (USA).

  • Industrial shredders system for plastic shredding sector

    Plastic is a versatile material. Characteristics range from tough polymer structures to extra-firm high-tech materials. Efficient size reduction requires experience and know-how. We are able to customise our machine designs to be suit your requirements, for example; process configuration, footprint and throughput, thereby creating the optimum solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Chemical analysis and measurement solution for plastics and polymers industry

    The non-destructive nature of Raman measurements along with the molecular specificity of the spectra make it an optimal technique to monitor manufacturing processes in real time.

    By Tornado Spectral Systems based in Toronto, ONTARIO (CANADA).

  • Plazkat Systems for treatment of emissions generated in the production and processing of plastics and polymers

    In connection with the production and processing of polymer materials (manufacturing and cutting plastic film, workingwith thermoplastics, laser cutting plastic) it is necessary to remove pollutants from the ambient air in the working area (e.g.contaminants). In this environment it is usual to install systems for removing organic substances, mainly carboxylic acids, ketones, styrene, hydrocarbons С1-С10 etc.

    By Plasma Air Systems Corporation OU based in Harju Maakond, ESTONIA.

  • EDXRF spectrometers for plastic, polymers & rubber industry

    Plastics, polymers and rubber are combined with a variety of different additives in order to give them properties that are important for many different markets. These products are commonly analyzed as beads, which in their end form are pressed or molded into plaques.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • EDXRF spectrometers for coating thickness & thin films industry

    Quality control of coating and thin film analysis All industrial operations have processes in place to ensure efficiency and safety standards. Xenemetrix systems are perfectly suitable for complementing these processes.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Burn Off Ovens for Plastics, Fiber & Chemicals

    At Pollution Control Products, our burn off ovens are used for the safe removal of polymer buildup from expensive dies, molds, extrusion screws, breaker plates and other metal parts, eliminating the need for abrasives, toxic chemicals and their health and environmental risks. Below is a common application scenario for our ovens.

    By Pollution Control Products Co. based in Dallas, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you