Only show results in Connecticut? Ok

Monitoring & Testing Applications

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many ...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Fountain solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Fluence MABR technology - low-energy nutrient removal for wastewater treatment

    Fluence MABR (membrane aerated biofilm reactor) technology address the critical challenges of wastewater treatment plants for: nutrient reduction, high effluent quality, compliance with regulations, minimized energy consumption, at a small footprint, ...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Municipal wastewater solutions for biological treatment industry

    A well-designed wastewater plant starts with your effluent requirements and an energy-efficient biological process. WesTech has multiple biological process options to match your application and preference. From trickling filters to oxidation ditches, WesTech's biological process equipment will give you the effluent quality you need and the foundation for a successful wastewater ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    ADVANCEES - Ultrapure Water Application - Custom skid-mounted water purification equipments

    Ultrapure water (UPW) is water that has been purified to very strict specifications, containing by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,055 uS/cm at 25oC, also expressed as resistivity of 18,2 MOhm. Ultra-pure water is mainly used in the semiconductor and pharmaceutical industry often is produced through processes like membrane filtration or ion exchange to reach the ultimate conductivity of 10 uS/cm. The demineralized water is then processed ...

    By Advanced Equipment and Services based in Coral Springs, FLORIDA (USA).

  • Premium

    Water quality monitoring instrument for waste water industry

    Water quality monitoring instrument for waste water industry - Water and ...

    By Yosemite Technologies Co.,Ltd based in Suzhou, CHINA.

  • Premium

    ADVANCEES - Arsenic Removal - Custom skid-mounted water purification equipments for arsenic removal

    Arsenic is a naturally occurring element found in soils and groundwater. Arsenic concentrations vary in accordance with geographic location. When arsenic levels are found to be too high at a specific location, it may be necessary to treat water to remove it. Arsenic usually exists in two different forms, or valences, in a natural setting depending on the amount of oxygen available in groundwater. In more shallow aquifers with higher levels of oxygen, arsenic will usually exist as arsenate, As (V). In deeper, ...

    By Advanced Equipment and Services based in Coral Springs, FLORIDA (USA).

  • Premium

    Municipal wastewater solutions for primary clarification industry

    In primary clarification, a portion of the suspended solids and organic matter is removed from the wastewater. This removal is usually accomplished with physical operations such as sedimentation. The effluent from primary clarification will ordinarily contain organic matter and have notable BOD. The principle function of primary clarification is to be a precursor to secondary clarification. Following primary clarification, the treated water is suitable for many agricultural and industrial uses. However, it will ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Municipal wastewater solutions for secondary clarification industry

    WesTech leads the way in municipal sedimentation solutions for primary and secondary clarification. Customers around the world benefit from the Clarifier Optimization Package (COP), which provides clean effluent, maximizes overflow rates, and optimizes underflow ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Water and Wastewater Applications for Scraper Strainers Line

    Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Premium

    Liquid/solid separation equipments for municipal water applications

    Groundwater Treatment: WesTech offers a wide variety of equipment for groundwater treatment for potable use. Whether your treatment objective is gas removal, nitrate removal, iron and manganese removal, color removal, softening, or even filtering a source under the direct influence of surface water, WesTech has your solution. ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    UV fluorescence technology for monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international ...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for ...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Liquid/solid separation equipment for remediation pollution treatment

    Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Water treatment chemicals for the distribution

    For dedicated markets or regions, Kurita Water Solutions works closely with retail companies, in accordance with a clearly defined distribution policy. We have established strong partnerships with these companies, who have proven to be serious and competent. We trust them as completely as our own ...

    By Kurita based in Tokyo, JAPAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you