Monitoring & Testing Applications in United Kingdom

  • Premium

    A New GC-MS Method for Mycotoxin Analysis Using 13C-marked Mycotoxin Derivatives

    Andreas Breidbach [1] and Wolfgang Brodacz [2,3,4] developed a new GC-MS method using fully 13C isotopelabelled analogues of T-2 toxin and HT-2 toxin that allows for the detection of these toxins at concentrations as low as 2–5 ppb.

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    Laboratory evaporation for pharmaceutical

    BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

    By BÜCHI Labortechnik AG Office in Chadderton, Oldham, UNITED KINGDOM.

  • Premium

    Increased Pigment Removal with Analysis of Pesticides in Oranges

    An application was developed to demonstrate increased pigment removal for the analysis of pesticides, using Supel™ QuE Z-Sep/C18 QuEChERS and an Ascentis® Express C18 HPLC Column. The improved cleanup can decrease column and instrument fouling, leading to extended LC column lifetime and reduced instrument downtime.

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company Distributor in UNITED KINGDOM.

  • Premium

    Chromatography laboratory instrumentation for environmental analysis sector

    A clean and safe environment is a pre-requisite for health and quality of life. BUCHI contributes to this by providing market-leading solutions for sample preparation and analysis to a wide range of industrial companies, environmental testing labs, consultants, and government authorities.

    By BÜCHI Labortechnik AG Office in Chadderton, Oldham, UNITED KINGDOM.

  • Premium

    Determination of Additives in Beverages using Ascentis Express Columns

    Beverages, such as sodas and energy drinks, can include a number of polar ingredients, which are easily soluble in the water matrix of the drinks. These ingredients include sweeteners (sugars and sugar substitutes), caffeine, vitamin supplements, amino acids, organic acids, and plant extracts. Because the analytes are already in solution, there is no need for extensive sample preparation. Dilution followed by direct injection into an HPLC is typically suitable. In this article we present two beverage applications...

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    radiello™ Passive Sampler as a Tool for the Measurement of Atmospheric Ammonia Concentrations and Dry Deposition

    The radiello ammonia sampler impregnated with phosphoric acid represents a low-cost, reliable and simple tool for assessing the atmospheric deposition of ammonia at parts per billion (ppb) concentration levels.

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    Chromatography laboratory instrumentation for academia

    Education and research count on intuitive, flexible and expandable laboratory equipment. BUCHI possesses elaborated solutions for various steps in academic laboratories covering a wide range of applications.

    By BÜCHI Labortechnik AG Office in Chadderton, Oldham, UNITED KINGDOM.

  • Premium

    Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

    Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in...

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    Chromatography laboratory instrumentation for food & beverage industry

    Effective measures against food fraud, efficient and healthy food processing and the development of functional food and neutraceuticals are just few of many challenges in modern Food and Beverage production and analysis. BUCHI offers classical reference methods and near infrared spectroscopy for food analysis, but also visualization of production processes using spray drying and encapsulation.

    By BÜCHI Labortechnik AG Office in Chadderton, Oldham, UNITED KINGDOM.

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company Distributor in UNITED KINGDOM.

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in UNITED KINGDOM.

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company Distributor in UNITED KINGDOM.

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations...

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    Formaldehyde and Acetaldehyde Determination in Air Using Fully Automated On-Line Desorption and Analysis of DNPH Cartridges

    Airborne aldehydes and ketones are collected by passing air through a cartridge containing 2,4-dinitrophenylhydrazine (DNPH). Carbonyl compounds react with the DNPH to form hydrazones, which are immobilized on the cartridge. These compounds can be easily eluted from the cartridge with acetonitrile and analyzed by HPLC with UV detection. Traditionally, this analysis including the workup contains a series of manual steps, which can become time-consuming and could incur experimental error. Automating the extraction...

    By Merck KGaA, Darmstadt, Germany Distributor in UNITED KINGDOM.

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company Distributor in UNITED KINGDOM.

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in UNITED KINGDOM.

  • Premium

    Water monitoring technology for flood warning

    Flood warning systems built into hydrological stations are used to notify local emergency authorities in the case of a flood event.

    By OTT HydroMet Office in Sheffield, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you