Monitoring & Testing Applications in California

  • Premium

    Chromatography laboratory instrumentation for pharmaceutical

    Drug discovery and development for pharmaceutical industries require safe, efficient and compliant sample preparations and analytics. BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories.

    By BÜCHI Labortechnik AG Distributor in South Sanfrancisco, CALIFORNIA (USA).

  • Premium

    Chromatography laboratory instrumentation for chemical

    Cost effective, safe and sustainable processes play a key role in the chemical industry. To cover those needs BUCHI offers a variety of reliable solutions for R&D, quality control and production.

    By BÜCHI Labortechnik AG Distributor in South Sanfrancisco, CALIFORNIA (USA).

  • Premium

    Chromatography laboratory instrumentation for environmental analysis

    Determining pollutants in environmental and food matrices requires efficient sample preparation and analytics. BUCHI provide a wide selection of solutions for reliable, flexible and safe sample processing procedures in the laboratory work flow for environmental analysis.

    By BÜCHI Labortechnik AG Distributor in South Sanfrancisco, CALIFORNIA (USA).

  • Premium

    Laboratory evaporation for pharmaceutical

    BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

    By BÜCHI Labortechnik AG Distributor in South Sanfrancisco, CALIFORNIA (USA).

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Chromatography laboratory instrumentation for food & beverage

    Effective measures against food fraud, efficient and healthy food processing and the development of functional food and neutraceuticals are just few of many challenges in modern F&B production and analysis. BUCHI offers classical reference methods and near infrared spectroscopy (NIRS) for food analysis, but also visualization of production processes using spray drying and encapsulation.

    By BÜCHI Labortechnik AG Distributor in South Sanfrancisco, CALIFORNIA (USA).

  • Premium

    Chromatography laboratory instrumentation for academia

    Education and research count on intuitive, flexible and expandable laboratory equipment. BUCHI possesses elaborated solutions for various steps in academic laboratories covering a wide range of applications.

    By BÜCHI Labortechnik AG Distributor in South Sanfrancisco, CALIFORNIA (USA).

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Chromatography laboratory instrumentation for feed (pet food)

    To produce efficiently several feed formulations starting from continuously changing raw materials and premixes, require flexible and accurate analytical and formulation technologies. BUCHI offers dedicated solutions for the entire value chain: from R&D and QC Laboratories to the production lines.

    By BÜCHI Labortechnik AG Distributor in South Sanfrancisco, CALIFORNIA (USA).

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Choose high accuracy gas flowmeter for increased precision and profitability

    Sierra designs and manufactures a wide range of today’s most advanced analog and digital gas flowmeters and controllers, including a high-pressure gas flowmeter. For gas mixing and blending applications, accuracy and precision control and measurement are always a central requirement. Sierra’s precise flow meters and controls provide end-users with high performance in gas mixing and blending applications like creating artificial atmospheres, gas mixing in manufacturing, inerting and gas chromatography.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flow meters for the process control & manufacturing flow solutions

    Most chemical reactions are based on direct mass flow readings, and thus, Sierra`s immersible thermal mass flow meters and our volumetric vortex and multivariable mass vortex flow meters see extensive used in oil, gas and steam measurement. In addition, process liquid flows can be addressed with our non-intrusive clamp-on ultrasonic flow meters. Finally, our capillary thermal mass flow meters and controllers are perfect for semiconductor processing applications.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Ultra low pressure drop MFC flow solutions

    Precision mass flow control with industry leading pressure drop of 4.5 psid (310 mBard) up to flows of 500 slpm (nlpm); Accuracy +/- 1.0% of full scale; 316 stainless steel construction; CE Approved

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Fluoride emissions monitoring in aluminum smelters

    Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions during the electrolytic process phase to the atmosphere. The gas emissions need to be monitored. Typically the smelters have emission limit values (ELVs) for sulfur dioxide and hydrogen fluoride emissions. These emissions should be measured accurately and with good precision, to ensure the smelter does not exceed its emission limit values. In...

    By Gasmet Technologies Oy Distributor in Simi Valley, CALIFORNIA (USA).

  • Premium

    Argon mass flow meters flow solutions

    Thermal mass flowmeters and controllers are ideal for Argon application where precision is key. Sierra specializes in accurate mass flow measurement and/or control of Argon gas. Popular applications range from general industrial process control, inerting and steel purification processes to name a few.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Medical, pharmaceutical, food & beverage

    Food quality and safety are two of the most challenging issues in the current regulatory environment that are of great concern to today`s health-conscious consumers. Increasingly, Ozone (O3) gas is being used in these important applications as an organic, economical, and environmentally friendly sanitation solution compared with conventional methods. This same approach is also becoming more prominent in the Medical industry for the same reasons. Whether you are generating ozone as part of a process or keeping...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you