High-Spec Instrumentation by Analytik Jena provides you a deeper understanding of chemical composition and properties for advanced materials in both QC/QA and research. Our easy to handle, high sensitivity instrumentation not only simplifies your daily routines it is designed to improve your products specifications.
TTEC Products accurately measure process temperatures in all sorts of steel making applications. These include coke ovens, blast furnace, steel making, continuous casters, hot rolling mill, annealing lines, cold mill & coating lines. TTEC manufactures special NIST traceable TECPAK Thermocouples in 6-24 Ft lengths with MVD hardened tips for use in abrasive high temperature applications. TTEC Flanged Multipoint assemblies with Multiprobe Gland fittings provide accurate temperature profiles & easily replaceabl...
Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration range,…).
Steel, an alloy of iron and carbon (up to 2% of weight), is one of the most widely used construction materials. It is produced by Basic Oxygen Steelmaking (BOS) in a converter : oxygen is blown to form carbon monoxide (CO) and carbon dioxide (CO2) with the carbon excess of molten pig iron. Other chemical elements (such as nitrogen) that may decrease the efficiency of furnace are also removed. Finally, oxygen is replaced by an inert gas (Ar) to minimize the oxidation.
H2S/Total Sulfur analyzers for Natural Gas pipeline integrity monitoring. During the extraction and processing of raw Natural Gas, midstream companies are required to track the level of Hydrogen sulfide (H2S) and Total Sulfur (TS). Accurate analysis of H2S in Natural Gas is of high importance to reach natural gas standard and to avoid equipment corrosion, as well as the decrease of heating values.
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...
Problem: Analyze total chlorines as well as organic compounds with a quick time response.
Motive:Protects and authorizes the incinerator functioning :
VOC limits the ability to incinerate
Chlorine and fluorides limits the ability to incinerate to protect the incinerator
VOC analyzed from the FID GC
The total Halogenated compounds
Installation of a reactor to convert the chlorines and the fluorides into HCl and HF
Halogenated compounds analysis with our instrument Hx analyzer
To produce efficiently several feed formulations starting from continuously changing raw materials and premixes, require flexible and accurate analytical and formulation technologies. BUCHI offers dedicated solutions for the entire value chain: from R&D and QC laboratories to the production lines.
Context & Challenges Volatile organic compounds (VOC) can be dissolved in water. Sometimes water is polluted and to study contamination of VOC in finished drinking water, VOC must be measured. Chromatotec® Solutions Chromatotec® has developed a specific system for the measurement of VOC in water: a Purge & Trap system, the airmoPURGE. The analyzer is coupled with a degasing system allowing the extraction of dissolved gases. The complete system is based on: - 502.2 method from US EPA –...
Applying the right emission control equipment for the chemical and pharmaceutical industry requires a thorough knowledge and understanding of the process and system requirements, combined with the ability to provide custom solutions.
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.
During car manufacturing, Volatile Organic Compounds (VOCs) associated with the paints are emitted to the atmosphere. These are carcinogen, toxic and lead to tropospheric ozone formation. Therefore, VOC emissions must be reduced. With this aim, Chromatotec® airmoVOC C6-C12 (GC-FID analyzer) has been used to monitor VOC emissions from a car painting line. Indeed, it can measure concentrations ranging from very low (ppt) to high (ppm) level, so it is suitable for emission measurements. When coupled to MS...
HITEMA with its range of product solutions is able to grant an energy and water saving maintaining a precise an stable temperature control for the operations of welding machines, for precision machine tools, metal cleaning processes where the precise cutting oil and hydraulic fluid temperature permit high speed operations and low maintenance costs, it permits also to increase the productivity and the lifetime of the machining center.
The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.
Multi-pollutant abatement systems. Different Categories of Waste Incineration: From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from...
The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.
TTEC custom designs Thermocouples & RTD`s for OEM Applications. These sensors range from small diameter, fast response sensors to rugged heavy duty process assemblies.Manufactured in small or large quantities, these sensors are precisely manufactured to meet or exceed specifications. TTEC OEM product solutions include high accuracy, fast response RTD`s used in Analytical Instrumentation, High Temperature Platinum Rhodium Double Tube Assemblies for Combustion Based Equipment and oil sealed, spring loaded RTD`s...