Only show results in Connecticut? Ok

Monitoring & Testing Applications

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Wastewater Treatment

    Ecological Laboratories, MICROBE-LIFT® bio-technology products are the ideal choice to improve wastewater treatment processes. Our formulation’s superior capabilities are proven to breakdown waste, reduce toxic and corrosive gases, and significantly reduce sludge, MICROBE-LIFT® drives down costs, increases operational efficiency, and assists in the achievement of regulatory compliance. The unique consortium of microbes in MICROBE-LIFT® combine with indigenous populations to provide a bio-system ...

    By Ecological Laboratories Inc based in Cape Coral, FLORIDA (USA).

  • Premium

    Decentralized Wastewater Treatment for Worker Encampments

    With Aspiral™ Smart Packaged plants, installations can meet even the strictest effluent regulations and foster good relations with neighboring communities The oil and natural gas extraction industry is booming, and where there's a boom, there's a workforce that needs shelter. Typically, impromptu housing springs up to meet the need, but often, these so-called "man camps" overstress the sanitary infrastructure of nearby towns or go without wastewater treatment entirely, endangering human health and the environment. ...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Industrial gas detection solutions for semiconductor manufacturing processes sector

    Semiconductor manufacturing processes involve highly toxic substances and flammable gases. Our ChemLogic 96 Continuous and DOD64 FTIR Sequential gas analyzers are staples in this industry with over 1,000 machines operating every day worldwide. Our gas analyzers can be found in a few different places throughout a fabrication facility such as: In the Wafer Reactor, Wafer Dryer, Gas Cabinets, and during Chemical Vapor Deposition. Our units are designed with clean environments in mind. With a sample draw of 400 feet ...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    Industrial gas detection solutions for polyurethane foam manufacturing sector

    Polyurethane Foam requires toxic gases in it’s manufacturing process. The most common gases fall into the Diisocyanate family of gases. Toluene Diisocyanate (TDI) and Methylenediphenyl diisocyanate (MDI) have exposure limits set by the Occupational Safety and Health Administration (OSHA) to ensure employee protection in polyurethane ...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the automotive manufacturing industry

    Anguil’s Engineering expertise and flexible solutions guarantee compliance and optimized performance so your automotive plant can focus on production and avoid supply chain ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and being developed at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the metal decorating industry

    Maintain Production Schedules and Profit Margins. Metal decorators and packagers rely heavily on uptime to maintain profitability. Anguil’s engineering expertise and flexible solutions guarantee compliance and optimized performance so your plant can focus on ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the natural gas production sector

    Anguil’s Engineering expertise and flexible solutions guarantee destruction efficiency and optimized performance so your plant can focus on ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Oil Spill Eater II (OSE) for energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since ...

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Ecosystem Restoration

    Ecological Laboratories network of In-Field Water Treatment Experts have restored both man made and natural bodies of water including retention and drainage ponds, streams and rivers, estuaries and municipal water management operations worldwide for over 40 ...

    By Ecological Laboratories Inc based in Cape Coral, FLORIDA (USA).

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Technologies for Wastewater Treatment in Dairy Industry

    Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the ...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Chromatography laboratory instrumentation for food & beverage industry

    Effective measures against food fraud, efficient and healthy food processing and the development of functional food and neutraceuticals are just few of many challenges in modern Food and Beverage production and analysis. BUCHI offers classical reference methods and near infrared spectroscopy for food analysis, but also visualization of production processes using spray drying and ...

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Temperature measurement and control devices for iron & steel industry

    TTEC Products accurately measure process temperatures in all sorts of steel making applications. These include coke ovens, blast furnace, steel making, continuous casters, hot rolling mill, annealing lines, cold mill & coating lines. TTEC manufactures special NIST traceable TECPAK Thermocouples in 6-24 Ft lengths with MVD hardened tips for use in abrasive high temperature applications. TTEC Flanged Multipoint assemblies with Multiprobe Gland fittings provide accurate temperature profiles & easily ...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for automotive industry

    The production of a vehicle is complicated and includes lots of processes (cooling of machine tools, painting baths, cooling of mechanical and hydraulic components, molding machines etc..) with different kind of heat transfer, each with different range of temperatures ...

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Process cooling and industrial comfort applications solutions for plastic and rubber industry

    The kind of processes required in the plastic industries is very diverse (injection molding, blow molding, thermoforming, vacuforming etc..) and HITEMA can offer a great range of products to satisfy all customer ...

    By Hitema International based in Bovolenta Padua, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you