Only show results available in Virginia? Ok

ASTM Methods Applications

  • Premium

    Determination of 4-carboxybenzaldehyde & p-toluic acid in purified terephthalic acid according to ASTM D7881 & ASTM D7882 test methods

    Introduction

    These test methods cover the determination of 4-carboxybenzaldehyde (4-CBA, 4-formylbenzoic acid) and p-toluic acid (p-TOL, 4-methylbenzoic acid) in purified terephthalic acid (PTA) by capillary electrophoresis (CE) with normal or reverse voltage mode and UV detection.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Air sampling & monitoring systems for commercial nuclear industry

    Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Determination of fatty acid methyl ester (FAME) content in diesel fuel or domestic heating fuel by mid-IR spectroscopy

    Introduction

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Application package FLUXANA Ash

    This application package is a `ready to go` calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    EDXRF spectrometers for petroleum & petrochemical

    Oil and fuel analysis - compliance with ASTM standard methods and other regulations. Xenemetrix state-of-the-art ED-XRF analyzers offer solutions for the Petroleum & Petrochemical analysis that comply with ASTM standards and regulations. Our superior solutions cover the full production process, starting from research & development up to process and quality control.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Instruments and analyzers for measure spectral irradiance of sun simulator

    Sun simulators are available in different classes indicating the performance characteristics by the combination of three letters (A,B or C) (according to IEC 60904, JIS 8912 and ASTM E 927-05). Each letter represents respectively the spectral match with the solar spectrum (1000 W/m2, AM 1.5), uniformity of the light field and temporary stability. Class AAA are considered as most accurate and have an ideal spectral match between 0.75 and 1.25, max. 2.0% non-uniformity and 0.5% nonstability according to...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Precision moisture analysis instruments for rapid solids analysis for paints and coatings

    Safely analyze solvent- and non-solvent-based coatings. Your customers rely on your paints and coatings to keep their assets safe from their environments. You can rely on Computrac® to provide accurate, reliable readings in minutes on solids and ash content for your products. Computrac Moisture, Solids and Ash analyzers can be used in ASTM method D7323-06, and can be correlated to other test methods, including D2369, and D5095. Further, Computrac® is the ONLY rapid loss-on-drying analyzer with Nitrogen...

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • MEASURING HYDROXYL (OH) VALUES OF POLYOLS USING FT-NIR SPECTROSCOPY

    Recently, FT-NIR spectroscopy has been accepted as a rapid and accurate technique for determination of hydroxyl value of polyols. ASTM D6342-12 defines a method for measuring hydroxyl content of several materials. Using Galaxy Scientific's QuasIR series FT-NIR spectrometers, hydroxyl determination takes typically less than 1 minute per sample and requires no solvents, no reagents, and no columns or other consumables. The analysis does not even need to be performed in a lab or by a chemist, freeing them up for...

    By Galaxy Scientific based in NEW HAMPSHIRE (USA).

  • Precision moisture analysis instruments for rapid moisture analysis for plastics

    Reduce rejected product and wasted material. Nozzle drool. Impaired physical properties. Silver streaks and other cosmetic blemishes. If the moisture content in a resin is too high at processing time, you’re likely to end up with a costly, unusable mess. And as the materials science behind plastics continues to improve, resulting in stronger, lighter, and more durable resins, accurate moisture measurement and control will only become more critical. A moisture analyzer is an indispensable piece of equipment...

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you