ASTM Methods Applications available in Latin America
-
Premium
Determination of 4-carboxybenzaldehyde & p-toluic acid in purified terephthalic acid according to ASTM D7881 & ASTM D7882 test methods
Introduction These test methods cover the determination of 4-carboxybenzaldehyde (4-CBA, 4-formylbenzoic acid) and p-toluic acid (p-TOL, 4-methylbenzoic acid) in purified terephthalic acid (PTA) by capillary electrophoresis (CE) with normal or reverse voltage mode and UV ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of the mercury concentration in naphtha
Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of fatty acid methyl ester (FAME) content in diesel fuel or domestic heating fuel by mid-IR spectroscopy
Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of inorganic anions in aqueous matrices according to EPA 6500 and ASTM D6508-10 test methods
This test method is applicable for determination of the dissolved inorganics anions; fluoride, bromide, chloride, nitrite, nitrate, ortho-phosphate, and sulfate in aqueous matrices using capillary ion electrophoresis with indirect UV detection. The method can be applied to drinking water, wastewater and ground water. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Application package FLUXANA Ash
This application package is a 'ready to go' calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Corrosion-resistant materials for sulfur & capping compounds industry
Sauereisen No. 600 flake Basolit Sulfur Capping Compound has been used for many years by concrete testing laboratories for testing concrete cylinders for comprehensive ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
XRF Spectrometers solutions for sulfur in oil sector
Analysis of sulfur in oil and petroleum products, such as gasoline, diesel fuel, motor and transmission oils, is one of the most important tasks. Utilizing a reliable sulfur analyzer is crucial in this context, as it ensures that the sulfur content meets the stringent regulations set forth by authorities. Sulfur forms sulfites in car exhausts, which pollute the environment. The maximum permissible level of sulfur in fuel is reduced yearly. The Directive 2003/17/EC (or EURO VI) requires that the sulfur content of ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Bio solutions for the marine construction sector
A Perfect Blend of Compliance and Sustainability. Whether they are dredging, pile driving or building a seawall, the marine construction industry is seeing the future, and it is RSC Bio Solutions. Our RSC EnviroLogic and RSC SAFECARE series of readily biodegradable lubricants, cleaners and solvents comply with the ever-changing world of federal and local regulations—including the 2013 EPA Vessel General Permit (VGP). But we offer much more than mere compliance. As a leader, we owe you more. And we deliver. ...
By RSC Bio Solutions based in Indian Trail, NORTH CAROLINA (USA).
-
Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water
In addition to providing 15 minute chemical oxygen demand (COD) results and biochemical oxygen demand (BOD) estimates, the PeCOD® Analyzer measures natural organic matter (NOM) in fresh and treated drinking water. The PeCOD® Analyzer does what no other technology has done before. It quickly and safely measures oxygen demand and the associated oxidative changes in organic matter in fresh and treated drinking water, at low concentrations and without the use of hazardous chemicals. A new ASTM International ...
By MANTECH Inc. based in Guelph, ONTARIO (CANADA).
-
Precision moisture analysis instruments for rapid moisture analysis for medical devices
Moisture content analysis for medical devices has never been easy. The resins are sophisticated and very expensive, the customers are demanding, and a minuscule cosmetic defect can mean the difference between thousands of dollars of saleable finished goods and scrap. When working with the complex, high-volatile-content materials that make up modern medical devices, every part per million counts, and every gram of resin counts. That’s why Computrac designed the Vapor Pro ...
By AMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA).
-
EDXRF spectrometers for ultra low sulfur
Compliance with the ASTM method at low concentrations sulfur. Sulfur is a major element of importance because it forms sulfuric acid in the atmosphere when burned and has harmful impact on the human health and on the environment. In the mid-2000's, the Environmental Protection Agency (EPA) began a program to greatly reduce the amount of Sulfur in petroleum products. The current allowable sulfur limit in vehicle fuel is 15 ppm (parts per million). To reduce the pollution coming from vessels the international ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
0.5mm/0.75mm/1.0mm/1.5mm/2.0mm/3.0mm ASTM Impermeable Waterproof HDPE Geomembrane for Dam/Landfill/Lake/Biogas/Mining/Fish/Shrimp Farm Pond Liner Manufacturer Price
OBOR is a professional geosynthetic products company with registered capital more than $ 10 million, covers an area of 100,000 square meters. The main products are HDPE / LDPE Geomembrane, Plastic Grass Grids, Woven/nonwoven Geotextile, Drainage Board, ...
By Shandong OBOR New Materials Co., Ltd. based in Taian City, CHINA.
-
Fiber reinforced polymer solutions for mass transit industry
Enduro provides several products for the mass transit market including third rail cover ...
By Enduro Composites based in Houston, TEXAS (USA).
-
Microbial testing for metalworking fluids industry
Microbial Contamination Results in Less than 5 minutes! Microbial growth in metalworking fluids presents a major problem. Storage tanks, recirculation lines, filters, and other equipment can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems. These problems include compromised product quality from microbially influenced corrosion (MIC), equipment and filter plugging, and health risks from bioaerosols. The best solution to these problems is early detection ...
By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).
-
Precision moisture analysis instruments for rapid solids analysis for paints and coatings
Safely analyze solvent- and non-solvent-based coatings. Your customers rely on your paints and coatings to keep their assets safe from their environments. You can rely on Computrac® to provide accurate, reliable readings in minutes on solids and ash content for your products. Computrac Moisture, Solids and Ash analyzers can be used in ASTM method D7323-06, and can be correlated to other test methods, including D2369, and D5095. Further, Computrac® is the ONLY rapid loss-on-drying analyzer with Nitrogen ...
By AMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA).
-
Precision moisture analysis instruments for rapid moisture analysis for plastics
Reduce rejected product and wasted material. Nozzle drool. Impaired physical properties. Silver streaks and other cosmetic blemishes. If the moisture content in a resin is too high at processing time, you’re likely to end up with a costly, unusable mess. And as the materials science behind plastics continues to improve, resulting in stronger, lighter, and more durable resins, accurate moisture measurement and control will only become more critical. A moisture analyzer is an indispensable piece of equipment ...
By AMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA).
-
EDXRF spectrometers for petroleum & petrochemical
Oil and fuel analysis - compliance with ASTM standard methods and other regulations. Xenemetrix state-of-the-art ED-XRF analyzers offer solutions for the Petroleum & Petrochemical analysis that comply with ASTM standards and regulations. Our superior solutions cover the full production process, starting from research & development up to process and quality ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
Precision moisture analysis instruments for moisture testing for in-service lubricants
A Chemical-Free Alternative to Karl Fischer. Accurate control of moisture in lubricating oils is critical to keeping your most important machines in optimal condition, but historically there have been few good options for measuring moisture content. The “crackle test” is easy, but not accurate enough to keep modern machines running at their best. Karl Fischer titration is very accurate, but difficult to use, expensive to operate, and requires hazardous chemical ...
By AMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA).
-
Sulfur Analysis for Marine Fuel (Bunker Fuel) – Meet IMO 2020 Compliance
The shipping industry is continually experiencing regulatory changes driven by increasing environmental concerns, resulting in ever-tightening regulations restricting sulfur (S) emissions from ships' fuel. It has been announced by the UN's shipping agency that the new sulfur IMO 2020 (International Maritime Organizations) guidelines for the sulfur content of marine fuel (bunker fuel) at sea will drop from 3.5 wt% to 0.5 wt% in early 2020. The sulfur content of traditional bunker fuels used in the shipping industry ...
By Applied Rigaku Technologies based in Cedar Park, TEXAS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you