ASTM Methods Equipment For Monitoring And Testing Available In Uruguay
-
ShowcaseManufactured by Cornell Pump LLCbased in USA
Cornell’s clear liquid centrifugal pumps are commonly used in agricultural irrigation and are known for their superior efficiency. These pumps are designed to save energy costs, potentially saving thousands of dollars annually depending on usage. With a wide range of options available, Cornell offers clear liquid pumps that meet or exceed efficiency standards for centrifugal ...
-
PremiumManufactured by CETCObased in USA
GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed with sand in a two-part thermally conductive grouting material to improve the performance of ground source heat loop applications. GEOTHERMAL GROUT is an easy pumping grout that has been carefully developed to efficiently suspend solids (silica sand) for enhanced thermal conductivity. GEOTHERMAL GROUT can be mixed to ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Fast and cost-effective determination of sulfur and nitrogen. Reliable analysis of sulfur and nitrogen. Maximum sample throughput. Minimum maintenance requirements, maximum safety. Minimum space requirement. Time-saving features: pre-calibrated, factory-tuned, short measurement times, 24/7 ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
Catalytic carbons are the newest class of activated carbons for odor control. These carbons also exhibit an enhanced capacity for H2S, but achieve this increased capacity differently than do caustically impregnated or blended carbons. Catalytic carbons convert adsorbed H2S into sulfuric acid and sulfurous acid, which is stored more efficiently on carbon than is H2S (but not as efficiently as ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Cornell's Chopper Pump is designed to handle severe plugging. The standard casing, made of ASTM A536 grade 65-45-12 ductile iron, stands up to robust applications. Everything about the pump is built to tackle complex jobs, from the replaceable cutter bar made of T1 tool steel heat treated to a minimum of 60 Rockwell C hardness to the heat-treated cast steel impeller. The Cornell Chopper pump ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Acidproof Concrete 54 - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance, 54LW is available. 54 Gunite is potassium silicate, acid-resistant refractories for use as monolithic linings in chimneys, ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Crawler-Truck CPT Penetrometer Rig (lightweight) – Max. 170 kN. The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Based upon our highly successful 2537 platform, the 2537Xi-NG on-line natural gas analyzer provides an automated application of ASTM D6340 and ISO 6978 methods. Working with an industry partner, we provide a fully integrated sampling solution including probes, pressure let-down, integrated purge cabinets, and analysis. The Tekran Model 2537Xi-NG Natural Gas Mercury Monitor is designed for ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
New ASTM D8092 Standard Supports Direct Kinematic Viscosity Measurement. MiniVisc 3000 Series is a temperature controlled, portable kinematic viscometer. The MiniVisc 3000 series (formerly the SpectroVisc Q3000 Series) viscometers are the first truly portable, solvent-free, temperature-controlled kinematic viscometers, providing high-accuracy measurements for easy detection of viscosity ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoSpread – Chemical & Food Grade 256 is a versatile epoxy flooring system catering to standard pour and spread application ...
-
PremiumManufactured by Elvatech Ltd.based in UKRAINE
ElvaX S Lab is designed especially for analysis of petrochemicals for sulfur content in wide concentration range from 2 ppm to 5%. Many international standards describe analysis method for sulfur in fuel and oil. Sulfur forms damaging sulfates in vehicle exhaust and pollute the atmosphere by sulfur oxides. Furthermore sulfur reduces fuel stability and effects on engine performance. Maximum ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The patented 50LB Mega "T" (Patent # US 8,273,162), is a "T" style odor adsorber that comes standard with 50LBs (2 Cubic feet) of Darco H2S Carbon. The 50LB Mega "T" utilizes our unique perferated disc carbon containment system with flow-through "moisture wicking" design for longer carbon bed life. This filter looks as good as it functions. the 50LB mega "t" is available for 4", 6", 8,10 and 12" ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration. In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media. With its’ excellent purity, using the FPAE-XX series ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Pump specification: 3NLP-F5K Frame mounted food handling pump. 3" x 3" Class 125 Flanged suction and discharge. Constructed of ASTM A48, Class 30 Cast Iron. 6.5" impeller diameter. 2" diameter by 3” length solid food handling characteristics. Food grade packing. Industry leading two year warranty. Variable operating speed. Optional mounting configurations ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectroT2FM 500 Analytical Ferrography Laboratory is a complete analytical system for the separation and interpretation of wear and contaminant particles in used lubricant oils, hydraulic fluids, coolants and fuels. It consists of the T2FM Ferrogram maker, a bichromatic microscope, video camera and image capture software. The SpectroT2FM 500 is fast because there is no delay time as sample is ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you