Automatic Monitoring Applications available in Bhutan
-
Premium
Water Testing for Textile Manufacturing
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Direct determination of mercury content in ambient air
Introduction: Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitative e determination of mercury in various environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides direct real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of mercury concentration in ambient ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Monitors, gas analyzers solutions for food and beverage safety sector
Providing you with a complete environmental monitoring solution. In this new era of smarter food safety, regional and local food and beverage manufacturing GMP regulations can be an asset to your business and products. Trust your contamination control monitoring and prevention to Particle Measuring Systems. We have been successfully controlling microbial and particulate contamination in critical regulated manufacturing environments worldwide for over 45 ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Measurements Solutions for Dimensional Analysis
ZYGO can extend its capabilities to enable sub-pixel 2D metrology from the same data used to report 3D metrology results. Users have the choice of using either height or intensity data to make these lateral measurements. Parameters such as line and space widths, hole dimensions, and feature to feature relationships are possible. ZYGO’s 2D metrology solutions are not only used for lateral dimensions, but also enable production and automation environments. 2D metrology can be used to identify features for part ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Monitoring of mercury in ambient air
Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides di rect real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of me rcury concentration in ambient ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Process instrumentation and analytics solutions for environmental monitoring industry
From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these ...
By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).
-
Premium
Analytical Instruments for Animal & Human Nutrition
Batch in-vitro digestibility assay for ruminants and monogastric animals. For the purpose of feed and food evaluation, in-vitro digestion and fermentation methods are ethically superior, faster and less expensive than in-vivo techniques. ...
By BPC Instruments AB based in Lund, SWEDEN.
-
Premium
Continuous emissions monitoring for glass manufacturing industries
Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring solutions for PM2.5/PM10 particulate monitoring
OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH and ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Particulate Monitoring
The Opsis SM200 is a combined particulate monitor that can be used for both automatic measurement and filter sampling. It uses 47 mm filters for sampling and beta attenuation of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Analytical Instruments for Biohydrogen
Tools for feedstock and process optimisation of dark fermentation. Hydrogen has shown enormous potential to be an alternative fuel of the future. Despite the progress in recent years, significant efforts are still needed in order to address a number of challenges for obtaining sustainable industrial-scale hydrogen production. ...
By BPC Instruments AB based in Lund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for Compliance measurements
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Emissions testing for industrial boilers and burners
Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don't worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350's compact design is better for working on a platform or small ...
By Testo, Inc. based in West Chester, PENNSYLVANIA (USA).
-
Water Data Management Solution for Dam Safety
Manage information from many different sources when managing data collected at Dams, Levees and other impoundments. Only with the help of specialized software from KISTERS is it possible to compile the key data in such a way that a reliable decision tool is available at all ...
By Kisters AG based in Aachen, GERMANY.
-
Water monitoring instruments for oil and gas
We can offer you systems that are capable of operating in the harshest of environments. We design and manufacture a range of systems that meet some of your industries most challenging ...
By Ovarro based in Eckington, UNITED KINGDOM.
-
Evaporative Emissions Testing (Ethanol, Automotive)
The automotive industry is a major air pollution contributor and thus one of the most regulated industries in the world. Several gas monitoring techniques are widely used in the automotive industry for measuring vehicle emissions. Typical applications include live on-board exhaust monitoring (CO, CO2, N2O, NOx, formaldehyde, acetaldehyde, oxygen and moisture), analysis of raw and dilute exhaust gas from the engine and tailpipe with gas-bags (CO2, N2O, NOx, CH4, EtOH, THC, H2S, SO2, NH3, formaldehyde and ...
By Gasera Ltd based in Turku, FINLAND.
-
Remote temperature monitoring
To abide local regulations, and ensure efficient and effective composting, the temperatures of the windrows must be measured and logged constantly. With accurate temperature measurements, you can determine the optimum time to turn the windrows for quicker compost production. Time consuming and error prone manual data collection is eliminated using a SureCross FlexPower Node equipped with three thermocouples to automatically monitor the temperature at three depths within a compost windrow. Temperature sensor ...
By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).
-
Real Time Tracking Systems for Mining, Oil & Gas, Underground Construction Sites
Managers in mining industry are under pressure to optimize maintenance, workforce, reduce costs, and establish a safe working environment. Litum can help monitor usage of every equipment, location and movement of employees, and create analytics help improve workflows and ...
By Litum IoT - a Subsidiary of the Litum Group based in Alsancak, TURKEY.
-
Water level sensors for irrigation tanks and systems
On remote sites, tank level monitoring and automation are tools that can essentially make or break entire operations. Whether these tanks are for water level, fertilizer level, feed level or chemical level - every site manager is different and therefore needs to be able to customize their monitoring system to achieve maximum potential. Pulsar Measurement provides products that are suited to both liquid level and solid level monitoring. Using control relays configurable to low/high-level alarms, or for pump run ...
By Pulsar Measurement based in Birmingham, UNITED KINGDOM.
-
Pressure sensor for Machine and plant construction
STS pressure transmitters and transducers are ideal for a variety of applications in machines and plant construction. Sensors from STS are installed on the harbour doors of Rotterdam Port, which protect the city against storm tides. STS has many years of experience in process automation of hydraulic monitoring and in plant ...
By STS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you