Automatic Monitoring Applications in Australasia
-
Premium
Ambient air quality monitoring solutions for PM2.5/PM10 particulate monitoring
OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH and ...
By OPSIS AB Distributor in Knoxfield, AUSTRALIA.
-
Premium
Gas analyzers and monitoring systems for Compliance measurements
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
By Gasmet Technologies - a Nederman company Distributor in Kirrawee, AUSTRALIA.
-
Premium
Particulate Monitoring
The Opsis SM200 is a combined particulate monitor that can be used for both automatic measurement and filter sampling. It uses 47 mm filters for sampling and beta attenuation of ...
By OPSIS AB Distributor in Knoxfield, AUSTRALIA.
-
Premium
Measurements Solutions for Dimensional Analysis
ZYGO can extend its capabilities to enable sub-pixel 2D metrology from the same data used to report 3D metrology results. Users have the choice of using either height or intensity data to make these lateral measurements. Parameters such as line and space widths, hole dimensions, and feature to feature relationships are possible. ZYGO’s 2D metrology solutions are not only used for lateral dimensions, but also enable production and automation environments. 2D metrology can be used to identify features for part ...
By Zygo Corporation - AMETEK, Inc Distributor in Myrtle Bank, AUSTRALIA.
-
Premium
Continuous emissions monitoring for glass manufacturing industries
Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and ...
By OPSIS AB Distributor in Knoxfield, AUSTRALIA.
-
Premium
Monitoring of mercury in ambient air
Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides di rect real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of me rcury concentration in ambient ...
By Lumex Instruments Distributor in Nunawading, AUSTRALIA.
-
Premium
Monitors, gas analyzers solutions for food and beverage safety sector
Providing you with a complete environmental monitoring solution. In this new era of smarter food safety, regional and local food and beverage manufacturing GMP regulations can be an asset to your business and products. Trust your contamination control monitoring and prevention to Particle Measuring Systems. We have been successfully controlling microbial and particulate contamination in critical regulated manufacturing environments worldwide for over 45 ...
By Particle Measuring Systems (PMS) Distributor in West Gosford, AUSTRALIA.
-
Premium
Analytical Instruments for Biohydrogen
Tools for feedstock and process optimisation of dark fermentation. Hydrogen has shown enormous potential to be an alternative fuel of the future. Despite the progress in recent years, significant efforts are still needed in order to address a number of challenges for obtaining sustainable industrial-scale hydrogen production. ...
By BPC Instruments AB Distributor in Banyo, AUSTRALIA.
-
Premium
Direct determination of mercury content in ambient air
Introduction: Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitative e determination of mercury in various environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides direct real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of mercury concentration in ambient ...
By Lumex Instruments Distributor in Nunawading, AUSTRALIA.
-
Premium
Water Data Management Solution for Dam Safety
Manage information from many different sources when managing data collected at Dams, Levees and other impoundments. Only with the help of specialized software from KISTERS is it possible to compile the key data in such a way that a reliable decision tool is available at all ...
By KISTERS Office in Weston Creek, AUSTRALIA.
-
Premium
Analytical Instruments for Animal & Human Nutrition
Batch in-vitro digestibility assay for ruminants and monogastric animals. For the purpose of feed and food evaluation, in-vitro digestion and fermentation methods are ethically superior, faster and less expensive than in-vivo techniques. ...
By BPC Instruments AB Distributor in Banyo, AUSTRALIA.
-
Premium
Water Testing for Textile Manufacturing
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
By Myron L Company Distributor in , AUSTRALIA.
-
Water treatment solutions for swimming pool water treatment
Modern water treatment and disinfection processes enhance swimming enjoyment. The use of metering technology and water treatment solutions may vary considerably depending on the industry and application. Rely on our decades of experience and know-how to find the safest and most efficient solution for ...
By ProMinent GmbH Office in Belrose, AUSTRALIA.
-
Pressure sensor for Machine and plant construction
STS pressure transmitters and transducers are ideal for a variety of applications in machines and plant construction. Sensors from STS are installed on the harbour doors of Rotterdam Port, which protect the city against storm tides. STS has many years of experience in process automation of hydraulic monitoring and in plant ...
By STS Sensor Technik Sirnach AG Distributor in , AUSTRALIA.
-
Operational modal analysis software solution for structural health monitoring (SHM) sector
ARTeMIS Modal Pro has a series of plugin modules designed for Structural Health Monitoring purposes. All modules are designed to analyse and present the health of a monitored structure in various manners, and they all rely on the same common data manager base module. This module administrates the recorded measurement files as well as the results obtained during a periodic ...
By Structural Vibration Solutions A/S Distributor in The Gap, AUSTRALIA.
-
Thin-film Measurement Technology for Building Automation Industry
The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for ...
By Innovative Sensor Technology (IST) - an EndressHauser Company Distributor in Blackburn, AUSTRALIA.
-
Water monitoring instruments for oil and gas
We can offer you systems that are capable of operating in the harshest of environments. We design and manufacture a range of systems that meet some of your industries most challenging ...
By Ovarro Office in Mulgrave, AUSTRALIA.
-
Gas Analysers for Semiconductor Industry
The importance of cleanrooms in the electronic industry. Air purity is essential for efficient production. The laboratories where technicians produce the components installed in smartphones, computers, and all electronic devices are subject to a high environmental control level. Any particles in suspension - commonly called dust - could cause irreparable damage to chips and microprocessors, becoming waste material. To maintain a high-efficiency rate, manufacturers have equipped themselves with clear rooms where ...
By ETG Risorse e Tecnologia S.r.l. Distributor in Vic, AUSTRALIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you