Benzene (C6H6) Monitoring Equipment For Monitoring And Testing Available In Trinidad & Tobago
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Volatile Organic Compounds Detector, REF-IR-ST Sensor/Transmitter, is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / dilution points by ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Measurements: The UV Sentry is a parts per billion (ppb) to percent level chemical detection and quantification open-path UV-DOAS analyzer. It offers high-performing, time-resolved monitoring of a variety of regulated ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of Sulfur Compounds in the Ambient Air. Synspec GC 955 810 gas chromatograph is specifically designed and built for the measurement of sulfur compounds in the ambient air. The two prominent groups of sulfur compounds that can be detected with this GC are mercaptans and sulfides but additional components such as benzene can be added also. The instrument is equipped with a built-in ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/FID instrument for BTEX monitoring in air, water and soil. The airmoVOC BTX is a gas chromatograph for the analysis and monitoring of trace amounts of benzene, toluene, ethylbenzene (m/p/o) xylene by FID ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Most sensitive model: This unit offers our lowest detection limits with a standard 17 meter sample path. Depending on your application, the path length may be increased up to 22 meters for a 20% improvement in detection ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 certified by the TUV following EN 14662-3 for benzene monitoring. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (up to 40 other compounds on ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Most portable model: The smallest of Cerex’s Hound Series analyzers. The Cerex Micro Hound offers continuous parts-per-billion (ppb) level monitoring with a standard 2 meter path ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Based on years of the success with UV SENTRY, the Harsh Climate model was developed by Cerex’s engineers to meet the demand of open path analyzers that can output reliable data in the midst of extreme environmental conditions. Utilizing the same proprietary technology, the Harsh Climate model features all the benefits of the UV Sentry (Gas-specific parts per trillion detection limits, 1000+ ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
We propose multiplexers (selection of multichannel samples) adapted to your installation and controlled by our software VISTACHROM. VISTACHROM can : "Cycle" methods to analyze different ranges on each stream. Transfer data via MODBUS, specific for each ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
The Cerex UV SENTRY is an open-path gas analyzer that specializes in sensitive detection of key hazardous emissions such as Benzene and Chlorine over 1000+ meters of fence-line paths. It sets the industry standard for time-resolved, gap-less fugitive emissions and chemical emergency monitoring across fence lines, around process units, and around tank farms. As the most cost-effective solution ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/FID instrument for Volatile and Semi Volatile Hydrocarbons measurement in ambient air. The airmoVOC C6C20+ is used to monitor VOCs up to the semi volatile hydrocarbons in industrial site, tropical forest and on site under decontamination. With detection limit as low as 1 ppt for Benzene or Naphthalene the system can measure gaseous PAHs in ambient air in continue up to Fluorene and linear ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
The HazLoc UV Sentry model is suited for explosive atmospheres, meeting the standards for North American C1 Div 2 A-D HAZLOC compliance. HazLoc compliance is significantly important in environments where electrical equipment has the potential to be an ignition source for combustible or flammable compounds (such as gases, vapors, dust, fibers, and more). Click here to view all our HazLoc rated ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s robust Benzene submersible probe provides affordable real-time measurement of benzene changes in water or wastewater. The probe utilizes patent-pending technology to provide superior measurement performance across multiple wavelengths of light using UV LEDs. The probes rugged body is built to withstand harsh environments, with titanium or stainless steel options. Designed to ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas chromatography (GC) coupled with a PID detector. VOC monitor QAL1 certified to EN 14662-3 standard for benzene measurement. Compact and fully automated analyser providing equal performance to the laboratory chromatographs; particularly well-suited for fixed or mobile ambient air quality monitoring stations. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
BA-15 is a multifunctional benzene analyzer based on the differential absorption spectrometry using the direct Zeeman effect. Due to the low power consumption and light weight the spectrometer is especially useful in the natural gas production and processing industries, in which benzene is often main ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s bypass Benzene sensor provides affordable real-time measurement of benzene in water or wastewater. The Benzene sensor provides superior measurement performance across multiple wavelengths of light using UV LEDs. Designed to meet the needs of many monitoring applications, the BZL series offers multiple flow cell designs and sensor path length selections to meet the desired ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you