Bioaerosol Monitoring Equipment For Monitoring And Testing Available In Fiji
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
ENVI BioScout provides a robust and sensitive bioaerosol detection solution that continuously monitors and warns for the presence of harmful airborne biological particles like bacterial, viral, rickettsial agents and toxins and collects air samples for further BWA analysis at the time of a biological alarm. ENVI Bioscout bioaerosol detector is designed to operate as an integral part of fixed or ...
-
Manufactured by Cantium Scientific Limitedbased in UNITED KINGDOM
The MicroBio MB2-RSH isolator microbial air sampler has a host of features making it ideal for use in sealed compartments, research, clean rooms, pharmaceutical validation and throughout hospitals. Capable of using both 90 mm Petri Dish (400 and 220 hole head versions) or 55 mm contact plates (only 220 hole head version), readily available at low cost with a variety of media makes the MicroBio a ...
-
Manufactured by Cantium Scientific Limitedbased in UNITED KINGDOM
This Validation Kit will ensure your MicroBio Air Sampler is performing perfectly and satisfies industry regulators and standards. Regular validation is required for regulatory compliance during normal use in addition to sending the device away for routine calibration. This is not a substitute for annual calibration of the MicroBio Air Samplers. This service can be undertaken through your local ...
-
Manufactured by SKCbased in USA
The SKC BioStage® viable cascade impactor meets NIOSH requirements and ACGIH recommendations for sampling indoor and outdoor mold and fungi. The BioStage comprises an inlet cone, precision-drilled 400-hole impactor stage, and a base that holds a standard-size agar plate. A high flow pump, such as the QuickTake 30, pulls microorganisms in air through the holes (jets) where they are collected ...
-
Manufactured by SKCbased in USA
The BioSampler® collects bioaerosols in liquid for sample times up to eight hours when used in connection with the sonic-flow Vac-U-Go Sampler. Use BioSampler for IAQ investigations, infection control in hospitals and veterinary clinics, biological research, infectious disease investigations in public buildings, and safety concerns in the food handling ...
-
Manufactured by SKCbased in USA
The Button Sampler, with its porous curved-surface inlet, is designed to improve the collection characteristics of inhalable dust, including bioaerosols for viable or non-viable analysis. Use the Button Sampler for low-level personal or area sampling of inhalable ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Micro-Vac cassettes are designed for the collection of fibers and particulate from carpets and other dusty areas. They are specially designed with an inlet port angled at 45 degrees and come preloaded with .45µ ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Air-O-Cell is a simple to use tool for the rapid collection of a wide range of airborne ...
-
Manufactured by FLIR Systems Inc.based in USA
The IBAC is a continuously-operating monitor that provides early warning of biological aerosol threats. The IBAC facilitates the process of identifying bio-terror agents to allow timely containment, treatment and remediation. Monitors are designed to detect concentrated levels of biological aerosols. Possible agents released in a bio-threat attack can include bacterial spores (such as B. ...
-
Manufactured by InnovaPrep LLCbased in USA
InnovaPrep engineers have developed a new, even more affordable compact commercial version of the Bobcat Air Sampler trusted by researchers and US military since 2012. Using the same 360° aerosol inlet design and rapid filter elution kit, the AirPrep Cub Sampler is just as efficient as the Bobcat Air Sampler for the collection and recovery of bioaerosols and particulate matter from 0.01 ...
-
Manufactured by Evapco Inc.based in USA
Small to medium size unit coolers for freezers, coolers and docks requiring low, medium and high temperature applications. SSTMB Series evaporators offer improved accessibility features, clean cabinet/pan design and corrosion inhibiting materials of construction. SSTMB evaporators are offered with Stainless Steel tube/Aluminum fin with a hygienic cabinet design. ...
-
Manufactured by TCR-Tecorabased in ITALY
The design concept of the Multistage Viable Impactor evolves from the following information: The human respiratory system tract is an aerodynamic classifying system for airborne particles. A sampling device can be used as a substitute for the respiratory tract as a collector of viable airborne particles, and as such, it should reproduce to a reasonable degree the lung penetration by these ...
-
Manufactured by Vitrocell Systems GmbHbased in GERMANY
The VITROCELL BioAerosol generator has been specifically developed and engineered for applications where the test substance must be dosed in smallest quantities. It works at low flows of e.g. 2-6 l/min. and has a low dead ...
-
Manufactured by Lennox International Inc.based in USA
Sensing and communicating, and cleans the air in your home better than any other single system you can buy. Plus the PureAir™ S Air Purification System is equipped with smart and sensing features that make maintaining your system a breeze. Built-in sensors monitor the life of both the filter and the Purifier UVA light so you don’t have to. When it’s time to change the filter or ...
-
Manufactured by Biaera Technologiesbased in USA
Biaera’s high-capacity whole body inhalation system includes an increased chamber volume to allow exposure of more or larger test subjects. With a 58 Liter volume flowing at 29 LPM, this chamber offers similar aerosol characteristics to Biaera’s standard whole body chamber. The larger volume provides the flexibility to include more test subjects in each exposure or to work with larger ...
-
Manufactured by Zeteo Techbased in USA
Zeteo Tech is developing a series of time-of-flight mass spectrometers for measurement of high molecular weight, non-volatile bio-active chemicals and biomarkers of airborne disease. We are focused on sampling bioaerosol from the ambient air or exhaled breath. When sampling exhaled breath, we focus on analyzing the bioaerosol from deep in the lung. ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The WIBS-5/NEO is the world’s only instrument for real-time, single particle measurement of atmospheric bacteria, molds, pollen, and other bioaerosols. WIBS-5 measures fluorescence to infer the presence of biological material in particles and provides detailed data on size, relative measure of shape, and fluorescent properties to enable classification of pollen, bacteria, and ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Bio-Tape™ provides a standardized sampling method for the determination of mold, microbial, bioaerosol, and inorganic dust contamination. It provides the ability to quickly take a sample and measure the relative degree of contamination. It is especially useful when sampling valuable or non-transportable materials and is very effective on smooth areas of ...
-
Manufactured by Cantium Scientific Limitedbased in UNITED KINGDOM
Bioaerosol samplers are vital equipment for us in bioaerosol research, clean rooms, pharmaceutical validation and throughout hospitals wherever air hygiene is vital. The MicroBio MB2 Bioaerosol Sampler has a host of features making it ideal for use in such applications. It has been fully validated and thousands of units are in use worldwide. ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
PUMP, ROTARY VANE/A6 SAMPLER KIT, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you