Biogas Monitoring Applications

13 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Biogas Monitoring ×

Agitators for Biogas Blants

by SUMA Rührtechnik GmbH     based in Sulzberg, GERMANY

Use the SUMA agitators to prevent the formation of floating and sinking substrate layers. Furthermore they ensure that the substrate maintains an equal temperature throughout. The homogeneously distribution of nutrients for the biological process enables more efficient gas flow out of the substrate.

Beverage Analysis

by Hiden Analytical     based in Warrington, UNITED KINGDOM

Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas/vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, & thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour & CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring

Measurement solution for AD-211 VOC speciation in natural gas, syngas & gasification

by Protea Limited     based in Middlewich, UNITED KINGDOM

Composition of Natural Gas, Syngas via VOC Speciation

The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on issues.

Biogas Monitoring for the Renewable Energy Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield.

Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate

Gas parameters: CH4 - CO2 - O2 - H2S

Gas Analysis Systems for Catalysis, Thermal Analysis, Fermentation and Bio Fuels

by Hiden Analytical     based in Warrington, UNITED KINGDOM

Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas and vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, and include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, and thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR, studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour and CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring.

Biogas monitoring

by Banner Engineering Corp.     based in Diegem, BELGIUM

meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of methane.

Research and commercial applications for the biogas industry

by Bioprocess Control AB     based in Lund, SWEDEN

Covering areas of substrate analysis, process simulation, gas flow measurement, as well as a series of bioreactors.

Sensor for Biogas

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane (CH4), and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas. CH4 is the gas component fuel, which is the intended end product of the anaerobic digestion process. In biogas plants, the concentration of CH4 in a working plant varies between 50%-75%, which is well above the Upper Explosive Limit (UEL).

Measurement solution for siloxane measurement in land-fill gas via FTIR

by Protea Limited     based in Middlewich, UNITED KINGDOM

What are siloxanes?

The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas generated is a form of renewable energy. Organosilicon compounds are often present in products such as shampoo and cosmetics, as well as industrial products and lubricants, and they move into land-fill. These volatile compounds find their way into land-fill or digester gases as siloxanes.

FT-NIR spectroscopy for the biofuels industry

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

FT-NIR spectroscopy is a widely used technique that can do rapid and non-destructive measurements in seconds. This technique can achieve multiple analysis results per measurement and determine real–time chemical information at-line and in-line.

Gas monitoring and dust monitoring for the steel industry

by NEO Monitors AS     based in Skedsmokorset, NORWAY

  • Blast furnace offgas, combustion control, CO, CO2, O2
  • Converter (Basic oxygen furnace BOF)
    • CO gas recovery
    • O2 measurement for explosion prevention
  • Electric arc furnace offgas, combustion control, CO, O2, H2O
  • Reheating furnaces, O2
  • Coking plant
    • CO analysis in oven offgas
    • O2 analysis for explosion prevention in raw coke gas or after tar precipitator
    • NH3 measurement after scrubber
    • H2S measurement after scrubber

Need help finding the right suppliers?

Let the XPRTs do the work for you