Only show results available in Michigan? Ok

Biomedical Research equipment for Monitoring and Testing

  • Premium

    HI-Q - Model PM10 Series - Size Selective High Volume Air Sampling Systems

    The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Outdoor High Volume Air Samplers Product line

  • Premium

    GE Whatman - Sterile Cellulose Nitrate Membrane Filters

    Recommended for microbiological culturing and sample preparation, GE’s Whatman cellulose nitrate membrane filters offer very narrow pore size distribution and low levels of extractables. Sterile membrane filters eliminate the risk of contamination that could impact analysis High strength and flexibility.

  • CWT - Model RO-HDU-2 - Dual Pass Upright Reverse Osmosis

    Designed for Dialysis; Licensed as a Medical Device Component by Health Canada under ISO 13485:2003. Meets or exceeds ISO 13959:2014 Water for haemodialysis and related therapies. Two pass reverse osmosis with failsafe single pass mode ensures the highest quality of water and uninterrupted operation. Quiet pump design for installation in close ...

    By Canadian Water Technologies based in Calgary, ALBERTA (CANADA).

  • EZ1 - Advanced XL Performs

    The EZ1 Advanced enables throughput of up to 6 samples per run. The EZ1 Advanced XL provides all the advantages of the EZ1 Advanced, and increases the throughput to 14 samples per run. The EZ1 Advanced and the EZ1 Advanced XL enables nucleic acid purification from a wide range of sample types relevant for molecular diagnostics, human identity ...

    By QIAGEN based in Hilden, GERMANY. from Nucleic Acid Purification Product line

  • Low Noise Laser

    The noise issues of lasers are due to the competition of mode in laser resonant cavity, which lead to high frequency jitter of output power. Through special design for laser resonant cavity and other components, the laser amplitude noise can be reduce efficiently. CNI low noise laser can be widely applied to DNA sequency, cell sorting, spectrum ...

  • PixelSensor - Multispectral Sensors

    PixelSensor multispectral sensors use exclusive on-chip filtering to pack up to 8 wavelength selective photodiodes into a compact 9x9mm array format for simpler and smaller optical devices. One PixelSensor™ replaces multiple components, helping OEMs shrink multi-wavelength instruments for applications including in vitro diagnostics, ...

    By Pixelteq based in Largo, FLORIDA (USA). from Cameras and Sensors Product line

  • Chitooligosaccharides

    Chitooligosaccharides (COSs) are hydrolyzed products of chitosan produced using enzymatic conversions, chemical methods or combinations of both. Unlike Chitosan they are readily soluble in water due to their shorter chain lengths and free amino groups in D-glucosamine units. The low viscosity and greater solubility of COSs at neutral pH have ...

    By Chitosanlab based in Brech, FRANCE.

  • Custom Optical Filters

    ECI manufactures all types of high performance optical filters over the range from 240-2600nm.  Thin film designs are deposited with Ion Beam Sputtering (IBS), Leybold APS or Ion-Assisted E-beam (IAD) deposition systems to ensure that the coatings meet your required optical performance, laser damage threshold and environmental stability.

    By Evaporated Coatings, Inc. (ECI) based in Willow Grove, PENNSYLVANIA (USA). from Optical Coatings Product line

  • Arkema - Electroactive Fluorinated Polymers

    Acquired by the Group in 2010, Piezotech is part of Arkema’s incubator. This company develops a range of ultra high added-value electroactive fluorinated polymers derived from PVDF (a thermoplastic fluoropolymer). These polymers are materials of the future, offering an inexhaustible source of innovation. Their properties hint at a wide scope ...

    By Arkema Group based in Colombes Cedex, FRANCE. from Electroactive Fluorinated Polymers Product line

  • Model Flex - Compact Low Noise Class IIIb Laser

    The Flex high performance continuous wave (CW) laser system provides a fully integrated end-user laser system based on our proven BWN, BWR, and BWB OEM laser engines in one compact class IIIb certified laser system.

    By B&W Tek based in Newark, DELAWARE (USA). from Raman Spectroscopy Systems - Benchtop Laser Systems Product line

  • Leica - Model CM3050 S - Research Cryostat System

    Primarily designed for the demanding needs of cryosectioning in biomedical, neuro-anatomical and pharmaceutical research. The Leica CM3050 S cryostat features superior user comfort with excellent safety standards for practically all types of cryosectioning applications. It is the instrument of choice for all research applications and for advanced ...

    By Leica Biosystems Nussloch GmbH based in Nußloch, GERMANY. from Cryostats Product line

  • BioSpec - Multi Purpose High Field MRI/MRS Research Systems

    Designed for the emerging market of preclinical and molecular MR imaging: The BioSpec series is designed for the emerging market of preclinical and molecular MR imaging. State-of-the-art MRI CryoProbe technology together with ultra high field USR magnets deliver high spatial resolution in vivo enabling customers to come closer to the molecular and ...

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA). from Preclinical Imaging Product line

  • Laser-Induced Fluorescence in Liquids Phase

    Planar Laser-Induced Fluorescence (PLIF) is an optical diagnostic technique widely used in fluid applications. PLIF has proven to be a valuable tool for flow visualization as well as for quantitative whole-field measurements of concentration and temperature in liquid flows. Applications can be found in process engineering, biomedical engineering, ...

    By Dantec Dynamics based in Skovlunde, DENMARK. from Fluid Mechanics Product line

  • DST - Model Centi-T - Implantable Temperature Data Logger

    The DST centi-T is a miniature submersible temperature data logger.  Recorded data is stored in its internal memory with a real-time clock reference for each measurement. The self-contained temperature logger is supported by the SeaStar software and the Communication Box which serves as an interface between the logger and a PC. Communication ...

    By Star-Oddi Ltd. based in Gardabaer, ICELAND. from Temperature Product line

  • CWT - Model SDS-H - Heat Sanitization Unit

    Designed for Dialy; Licensed as a Medical Device Component by Health Canada under ISO 13485:2003. Meets or exceeds ISO 13959:2014. Water for haemodialysis and related therapiess. Automatic integrated heat sanitization, with optional Ultrafiltration, controls bacteria and endotoxin to consistently maintain the highest quality water. Event reporting ...

    By Canadian Water Technologies based in Calgary, ALBERTA (CANADA).

  • NnF MBRANE - Model PA6 - Polymer Nanofibrous Membranes

    NnF MBRANE – PA6 (Nylon 6) is a novel kind of nanofibrous membrane produced by industrial production technology operated by Pardam, s.r.o. in the Czech Republic. Nanofibrous layer is deposited on the top of a supporting substrate with air permeating structure made of virtually any material on customers’ request – ...

    By Pardam, s.r.o. based in Pardubice, CZECH REPUBLIC. from Polymer Nanofibrous Membranes - NnF MBRANE Product line

  • PureVISTA - Chlorine Dioxide Generation System

    PureVISTA is a portable, water-activated, disinfection system that has the power to clean surfaces and facility air with unmatched effectiveness. PureVISTA creates pure chlorine dioxide gas on-site making it perfect for routine or emergency cleaning. PureVISTA is inexpensive, safe, and can be scaled to the specifications of any facility to deliver ...

    By PureLine based in Bensenville, CALIFORNIA (USA). from Surface & Air ClO2 Generation Product line

  • Model 3YSZ - 3 mol % Yttria-stabilised Zirconia

    Our 3YSZ powder offers high strength, enhanced fracture resistance and excellent tribological performance for your physically demanding applications. Its inherent nanostructure, formed as a result of Innovnano’s proprietary synthesis technology – Emulsion Detonation Synthesis (EDS), ensures 3YSZ benefits from improved chemical and ...

    By Innovnano based in Antanhol, PORTUGAL.

  • Model AC1400 - Cabinet Washer

    Steelco's AC 1400 cabinet style washer is an efficient system which is able to clean and disinfect all types of animal cages and bottles within a small/medium sized biomedical facility. It assures excellent results by rinsing at 85°C/185°F through an independent circuit, providing fast & effective cleaning and rinsing to caging and ...

    By Sychem Ltd based in Chandlers Ford, UNITED KINGDOM. from Biomedical - Cage Washers Product line

  • Xenemetrix - Model X-Cite PD/SDD - Benchtop EDXRF Spectrometer

    Key Applications: Petrochemical, Polymers, Academic / Education, Construction, Metallurgical, Alloys, Environmental, Mining & Geological, Forensics, Authentication & Precious Metals, Pharmaceutical & Biomedical.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL. from Benchtop ED-XRF Spectrometers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you