Building Moisture Monitoring Equipment For Monitoring And Testing Available In Ontario
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A very handy, hand-pulled and easy-to-operate mixer / injector on robust pneumatic wheels. Driven either by a fourstroke petrol engine with manual recoil starting system or a powerful hydraulic motor. Suitable for mixing and injecting cement grout or a cement/bentonite mixture for the filling of boreholes or CPT holes. The mixing of the cement with water takes place in the vortex of the ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen F-370 is a catalyzed hydrophobic polyurethane liquid. F-370 expands when it meets any source of water or moisture before curing. F-370 adheres tenaciously to practically any substrate – wet or ...
-
Manufactured by Synthetex, LLC.based in USA
Synthetex installs fabric formed concrete supports, mattresses, covers, sleeves and shells to prevent pipeline damage and scour, and support pipeline freespans. Jack-up supports can be used to raise a pipeline or structure. The flexible, high-strength synthetic woven fabric bags are cost effective to make and are easy to deploy by an ROV or ...
-
Manufactured by Flatwater Fleet, Incbased in USA
The FRAC-PACKER is a multi-purpose down-hole tool designed for use in hydro-fracturing, pressure grouting, acid injection, zone test-pumping, and environmental applications. When activated by a 10,000 psi pump on the surface, a unique hydraulic cylinder compresses 4 rubber seals that lock on borehole walls or casing. Average 'setting' time is 1 1/2 minutes! When the pressure is released, the ...
-
Manufactured by QSP Packers, LLCbased in USA
Mechanical Packers sometimes called Surface Set Packers, are a low cost, low pressure, hand set Packer for Cased Wells, or Smooth Hard Rock Bored Holes. They are made to be set at 12” depth to 20’ depth. The length is decided by where seal is going to be down hole. They have a limited expansion range, that is why they are not recommended to be used in Open ...
-
Manufactured by Williams Form Engineering Corporationbased in USA
The Williams Geo-Drill Injection Anchor System is today’s solution for a fast and efficient anchoring system into virtually any type of soil. The system has historically been known as a “self-drilling anchoring” because the hollow fully-threaded bar serves as both the drill string and the grouted anchor, thus installation is performed in a single operation. The sacrificial drill ...
-
Manufactured by Pittsburgh Pipebased in USA
When your pipe needs grout ports, Pittsburgh Pipe is here to help. Our fabrication services give us the flexibility to provide any additions. When you need affordable fabrication, look to Pittsburgh ...
-
Manufactured by Roctest - part of Nova Metrix LLCbased in CANADA
The multi-level vibrating wire piezometer is perfect for measuring pore pressures at various depths beneath a single surface location. It allows for quick and reliable installations because multiple PW-series piezometers are connected to a single communication cable. The multi-level piezometer provides significant advantages in terms of time, resources and cost reduction related to installation, ...
-
Manufactured by BAUER MAT Slurry Handling Systems - BAUER Groupbased in GERMANY
This system is offered as option for MAT grout plants type IEC-40 and is also available as add-on kit for already delivered IEC-40 plant. The newly developed data logging system is used for automated documentation of the continuous filling and pressure grouting process of geothermal drilling for geothermal probes in correspondence with the guidelines for quality assurance of geothermal probes ...
-
Manufactured by Green Mountain International LLC.based in USA
3/8' Tap-In Packer: Plastic packer with tapered neck. 2' in length. Threaded for zerk fitting. The economical choice for injection grouting. One bag contains 100 ...
-
Manufactured by Spetec Europebased in BELGIUM
Ecological washing agent for polyurethane injection equipment . SPETEC PUMP CLEANER is a non-flammable solvent mixture for cleaning polyurethane grout pumps and equipment. SPETEC PUMP CLEANER is composed of a mixture of organic solvents with high dissolving properties for liquid polyurethane ...
-
Manufactured by SysBohr GmbHbased in GERMANY
Simplex Jet Grouting Systems (HDI) D 88.9 - D 114.3 with rotary head and hydraulic chuck. This drilling system is especially used for grout injection to improve the ground conditions by i.e. consolidation, vertical shoring or lining slicing the soil structure by means of a jet of grout at pressures of 100 to 600 ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
The Tideflex Series 37-G Thimble Insert is comprised of a Series 37-G Duckbill Check Valve mounted in a thimble. The 37-G is pre-assembled, clamped and pinned into the thimble prior to shipment. The Thimble Insert can be provided flangeless or with a circular or rectangular flange and the 37-G can either face the flange or away from the flange depending on the installation orientation and flow ...
-
Manufactured by EMS Industries Ltdbased in UNITED KINGDOM
This is our VRH (Vertical Ram Hydraulic) Pump range which enables a larger pressure than the VRM’s. They can reach up to 25 bar, the VRH’s can also carry a greater volume and flow of 1800 litres per minute. All of our VRH’s can create a suction vacuum of 0.85 bar the equivalent to 8.5 meters static ...
-
Manufactured by SON-MAKbased in TURKEY
EP-150 is a double-acting piston pump and is hydraulic drive.Piston pumps are sensitive regarding flow and pressure control. EP-150 Grout Pump have different work pressure and flow according to injection types. The Pump have features to carry out grouting (1 – 5 mm) mixed ...
-
Manufactured by BAUER MAT Slurry Handling Systems - BAUER Groupbased in GERMANY
The fully hydraulic duplex plunger pump for delivery, filling and pressure grouting of solids-bearing, abrasive liquids for the following construction ...
-
based in USA
Cement grouting, also known as slurry grouting or high mobility grouting, is a grouting technique that fills pores in granular soil or voids in rock or soil, with flowable particulate grouts. Depending on the application, Portland cement or microfine cement grout is injected under pressure at strategic locations either through single port or multiple port pipes. The grout particle size and ...
-
Manufactured by Delmhorst Instrument Cobased in USA
The best-selling BD-2100 is great for measuring moisture in a variety of different building materials, including wood, concrete, drywall, EIFS, roofing, insulation, and flooring. A professional moisture meter, perfectly suited for checking moisture content with every step in the construction process. This versatile digital moisture meter for wood and building materials is easy to use. The applied ...
-
Manufactured by Protimeter | Amphenol Advanced Sensorsbased in USA
The Protimeter MMS2 is the industry’s most advanced all-in-one moisture meter. Its ergonomic, 4-in-1 design allows one-handed operation to measure moisture on and below the surface as well as ambient air humidity. An infrared thermometer which calculates the difference between dew point and surface temperature, is just one of the many advances designed to assess moisture in new/refurbishing ...
-
Manufactured by Devico ASbased in NORWAY
The DeviGyro RG30 Slimline is a multipurpose survey solution for slim drill hole applications. Surveying a large cluster of drill holes to learn their accurate path is an important, but often time-consuming process. However, this changes with the DeviGyro RG30 Slimline. With its lightweight, slim and robust design it is the ideal solution for challenging survey applications like blast & ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you