Calibration Gas Equipment For Monitoring And Testing Available In Central African Republic
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The photolytic converter PLC 860 is capable of selectively converting NO2 concentrations of a few ppt. The PLC 860 is the right choice for NO2 measurements in areas with excellent air ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mix your gases now. The intuitive touch display guides you through the settings. Place up to 10 different recipes and call them with a "touch". You do not need any previous knowledge or external PC software. Incorrect operation? Impossible! Another plus: as a mobile variant, the EasyCal is no bigger than a make-up ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Atomic absorption spectrometry at 254 nm with Zeeman correction for background absorption for interference-free ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The dynamic calibrator is based on the microprocessor technology and the multi-channel gas calibration equipment developed specifically for precise gas analyzer. Adopting the high precision quality flow controller and standard gas, the calibration standard gas is provided for the zero and span test of multiple gas parameters, which can provide four air sources simultaneously. The dynamic ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Series 3300Xi Mercury CEM is in place at over 130 sources in the U.S. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. Tekran® is the most experienced mercury monitoring resource in the world and continues to lead in mercury compliance monitoring, abatement system control and mobile testing ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, hydrocarbons and more. Custom options can be selected for calibration of ammonia, HCl and a variety of other gases of interest. The S6100 is a great option for dilutions from ppm or lower level cylinders. The S6100 can now be ordered or retrofit to run on a 24V power source so you can ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
microVOC is a compact VOC analyzer which allows continuous and realtime qualification and quantification of benzene, toluene, ethylbenzene, xylene and other VOC on demand. User friendly. Compact size and low weight. Deployment in less than 5 minutes. Powered by mains or battery. Low consumption of carrier gas. Rapid calibration with gaseous BTEX mixture or only Toluene. Compatibilty with ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is an ultra high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply or dangerous and expensive gas ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Recommended for ambient air monitoring applications, waste anesthetic monitoring, anesthetic leak detection, and hospital workplace exposure ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical research or production purposes. The Series 4040 can produce gas concentrations from ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
U.S. EPA allows critical orifices to be used as calibration standards. This mether calibration set is used for calibrating dry gas meters in order to perform post-test calibration audits. The orifice calibration set contains five of our critical orifices with 1/2″ quick connects and software. Re-calibration recommended annually. Calibration Orifice Set, 6 Calibrated Critical Orifices. and ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Chromatotec® Group distributes Process Quadrupole Mass Spectrometers from InProcess Instruments in France, Italy, Benelux, Saudi Arabia and Taiwan. Learn more about this partnership following this link. With this product line, we can now offer flexible and customer-specific solutions ideal for very fast, precise and continuous multi-component gas analysis. These complete systems include ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
airmo HCHO is designed for the measurement of formaldehyde in air or pure gases. The airmo HCHO is an autoGC using FID detector dedicated to Formaldehyde monitoring at low concentration. This instrument uses a valve with a single sorbent trap, a metallic column and a ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 844 Mhr analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 Mhr is modular designed and capable of simultaneously measuring NO, NO2 and NOX from hot and humid gas sources without additional cooler. The new and intuitive graphical user interface “GUI“ also individually displays and connects to ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for flame, graphite furnace, and hydride techniques. This flexible all-rounder has an automatic atomizer that changes for use with flame, hydride, and graphite furnace techniques and is upgradeable to direct solid sampling; all combined on one ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you