Calibration Gas Equipment For Monitoring And Testing Available In Hungary
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
High accuracy and precision: Gas Endeavour III is an advanced laboratory instrument platform designed for precise evaluation of gas production or consumption in both batch and continuous processes. With its fully automatic operation, user-friendly interface, and high reliability, Gas Endeavour III offers exceptional ease of use. The instrument features 18 or 9 parallel channels, allowing for the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
PC-controlled multipoint multi-component span gas generation for up to 32 measuring stations or 25 m³ span gas / hour. Up to 16 bottled span gases can be connected and mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The Pure Air Generator PAG 003 is your source of efficient and reliable zero air. It eliminates the need for ultrahigh-purity zero air cylinders. The PAG 003 is specifically designed for CLD analyzers measuring sub ppb levels. Other trace gas analyzers benefit as ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
H2S analyzer adopts catalytic conversion method to convert sulfurous gas into SO2 and then employs sluorescence method to measure the concentration, which is reliable, accurate and convenient. The available range cobers from 0-500ppb to 0-20pm. The AM-5105 H2S analyzer designed and manufactured by ZETIAN, one of the best ambient air quality monitoring system manufacturers, can be used on many ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
MicroLab all-in-one automated lubricant analysis system for comprehensive, on-site testing. The MicroLab combines automation and artificial intelligence in an all-in-one oil analysis tool, making on-site oil analysis possible for any ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The instrument ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
MicroLab all-in-one automated lubricant analysis system for comprehensive, on-site testing. The MicroLab combines automation and artificial intelligence in an all-in-one oil analysis tool, making on-site oil analysis possible for any ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for flame, graphite furnace, and hydride techniques. This flexible all-rounder has an automatic atomizer that changes for use with flame, hydride, and graphite furnace techniques and is upgradeable to direct solid sampling; all combined on one ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for graphite furnace and hydride technique. Highly sensitive trace analyzer for recurring measurement tasks, upgradeable for direct solid ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q2 is a Portable Oxygen and CO2 analyzer, used for research or package testing. The Q2 is a portable headspace analyzer for measurement of O2 and CO2 levels in gas flushed MAP packages (such as coffee or meat products). Alternately, the Q2 can be used for portable O2 and CO2 measurements for research applications (such as cell culture incubators). It weighs only 2 lbs, and comes with ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC PID for automatic monitoring of compounds, in air, water or soils: This instrument uses a port valve with a loop, and a metallic 0.53 mm ID column. It has a minimum detection level of ppb. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19' rack 4U. Isothermal oven in standard (programmed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you