Calibration Gas Equipment For Monitoring And Testing In Bulgaria
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for graphite furnace and hydride technique. Highly sensitive trace analyzer for recurring measurement tasks, upgradeable for direct solid ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful: wide dynamic range and continuous calibration. Cost-effective: high sample throughput and fast analysis times. Versatile: also for direct solid ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MC-3000 generates a continuous stream of a mercury vapor loaded gas in order to check or calibrate mercury analyzers. An exactly adjustable carrier gas stream (normally air or nitrogen) is loaded with mercury in a first step. In a second step the gas is supersaturated by cooling. Subsequently the excess mercury is condensed in a special cell to get exact saturation. The gas is then diluted, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for flame, graphite furnace and hydride technique. The flexible tandem instrument with two sample compartments for flame, hydride and graphite furnace technology, upgradeable for direct solids ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Automatic gas calibration is available by using calibration gas and prefilled calibration cell. The gas cell is filled with a mixture of gases allowing all gases measured by the system to be checked. All data from gas calibration and automatic QAL 3 checks are stored in separate calibration data files, and are sent to the reporting software for ...
-
PremiumManufactured by ENVEAbased in FRANCE
Pure air generator, capable of continuous delivery of up to 20 standard liters per minute (SLPM) of dry, contaminant-free air. The ZAG 7001 is a powerful stand-alone system: it does not require the supply of compressed ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful high-end AAS devices for highly efficient and sensitive multielement analysis for research and everyday lab use. Easy to use – simple multielement analysis with no need for lamp changes. Powerful – wide dynamic range and continuous calibration. Cost-efficient – high productivity and operating costs that remain ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Employs FID method featuring superb response characteristics and stability. Allows highly sensitive and highly precise continuous measurement. Measurement can be performed in 7 ranges and in a range ratio of 0 to 10/30,000 ppm C, making it possible to safisfy a wide variety of ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Dilution of gases with high accuracy and precision requires high quality mfc’s, especially for high dilution ratios and ranges. Consequently HORIBA’s APMC-370 is equipped with digital mfc’s. These mfc’s are factory calibrated, optional also with a special Polynomial Calibration. HORIBA Europe‘s APMC-370 is designed to calibrate gas analyzers manually, remotely ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an industry-standard ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
From environmental monitoring to developing new energy sources and chemicals for the new era, gas analysis systems are faced with needs and challenges that have changed dramatically over time. Responding to these new needs, HORIBA has developed the VA-3000, the versatile gas analyzer that's ready for the future. A single analyzer is now capable of measuring a wider selection of gas components ...
-
PremiumManufactured by ENVEAbased in FRANCE
This is an accesory for the UT-3000 Mercury Ultratracer in monitoring systems at low to intermediate mercury concentrations. The Mercury Instruments Automatic Calibration Unit consists of a specially designed mercury vessel containing elemental mercury of high purity, surrounded by an aluminium jacket cooled by a thermoelectric cooler. For automatic calibration a motor driven syringe extracts a ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for graphite furnace and hydride techniques. Sensitive trace analysis for recurring measurement tasks with higher sample throughput, upgradeable to direct solid sampling. Easy to use - simple multielement analysis with no need for lamp changes. Powerful - wide dynamic range and continuous calibration. Cost-efficient - high productivity and operating costs that remain ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in coal and biomass storage ...
-
PremiumManufactured by ENVEAbased in FRANCE
This accessory meant for manually calibrating the UT-3000 Mercury Ultratracer. The calibration unit is connected to the UT-3000 Ultratracer. With a special syringe a defined volume of mercury containing gas is drawn from the calibrator and injected into the calibration port of the UT-3000. After entering the volume of the injected gas, the UT-3000 will automatically calculate the mercury mass ...
-
PremiumManufactured by ENVEAbased in FRANCE
Technically identical to the SM-4, this device is ideal for mercury determination at varying sites. The SM-4 Mobile by Mercury Instruments has been developed on the basis of the well proven SM-4 mercury stack gas monitor. Its measurement principle and technique, its thermocatalytic reactor, the detector and the sample probe are identical with those of the stationary ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for flame and hydride techniques. The flame AAS for cost-effective and efficient routine analysis of elements in a wide range of applications. Easy to use - simple multielement analysis with no need for lamp changes. Powerful - wide dynamic range and continuous calibration. Cost-efficient - high productivity and operating costs that remain ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for flame, graphite furnace, and hydride techniques. This flexible all-rounder has an automatic atomizer that changes for use with flame, hydride, and graphite furnace techniques and is upgradeable to direct solid sampling; all combined on one ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you