Calibration Systems Applications

22 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Calibration Systems ×

Moisture Monitoring for Instrument Air & Compressor Systems

by Moisture Control & Measurement Ltd     based in Wetherby, UNITED KINGDOM

The presence of humidity in a blanketing gas for sensitive instruments can cause corrosion problems, rapid changes incalibration and loss of sensitivity. The presence of oil contamination in compressors can cause similar problems.

Noise monitoring for airports

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

Airports, small and large, use noise and operations monitoring systems to reduce the noise of flight operations in the surrounding community.  Noise monitoring is generally used to evaluate noise abatement programs and to develop aircraft departure and arrival procedures that minimize the impact of aircraft noise based upon altitude, flight path, and time of day.  Noise monitoring is linked with radar tracking so that specific aircraft can be identified when noise limits are exceeded and so operational requirements can be enforced.
Larson Davis provides noise monitoring systems to airports, consultants, and system integrators with the technology and support to make a successful program.

Production of high-accuracy ethanol calibration gas

by MKS Instruments, Inc.     based in Andover, MASSACHUSETTS (USA)

Fast and highly accurate analyzer system was needed for ethanol calibration gas standards. Precisive`s OXS-3100-HC configured for ethanol gas was selected due to its sub-ppm repeatability and high stability.

Gas detection for the oil and gas industry

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

Supported by the global reach of its mature and dedicated distributor network, Crowcon has an enviable track record in the oil and gas industries. Read on to learn more about the applications, challenges and gas detection solutions typically seen in this demanding industry, or learn about how Crowcon recently helped Indian company Cairn Energy at their Mangala oil and gas processing facility. 

Application package glass

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

Laboratory Weighing - Pipette Calibration

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

To ensure data integrity regular pipette performance testing and pipette calibration are fundamental to monitor the accuracy of your pipettes. Testing pipette performance with a balance plays a critical part in this testing approach. METTLER TOLEDO offers solutions for occasional performance testing up to professional pipette calibration according to ISO8655. We can support you in finding the right mix between self made pipette calibration and professional service support tailored to your needs.

Application package Ash for analysing oxidic materials

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

This application package is a `ready to go` calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench.

Water Vapor Permeation Analyzers for Packaging Industry

by Systech Instruments Ltd     based in Thame, UNITED KINGDOM

For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

Capabilities of the Adsorbent Tube Injector System (ATIS™)

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is constructed of glass and stainless steel. The calibration standard is injected by a syringe through a replaceable septum in the center of the injection glassware, which is heated. After enough time has elapsed, typically less than five minutes, the tube is removed from the ATIS and analyzed using the appropriate analytical technique for that adsorbent tube.

Sound Instrumentation for Calibration

by Norsonic AS     based in Lierskogen, NORWAY

Unfortunately, the word calibration has ended up having two meanings; viz. to describe the use of a sound calibrator in connection with a measurement and to describe periodic verification which is carried out in a Calibration Laboratory.

Laboratory Weighing - Weight Calibration

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Balances should always be tested with calibrated weights you can rely on and trust. Only calibrated weights are traceable to the International Prototype Kilogram at the BIPM (Bureau International des Poids et Measures) in Paris and ensure accurate weighing results.

Application package cement

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

This application package is a `ready to go` calibration kit for xrf instruments. It contains all parts to perform a complete cement calibration: - Calibration set prepared from CRM as glass beads 40mm - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 2x control samples for validation each 10g powder for preparation on site - Flux FX-X100 FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

Facilities management in line air flow meter solutions

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra’s offers a complete line of precision flow solutions for any gas, liquid or steam measurement to improve energy efficiency in all facilities management applications. Our mass vortex meters are used to allocate steam, our in line thermal mass flow meters track and allocate natural gas and compressed air usage, and our clamp-on and insertion ultrasonic meters provide accurate water and water-based fluid measurement.

Continuous Emissions Monitoring Calibration Systems (CEMCS)

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers.

Computerized instrumentation for the medical gas flow and scientific research

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate gas mixes for any laboratory or clinical need. You can generate the specific reduced oxygen environments needed for anerobes as well as the enriched oxygen environments needed in a variety of cellular, viral and high density culture applications. Systems can also be used to create a specific and stable gaseous environment in a clean room. In all cases, the Environics Atmosphere Mixers allow you to use less expensive single-gas cylinders or bulk tanks in place of a high number of expensive blended cylinders.

Ambient Monitor Gas Calibration with Ozone Generators

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Environics® Ambient Monitor Calibrator with Ozone Generators facilitate dynamic calibration of ambient air analyzers. These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. The Series 6100, Series 6103 and Series 9100 all meet or exceed U.S. Environmental Protection Agency requirements.

Measurement of oil in wax for oil & gas industry

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

The measurement of oil in wax is important within the oil refining industry because wax derived from petroleum sources is an important by-product of the oil refining process. These waxes are widely used in the manufacture of many materials and products as they have the ability to confer specific mechanical and physical properties such as flexibility, hardness and friction. A wide variety of waxes is manufactured with specific characteristics. One of the most critical factors controlling wax properties is the oil content. This means routine measurement of the content of oil in wax is essential for consistent control of the production process. Our benchtop NMR analyser MQC systems provides a fast, simple and accurate method of measuring oil in wax. The MQC may be calibrated to provide results equivalent to ASTM D721-06 and IP 158.

calibration gas

by AG Gases Ltd     based in Stoke-on-Trent, UNITED KINGDOM

calibration gas , British specialty gases company, with a local North Africa presence. We can supply you with high quality gas mixtures for a wide range of applications including Environmental Monitoring, Gas Detection, Mud Logging, Laser Cutting, and Laboratory Analysis. Our gas mixtures are used in the Oil, Gas and Petrochemical industries Our main focus is to give our customers gravimetrically produced, high precision calibration gas mixtures conforming to ISO 6142, along with a range of high purity gases and pressure control equipment, used for instrumental analysis and gas detection applications. AG Gases' senior management have many years experience in the European and International markets and now offer this knowledge to benefit Egyptian and North African customers.

Application package for analysing slags and filter dusts

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

This application package is a `ready to go` calibration kit for xrf instruments. The analysis of slags and filter dusts in the metal industry delivers important information about the production process. FLUXANA has developed a fusion slag + filter dusts method which allows the direct analysis of most common slags and filter dusts. Elements of interest and calibrated concentration ranges can be selected individually by the customer.

Need help finding the right suppliers?

Let the XPRTs do the work for you