Calibration Systems News

  • Geotech sets the industry standard with ISO 17025 Calibration and five days servicing

    Geotech is a trusted manufacturer and supplier of portable and fixed gas analysers for a wide range of industries.  With our vast network of established international distributors, we are able to supply to and support our customers in over 60 countries worldwide. We offer a total support package for our entire product range from our UK-based Service Centre.  The in-house dedicated and ...


    By Geotech

  • Proline 300/500 – Flow measuring technology for the future

    For 40 years, Endress+Hauser has been offering one of the most comprehensive product ranges worldwide for flow measurement of liquids, gases and steam. The Proline device family has contributed significantly to this success and is now once again wowing users with unique innovations to ensure highest process and product quality. The Proline 300/500 generation combines Proline sensors, which have ...


    By Endress Hauser

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • Renishaw unveils the new XM-60 multi-axis calibrator

    Renishaw, the world-leading metrology specialist, will exhibit its new XM-60 multi-axis calibrator at IMTS 2016, Chicago, USA and AMB 2016, Stuttgart, Germany. The XM-60 is capable of measuring all six degrees of freedom from a single set-up, in any orientation for linear axes. It offers significant improvement in simplicity and time ...


    By Renishaw plc

  • Measurement Science and Technology Paper

    Michael Broughton, Head of AMETEK Land's UKAS Calibration Laboratory worked in collaboration with the University of Sheffield and the National Physical Laboratory on a recently published paper considering the potential for improved radiation thermometry measurement uncertainty through implementing a primary scale in an industrial laboratory.    ...


    By AMETEK Land

  • New Full-Color Poster Helps Keep Moisture Measurements on Target

    The "Moisture Matters" poster-applicable across many industries and complimentary from METTLER TOLEDO-provides tips for instrument handling, method creation, and sample preparation to help ensure accurate, repeatable moisture analysis results and improve product quality. METTLER TOLEDO is pleased to present a new reference poster entitled " ...


    By Mettler - Toledo Int. Inc

  • InnovaMass iSeries Vortex Mass Flow Meter Nominated for Flow Control Innovation Award!

    Sierra has a tradition of innovation spanning over 40 years and this spirit of innovation continues to drive our engineers each day!  We are delighted that Flow Control has noticed. Each year, Flow Control, a flow measurement industry magazine, selects fluid handling products they feel are worthy of being called ...


    By Sierra Instruments, Inc.

  • How to Set Up a Perimeter Monitoring Kit

    It’s that time of year again: construction season!  Which means perimeter monitoring has again become necessary to measure worker exposures to noise, dust, gas emissions, and provide documentation that you’ve implemented procedures to keep the surrounding community safe from these issues. RAECO Rents perimeter ...


    By Raeco Rents

  • F&J World Calibrator PC Interfaceable

    F&J SPECIALTY PRODUCTS, INC. (F&J) an innovative manufacturer of air flow calibration systems for many industries has developed a new "High Flow" air flow calibration systems product line. Calibration systems are available for flow rates as high as 1000 m3/hr (600 CFM). The high flow calibration ...

  • Hands-on RDE expertise

    Due to the Real Driving Emissions (RDE) tests decided on by the European Commission for 2017, vehicle manufacturers face new challenges. The primary topics of interest for the automotive industry in connections with RDE currently focus on emissions and consumption measurements in real traffic. To give customers and other interested parties an overview of the current state of the discussion and ...


    By HORIBA Europe GmbH

  • Addition of in-built calibration gas dilution function to our range of FTIR Gas Analysers

    Protea are proud to announce the addition of in-built calibration gas dilution function to our range of FTIR gas analysers. This feature, using precision a Mass Flow Controller within the analyser, allows the FTIR user to dynamical calibrate their FTIR gas analyser from within the FTIR software at the touch of a button. Without the need for expensive external gas dilution equipment, FTIR gas ...


    By Protea Limited

  • MEMS based Thermal Mass Flow Technology

    Axetris uses proprietary MEMS-based thermal mass flow measurement technology to design its range of mass flow solutions. The temperature differential of a miniscule sample of the gas is measured during flow across a MEMS chip (see picture). The temperature differential thus measured results in a mass flow measurement that is the building block to a superior mass flow product. Compared with a ...


    By Axetris Ag

  • Seatronics Achieve Valeport Calibration Accreditation

    As recently reported in the WorldOil online journal, Seatonics have been awarded calibration accreditation for the extensive range of Valeport Hydrometric & ROV Equipment that it operates. Kevin Edwards, Valeport's Sales & Marketing Manager commented: "Monitoring third party calibration ...


    By Valeport Ltd

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • EN ISO 17025 calibration

    On rare occasions, e.g. when a device is used for measurement of emissions of industrial objects (and based on that a fine for environment pollution is calculated) the device must hold a valid calibration certificate, issued by authorised, accredited laboratory. madur co-operates with accredited laboratory, therefore it is possible to deliver any device with the mentioned ISO 17025 certificate. ...


    By madur Polska Sp. z o.o.

  • AMETEK Land India secures NABL calibration lab accreditation

    The AMETEK Land India laboratory, which was established and began calibration and repair operations in 2011, is the first OEM (original equipment manufacturer)-approved facility to receive NABL accreditation. It is accredited to offer thermal calibration in the range of 0ºC to1600ºC for tests carried out in-house and 0ºC to1200ºC for on-site calibrations. In addition, the ...


    By AMETEK Land

  • Novel contactless flow measurement

    The new measurement method has been developed in close cooperation with the University of Strasbourg. A hydraulic model perfectly adjusted to the conditions on the measurement site is the basis for accurate measurements. This model utilises two level measurements to determine the flow rate. Both levels are measured at a known distance, such as in two consecutive shafts within a channel system. ...


    By NIVUS GmbH

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas

  • Natural Environment Scientists Double the Field Accuracy of Your Next Infrared Thermometer

    You may have noticed that some of your infrared thermometer measurements have been inconsistent and non-repeatable under apparently identical conditions.  There is a reason for these errors.   Here is that reason.  When an infrared thermometer is calibrated indoors, it will read low by 1°-2° when used ...


    By Everest Interscience

  • Humidity calibration in non-air gases at above-atmospheric pressures

    Many laboratories can only perform humidity calibrations in air at atmospheric pressure. However, industrial humidity measurements may be at high pressures, or in other gases. For best validity, humidity calibrations should ideally be in the gas medium of use, because the performance of some hygrometers can depend on gas species and pressure. Calibration ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you