calibration gas mixtures Equipment

33 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Calibration Systems ×

  • Keyword: calibration gas mixtures ×

Calibration Gas Mixtures

by Scientific and Technical Gases Ltd     based in Newcastle-under-Lyme, UNITED KINGDOM

Scientific and Technical Gases can supply custom made gas and liquid mixtures for all analytical, detection and process applications in a wide range of container sizes.

Calibration Gas & Liquid Mixtures

by Chemtron Science Lab. Pvt. Ltd.     based in Mumbai, INDIA

The composition of the mixtures available is practically infinite. It is restricted only by the physical and chemical properties, health, safety norms and the Stability and quality of the final mixture. At CSL we offer our clients any desired preparation tolerance and certification accuracy depending on the mixture components. We prepare mixture ...

Sonimix - Model 2106 PreDivider - Binary Gas Calibration System

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The binary Predivider Sonimix 2106 is based on the principle of gas stream through sonic nozzles and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.) The Sonimix 2106 PreDil is mainly used to increase the dilution range of the Sonimix 2106 or 7000 gas dividers.

MCZ - Model MK2 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The use of permeation tubes instead of bottled span gases yields a reasonably priced solution for the span gads generation of, for example, SO2 or hydrocarbon components.

MCZ - Model MicroCal5000 - Gas Compounding System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production processes.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

MCZ - Static Volumetric Injection According to ISO 6144

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Mixing chamber (injection chamber) to inject a known volume of a component to generate a gas mixture with known concentration. The process is the primary standard to generate gas mixtures to calibrate gas analyzers. The development was for the most part carried out by the National EU Clean Air Reference Lab, a division of the Federal Environmental ...

MCZ - Model CGM - Compact Calibration System for PC-Controlled

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Compact system for PC-controlled multipoint multi-component span gas generation for up to 25 l of span gas / hour. Up to 8 gases can be mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ozone.

MCZ - Reference Lab for Quality Assurance and Interlaboratory Testing

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

PC-controlled multipoint multi-component span gas generation for up to 32 measuring stations or 25 m³ span gas / hour. Up to 16 bottled span gases can be connected and mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ozone.

MCZ - Model MK5 BNT - Modular Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation oven.

IONICON - Model LCU - Liquid Calibration Unit

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

The IONICON Liquid Calibration Unit (LCU) evaporates aqueous standards into a gas stream, resulting in a gas flow containing compounds at defined trace concentrations. This gas can be used for precise calibration of trace gas analyzers over an extensive range of compounds and concentrations.

RWC - Model 0200-10-1 Ch - 0200-10-1 Chlorine 20 ppm/Air

by RWC Testing & Lab Supplies     based in El Paso, TEXAS (USA)

Kits Include: 1 Sample Gas Cylinder. 1 Zero Gas Cylinder. 1 Regulator and 1 Plastic Case.

Model DIL-CAL Series - Multipoint Dilution Calibrator

by PEUS-Instruments GmbH     based in Gaggenau, GERMANY

Dilution ratio : 1/100 to 100/100.Input gas mixture: 1 ppm to 1000 ppm . Precision: > +/- 1% Outflow: 500 to 1500 ml/min .Pressure: 4 bar max (72 psi max) . Presentation: module &19” rack casing

Precision Gas Mixtures in Refillable Cylinders

by Cryoservice Limited     based in Worcester, UNITED KINGDOM

Mixtures are blended gravimetrically in an in-house laboratory using highly accurate balances routinely calibrated by a UKAS accredited authority to ensure the highest degree of accuracy. Each mixture is custom blended according to a unique recipe and an extensive library of gases allows almost limitless combinations of components and ...

Calibration Gas

by Foxcroft Equipment & Service Co. Inc.     based in Glenmoore, PENNSYLVANIA (USA)

These cost effective cylinders are filled with certified precision gas mixtures for calibration and response check “bump testing” of gas leak detectors or research instrumentation. “Home made” chlorine gas is uncontrollable as well as dangerous. The high concetration of chlorine in a 150 lb process cylinder is lethal to ...

Dynacalibrator - Model 230 - Calibration Gas Generators

by VICI Metronics     based in Poulsbo, WASHINGTON (USA)

With a flexible flow metering system to maintain a constant carrier flow through the permeation chamber, the Model 230 allows the dilution flow to be varied over a wide range, generating the spectrum of concentrations required for checking analyzer linearity. Like all Dynacalibrators, its large permeation chamber is big enough to accomodate ...

Environics - Model Series 2000-U - Ultraclean Computerized Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Purity of calibration gas is assured with the Series 2000 Ultraclean Gas Calibration system. Manufactured with metal seal Mass Flow controllers and orbitally welded joints, this system has minimal dead volume and maintains an ultra-low leak rate to prevent atmospheric contamination of gas calibration standards.

MKAL - Calibration Modules

by Breitfuss Messtechnik GmbH (BFM)     based in Harpstedt, GERMANY

Breitfuss Messtechnik manufactures calibration gas generators for use in ambient air monitoring stations, calibration gas laboratories, and analytical laboratories. Our product range includes calibration gas generators for automatic checking of individual analyzers (MKAL) and computer-controlled systems for manufacturing complex gas mixtures in ...

Leman - Model MPC2-ST & MPC2-HC - Multipoint Double Channel Permeation Calibrator

by Leman Instruments SAS     based in Archamps, FRANCE

Characteristics: Final concentration: from 5 ppb to 5 ppm, depending on the permeation tube. Diluted gas: any gas stable in permeation tube between 35 and 80°C. Carrier gas: AIR, N2, CO2 and any other non-corrosive gas. Outflow: 500 to 1500 Nml/min during calibration ( per channel) . 50 to 80 Nml/min high concentration mixture rest of time ( ...

Related Terms for calibration gas mixtures

Need help finding the right suppliers?

Let the XPRTs do the work for you