calibration source Equipment available in Malawi

Available in Malawi| Near Malawi
102 Results found

We couldn't find any calibration source equipment in Malawi

Here is a list of results available in Malawi

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Calibration Systems ×

  • Keyword: calibration source ×

  • Available in: Africa ×

  • Available in: Malawi ×

Model 408 Series - Nitric Oxide Calibration Source

by 2B Technologies     based in Boulder, COLORADO (USA)

The Model 408 Nitric Oxide Calibration Source is a portable source of nitric oxide that allows one to calibrate any nitric oxide monitor.  The instrument scrubs NO from ambient air and produces either zero air or air having a mixing ratio of NO in the range 10-1,000 parts-per-billion by volume (ppbv).  The desired NO concentration is ...

McPherson - Model 625 - Mercury Calibration Source

by McPherson     based in Chelmsford, MASSACHUSETTS (USA)

Mercury calibration lamps are small, rugged, and easy to use. Because the lamps operate at low pressure, well spaced, intrinsically narrow and bright Mercury emission lines dominate the output spectrum. Background between the lines is very low. The output wavelengths are 

Model 306 Series - Ozone Calibration Source

by 2B Technologies     based in Boulder, COLORADO (USA)

The 2B Technologies Model 306 Ozone Calibration Source is a portable source of ozone that allows you to calibrate any ozone monitor - not just those manufactured by 2B Tech. The instrument scrubs ozone from ambient air and produces any mixing ratio of ozone in the range 30 to1,000 ppbv. The desired ozone concentration is chosen from the ...

Landcal - Model P550P - Low Temperature Portable

by AMETEK Land     based in Dronfield, UNITED KINGDOM

Portable Primary source - up to 550 °C/ 1020 °F. LANDCAL P550P is a portable, variable temperature, blackbody radiation source. It is a primary standard designed for high precision calibration of low temperature radiation thermometers.

Landcal - Model R1500T - High Temperature Transport

by AMETEK Land     based in Dronfield, UNITED KINGDOM

High Temp. Transportable blackbody reference source. LANDCAL R1500T is a high temperature, transportable blackbody radiation source designed for calibration of a range of thermometers such as System 4 and Fibroptic thermometers. R1500T is a reference standard source giving a resolution of ±1°C/2°F.

Landcal - Model R1200P - High Temperature Portable

by AMETEK Land     based in Dronfield, UNITED KINGDOM

Portable Reference Source - 350 to 1150 °C/650 to 2000 °F. LANDCAL R1200P is a high stability portable, blackbody reference standard source. R1200P can be used for both on-site or laboratory calibration of a range of short wavelength thermometers, such as System 4 and Fibroptic radiation thermometers.

Landcal - Model P1600B2 - High Temperature Bench-Mounted

by AMETEK Land     based in Dronfield, UNITED KINGDOM

Bench-mounted, primary standard, var. temp. source. LANDCAL P1600B2 is a new improved bench mounted, primary standard, variable temperature source designed for testing and precise calibration of most high temperature industrial radiation thermometers, thermographic equipment and thermocouples.

Landcal - Model P80P - Low Temperature Portable

by AMETEK Land     based in Dronfield, UNITED KINGDOM

Portable Primary source - up to 80 °C/ 175 °F. LANDCAL P80P is a portable, variable temperature, blackbody radiation source. It is a primary standard designed for high precision calibration of low temperature radiation thermometers with sub-zero measurement capability.

Landcal - Model P1200B - Mid-Range Temperature Bench-Mounted

by AMETEK Land     based in Dronfield, UNITED KINGDOM

Bench-mounted, primary standard, var. temp. source. LANDCAL P1200B is a bench mounted, primary standard, variable temperature source designed for testing and precise calibration of most industrial radiation thermometers, thermographic equipment and thermocouples.

Model CAL-2000 - Mercury Argon Calibration Source for UV-VIS

by Ocean Optics - a Halma Company     based in Dunedin, FLORIDA (USA)

The CAL-2000 Mercury Argon Calibration Source is a spectral wavelength calibration source for spectrometer systems. The CAL-2000 produces low-pressure Mercury and Argon atomic emission lines from 253-1700 nm for use in performing fast, reliable spectrometer wavelength calibrations.

AR-1 Argon Calibration Source

by Ocean Optics - a Halma Company     based in Dunedin, FLORIDA (USA)

The AR-1 Calibration Source is a spectral wavelength calibration source specifically designed for NIR spectrometers like our NIR256 and NIR512 models. The AR-1 produces low-pressure argon emission lines from 696-1704 nm for use in performing fast, reliable spectrometer wavelength calibrations. The spectral emission lines are printed on the lamp's ...

Model LDLS EQ-99CAL - Broadband, High Brightness Calibration Source System

by Energetiq Technology, Inc.     based in Woburn, MASSACHUSETTS (USA)

Traditional calibration sources for radiometric calibration, such as Deuterium, Quartz Tungsten Halogen, and Xenon-arc, all have limitations in spectral range. No one source covers the full UV-Visible range from 200nm-800nm with output at comparable levels across that spectrum. In addition, traditional sources require recalibration after 100 hours ...

TAPI - Model T700H - Source Gas Blending and Dilution Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T700H is a microprocessor controlled dilution system for calibration of continuous emissions monitoring gas analyzers. It enables significantly reduced cylinder use and cost while improving on-site flexibility for gas concentrations and converter efficiency checks. The instrument is designed to meet or exceed the performance requirements ...

HG-1 Mercury Argon Calibration Source

by Ocean Optics - a Halma Company     based in Dunedin, FLORIDA (USA)

The compact, low-cost HG-1 Mercury Argon Calibration Source is a spectral wavelength calibration source for UV-VIS-Shortwave NIR spectrophotometric systems. The HG-1 produces mercury and argon lines from 253-1700 nm for use in performing fast, reliable spectrometer wavelength calibrations. Easily identifiable mercury and argon spectral emission ...

E Instruments - Model TCS 140 - Dry Block & Liquid Bath Calibrator

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

The TCS 140 portable source offers fast temperature calibration in an easy to use unit designed for low temperature applications. The calibrator can be used as a Dry Block, a Liquid Bath, and a Blackbody source for infrared thermometers. The standard configuration includes both the 6 hole 157mm deep metal block insert, and the liquid container.

E Instruments - Model TCS 650 - Dry Block Multifunction Temperature Calibrator

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

The TCS 650 portable medium temperature (35°C Ta to 650°C) source offers fast temperature calibration and high stability. The standard configuration includes the 6-hole 140mm deep metal block insert. Medium temperature multifunction dry block furnace for measuring and calibrating thermocouples, resistance thermometers, transmitters, and ...

E Instruments - Model TCS 1200 - Multifunction High-Temperature Calibrator

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

The TCS 1200 portable very high temperature (570°C to 1200°C) calibrator is an easy to use, portable and rugged unit. It can be used as a Dry Block and a Black body source for infrared thermometers. The temperature control allows very fast temperature stabilization and high stability. The standard configuration includes the 4-hole 80mm ...

Brüel & Kjær - Model Type 4231 - Sound Calibrator

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

A handy, portable sound source for calibration of sound level meters and other sound measurement equipment. The calibrator is very robust and stable, and conforms to EN/IEC 60942 Class LS and Class 1, and ANSI S1.40-1984. For maximum confidence in your measurement results you can quickly compensate for local measurement conditions by calibrating ...

E Instruments - Model DPC-2000 - Multifunction Documenting Process Calibrator

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

Measure and simulate T/Cs (13 types), RTDs (13 types), Ohms, current, voltage, frequency and pressure; source pulse trains. Highest accuracy in class to 0.015% of reading. Pressure module communication port compatible with 29 pressure modules. Isolated mA/V read-back circuit for complete transmitter calibration. Built-in 24 V supply can drive 4 ...

Norsonic - Model Nor1254 - Sound Intensity Calibrator

by Norsonic AS     based in Lierskogen, NORWAY

The sound intensity calibrator Nor1254 is a applicable for residual intensity testing, sound intensity level calibration and particle velocity calibration as specified in EN IEC 61043 Electroacoustics - Instruments for the measurements of sound intensity - Measurements with pairs of pressure sensing microphones.

Need help finding the right suppliers?

Let the XPRTs do the work for you