gas calibration Equipment available in Lithuania

Available in Lithuania| Near Lithuania
170 Results found

We couldn't find any gas calibration equipment in Lithuania

Here is a list of results available in Lithuania

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Calibration Systems ×

  • Keyword: gas calibration ×

  • Available in: Europe ×

  • Available in: Lithuania ×

Sonimix - Model 3030 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 3030 is a calibration system, specially developed for simple applications.

Sonimix - Model 3014 - Permeation Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

All those which cannot or hates transporting gas cylinders will appreciate the Sonimix 3014. Based on mass flow controller, critical orifices (nozzles) and high stability mechanical pressure regulators, the Sonimix 3014 is able to generate gases such as NO2 or SO2 using dilution or permeation technology. No cylinders, Accurate, Flexible and ...

Sonimix - Model 2106 PreDivider - Binary Gas Calibration System

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The binary Predivider Sonimix 2106 is based on the principle of gas stream through sonic nozzles and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.) The Sonimix 2106 PreDil is mainly used to increase the dilution range of the Sonimix 2106 or 7000 gas dividers.

Sonimix - Model 2130 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 2130 is the ideal device to test the efficiency of a NOx converter. With it’s built in ozone generator and the use of NO cylinder, it’s easy to generate stable value of NO and NO2. This technology is regulary used in Emission and Automotive applications. This device uses the US EPA method to test NOx converter. US EPA Method, Simple ...

Sonimix - Model 3012/3022 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The multigas calibrator with GPT, ozone and self re‐generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.

TAPI - Model 702 - Precision Gas Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 702 Precision Calibrator provides an ideal means of calibrating ambient air analyzers, in an economical, high-value manner.

TAPI - Model T750 - Portable Gas Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded travel case which includes an integral ...

Sierra CalTrak - Model 500 - Modular Gas Flow Calibrator

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra's CalTrak 500 is a high-accuracy, modular primary standard gas flow calibrator for all inert gases. Fast and portable, the 500 offers standardized accuracy of ±0.35% for customers who have many flow instruments to be validated or calibrated frequently. Primarily used for standard calibration and ...

IONICON - Gas Calibration Unit (GCU) - Advanced Dynamic Gas Dilution System

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

For most trace gas analyzers, calibration is the standard practice to ensure accurate quantification of target substances. The IONICON GCU has been developed to produce precisely controlled concentrations at trace levels with the possibility to adjust the gas matrix humidity and CO2 content for calibration at sample gas conditions. GCU has been ...

Sabio - Model 4010 - Gas Dilution Calibrator

by Sabio Instruments, a division of Sutron Corporation     based in Georgetown, TEXAS (USA)

Users can easily perform gas dilution, ozone, and GPT calibration with Sabio Instrument’s intelligent Model 4010 gas dilution calibrator. The Model 4010 was designed to set a new standard of quality and performance for gas dilution calibrators. Enhanced with the latest technology, Sabio’s Model 4010 calibration system is an uncomplicated and ...

Sabio - Model 2010 - Portable Gas Dilution Calibrator

by Sabio Instruments, a division of Sutron Corporation     based in Georgetown, TEXAS (USA)

Users can easily perform gas dilution, ozone, and GPT calibration with Sabio Instruments, Inc.’s intelligent portable Model 2010 gas dilution calibrator. The Model 2010 was designed to be small in size and weight for users who require true portability. Enhanced with the latest technology, Sabio’s Model 2010 calibration system is an ...

Sabio - Model 2010D - Gas Dilution Calibrator

by Sabio Instruments, a division of Sutron Corporation     based in Georgetown, TEXAS (USA)

The 2010D Intelligent Gas Dilution Calibrator caneasily perform gas dilution, multi-source gas blending, ozone and gas phase titration (GPT) for environmental, laboratory, or point source monitoring calibrators. Enhanced with the latest technology, Sabio’s Model 2010D calibration system is an uncomplicated and effective way to precisely control ...

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

CalTrak - Model 800 - Gas Mass Flow Standard

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The CalTrak® 800 is the most accurate commercially available portable primary gas flow standard. The 800 brings world-class accuracy to your flow lab with a standardized accuracy of ±0.15% of reading, superior to all other commercial laboratory standards. Primarily used for standard calibration and verification of mass flow meters, ...

CalTrak - Model XL Series - High-Flow Gas Mass Flow Calibrator

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The CalTrak® XL is the leading high-flow primary standard calibrator on the market today. With increased demand for higher flows of process gas, there is a requirement to validate and calibrate high flow gas meters and controllers. Designed to replace aging bell provers, the XL meets that need with an impressive standardized accuracy of ...

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

MCZ - Model MK2 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The use of permeation tubes instead of bottled span gases yields a reasonably priced solution for the span gads generation of, for example, SO2 or hydrocarbon components.

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Baseline - Model Series 8990 - Permeation Calibrator

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Baseline Series 8990 Permeation Calibrator allows a user to generate custom gas calibration standards. Using certified permeation devices and precision flow rates a user can generate a range of accurate gas standards. This ability relieves the user from purchasing multiple expensive bottled gasses, allows the replacement and addition of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you