Gas Calibration Standard (Calibration Systems) Equipment Available In Gambia
-
Manufactured by Chemtron Science Laboratories Private Limitedbased in INDIA
CSL offers a complete line of gas calibration standards from a single source which allows its customers to save time and money by consolidating vendors and centralizing responsibility. CSL offers certified gas standards which provides the ultimate in accuracy and traceability for the most demanding analytical ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra's CalTrak 500 is an accurate primary standard gas flow calibrator for all inert ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Bring the world’s most accurate flow standard to your lab with the CalTrak 800. The 800 is used for calibration and verification of: Mass flow meters, Controllers, Variable area flow ...
-
Manufactured by FTI Flow Technology Inc.based in USA
The Autobell®, a primary standard gas calibration system, is used to accurately measure a displaced volume of gas at a constant pressure. Interface electronics are provided to measure displaced volume and the time over which the volume is displaced so that a precise flow rate can be determined. To calibrate ...
-
Manufactured by Fluke Calibrationbased in USA
Laminar flow elements for flow from 1 sccm to 100 slm; molbloc-Ls are laminar flow elements for use with molbox mass flow terminals. The molbloc flow path is the longitudinal, annular gap between a piston and a close fitting cylindrical bore in the molbloc body. Different molbloc ranges are obtained by varying the size of the gap. For high flow ranges (size 1E4 and above), a larger molbloc body ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4020 can mix up to seven (7) component gases simultaneously to generate precise gas calibration standards and gaseous atmospheres in a broad dynamic range. The dilution capabilities of the Series 4020 allows dilution ratios from 1:1 to 10,000:1 (with larger ranges possible, depending on the configuration of the ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of gas blends is assured with the Series 4020UHP Ultra-High Purity Gas Mixing/Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The dynamic calibrator is based on the microprocessor technology and the multi-channel gas calibration equipment developed specifically for precise gas analyzer. Adopting the high precision quality flow controller and standard gas, the calibration standard ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Series 4000 UHP Gas Mixing System combines the accuracy and repeatability of the Series 4000 with a welded, Ultra-High-Purity (UHP) construction. All units are optimized for your target gases. With all metal seals, units are commonly used for both research & development and/or production applications, including ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements. The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 4000 consists of a single chassis now supporting up to eight mass flow controllers. The mass flow controllers are factory calibrated using a primary flow standard traceable to the United States National Institute of Standards and Technology (NIST). Each flow controller utilizes an 11 point calibration table with linear ...
-
Manufactured by MESA Specialty Gases & Equipmentbased in USA
MESA Specialty Gases & Equipment offers a complete line of gas calibration standards from a single source allowing you to save time and money by consolidating vendors and centralizing responsibility. Select the analytical tolerance you need to best suite your specialty gas requirements. MESA Specialty Gases offers two types ...
-
Manufactured by MESA Specialty Gases & Equipmentbased in USA
MESA Specialty Gas & Equipment manufacture a broad range of high quality custom calibration gas standards for use in laboratory, R&D, University and industrial analysis applications. Custom calibration gas standards are manufactured using state of the art gravimetric and ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
A separate module is available that will allow you to purge aqueous samples onto an adsorbent tube at ambient temperatures. This module can also be used to generate a dynamic humidified stream of the carrier gas for spiking calibration standards. The purge and trap module includes purge and trap glassware, and a separate flow ...
-
Manufactured by Sigma-Aldrichbased in USA
A separate module is available that will allow you to purge aqueous samples onto an adsorbent tube at ambient temperatures. This module can also be used to generate a dynamic humidified stream of the carrier gas for spiking calibration standards. The purge and trap module includes purge and trap glassware, and a separate flow ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The GENie O3 is the latest in our line of portable calibration gas standards. Small, lightweight and operating on four AA batteries, the GENie O3 can be utilized in its fanny pack by a technician climbing around equipment to calibrate the most difficult to reach ozone sensors. Plugged in to mains power, the instrument can ...
-
Manufactured by KIN-TEK Analytical, Inc.based in USA
KIN-TEK Industrial Gas Standard Generators are used in industrial environments. These instrument systems use Trace Source permeation tubes to deliver calibration gas standards directly to your process GC, GC-MS, or any type of gas analyzer. KIN-TEK Gas Standard ...
-
Distributed by Spantech Products LTDbased in UNITED KINGDOM
Spantech is proud to feature the CAL-101, the low-cost electrochemical gas instrument. Field replaceable gas sources provide a calibration standard for accurately testing Chlorine, Hydrogen Sulfide, Hydrogen and Hydrogen Cyanide sensors. This calibration method is approved under the ISO DIS 6145-11 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you