Showing results for: Gas Divider (Calibration Systems) Equipment Available In Palestinian Territories
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet portable calibrator is one of the most important tools in generating new applications for the Gasmet FTIR gas analyzer. The calibrator incorporates a syringe pump, a manual needle valve, a mass flow meter, and a stainless-steel injection chamber. The syringe pump injects precise amounts of liquid or gas into a hot nitrogen gas flow, ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, hydrocarbons and more. Custom options can be selected for calibration of ammonia, HCl and a variety of other gases of interest. The S6100 is a great option for dilutions from ppm or lower level cylinders. The S6100 can now be ordered or retrofit to run on a 24V power source so you can ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mix your gases now. The intuitive touch display guides you through the settings. Place up to 10 different recipes and call them with a "touch". You do not need any previous knowledge or external PC software. Incorrect operation? Impossible! Another plus: as a mobile variant, the EasyCal is no bigger than a make-up ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MC-3000 generates a continuous stream of a mercury vapor loaded gas in order to check or calibrate mercury analyzers. An exactly adjustable carrier gas stream (normally air or nitrogen) is loaded with mercury in a first step. In a second step the gas is supersaturated by cooling. Subsequently the excess mercury is condensed in a special ...
-
PremiumManufactured by Environics, Inc.based in USA
chamber, a reaction chamber for gas phase titration and control electronics. Like the Series 6100, the Series 6103 may also be remotely operated using contact closures or the RS-232 serial data interface (RS-232-Ethernet adapter ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases. The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. It meets all U.S. environmental protection agency ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GT Calibration Station provides a safe and convenient method of calibrating the GT Series instrument. The calibration station for mixed gases should be mounted on a vertical surface for best results. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine ...
-
Manufactured by Rockwin Flowmeters India Pvt Ltdbased in INDIA
The Gas calibration Rig is based on Transfer Standard and uses air as calibration fluid. The master meters and the test meter runs are equipped with necessary flow conditioning devices in accordance to AGA 7. Calibration is carried out by comparing the volume registered by the master meter, after pressure and temperature corrections to bring ...
-
Manufactured by Accutron Instruments Inc.based in CANADA
Gas Detector Calibration in the Palm of Your Hand. The MiniCal is a revolution in calibration gas technology. We’ve addressed reactive component fade, shipping and transportation hassles, and disposal (just send it back to us to get your deposit back!) by designing the best calibration gas cylinder of all time. The MiniCal saves you ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
The Model 146i mass flow controller ozone generator, permeation tube oven, power supply and solenoid valves are integrated into a single microprocessor controlled unit. This permits easy to use menu driven software and a consistent set of operation screens for all calibration procedures. Additionally, the microprocessor can make many of the necessary calculations, thereby freeing the operator ...
-
Manufactured by Teledyne APIbased in USA
The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded travel case which includes an ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6110 Computerized Ozone Generation - Calibration System produces accurate, stable ozone for calibration of ambient air analyzers or for creating specific ozone environments for research. The Environics® Series 6110 is an ozone generation system that can be designed with or without separate zero air (reference) control. With this feature, the S6110 is ideally ...
-
Manufactured by FTI Flow Technology Inc.based in USA
The Autobell®, a primary standard gas calibration system, is used to accurately measure a displaced volume of gas at a constant pressure. Interface electronics are provided to measure displaced volume and the time over which the volume is displaced so that a precise flow rate can be determined. To calibrate a gas flow meter ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you