Calibration Systems services for Monitoring and Testing

Our preventive maintenance (PM) services give you right-from-the-source expertise. Our factory-trained technicians are skilled in maintaining and upgrading your equipment. Whether Dürr Megtec supplied your equipment or if it was supplied by other manufacturers, a PM with Dürr Megtec can help keep your equipment operating at maximum ...

By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA). from Dürr Megtec Services and Support Service line

By updating your Merck photometers, you can use the same instrument to conduct the new tests without having to program it yourself. This gives you the assurance that your results will be correct, as it’s our responsibility to calibrate the tests for the instrument. Benefit from always having an up-to-date instrument!

By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

In order to achieve quantitative measurement output (mg/m3) from PCME sensors and to ensure optimum performance from PCME's Particulate Monitoring Systems, it is necessary that the unit is calibrated against the results from the standard reference method (SRM), via isokinetic sampling.

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - Technical Services Service line

We can offer you specific training packages. The highest level of reliability for all TOMRA sorting technology can be achieved via  trained customer staff and regular technical inspection by our service engineers. In particular, this partnership ensures that your equipment is always adjusted to the highest level of performance.

By TOMRA Sorting GmbH based in Asker, NORWAY. from Service & Support Service line

All LumaSense products come with a manufacturer's warranty when purchased, which covers calibration, replacement parts, and repairs. The duration of this initial warranty varies by product and is at a minimum of one year.

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Factory Service Service line

ENVEA UK has extensive experience assisting operators to meet their compliance monitoring requirements, where understanding that calibration is not simply an isokinetic test is the key to success. Two categories of service are offered for the calibration of Particulate Measurement Systems: Annual Calibration Assist (which does not include ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

Dekati provides maintenance and calibration services for all Dekati Instruments. Maintenance Services verify operation of your instrument locally whereas complete re-calibration services are performed at Dekati factory in Finland. Details of different instrument services can be found below. If you cannot find your instrument in the list, please ...

By Dekati Ltd. based in Kangasala, FINLAND.

LNI Swissgas SA has an ISO 17025 accreditated Laboratory for flow measurements and has a large number of analyzers to provide a calibration certificate as well as analytical checks.

By LNI Swissgas based in Versoix, SWITZERLAND.

Configuration Services are designed for operators requiring reliable and representative trending data from their dust monitors, without the need for calibrated, quantitative measurement. PCME's Service Engineers have extensive experience configuring dust monitors to maximise filter performance and process benefits. Customers using Dust Gross ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line

Brentwood combines two modeling methods to accommodate site-specific applications for AccuFAS system design. Our kinetic design models are based on extensive pilot studies and full-scale installations, and accurately predict treatment performance. Our commercial BioWin models are constructed based on IWA ASM models and incorporate a sophisticated ...

By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).

Your brand-new pyrometers are precisely calibrated at the factory, which is documented with a corresponding certificate. Like every high-precision measuring instrument, pyrometers should be checked on a regular basis to ensure accurate long term measurement results.

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from On-Site Calibration and Repair Service line

ENVEA UK offer industry leading expertise to customers and partners through a comprehensive range of technical services, training packages and a 'knowledge transfer' approach. The aim is to advise and support customers and partners in meeting the specific particulate monitoring challenges they face, from initial consultation and product selection ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - Technical Services Service line

MOCON, Inc. - Baseline is pleased to present our service and support plans. Outlined below are plans that are designed to fit your needs for keeping your system operating at top performance. Our goal is to become your partner in managing your systems needs though the lifecycle of the product. We have designed these plans to meet your company's ...

By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

We know your LumaSense equipment plays a critical role on your process and research.  Precision is imperative so we’ve established a fully equipped, expertly staffed laboratory for performing calibrations that meet national standards on all makes (MIKRON, IMPAC, E2T, LUXTRON, SmartDGA®, INNOVA, and ANDROS) of LumaSense infrared ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Factory Service Service line

Our service teams have the flexibility to meet all maintenance and calibration demands. With well established and experienced instrumentation engineers, we are committed to providing total service solutions. From scheduled site visits for inspection and service through to fully inclusive maintenance contracts.

By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Users based in countries served by a Delta-T Devices distributor should contact them in the first instance. Other users should contact Delta-T Devices directly. Spare parts for our own instruments can be supplied and can normally be despatched within a few working days of receiving an order. Spare parts and accessories for products not ...

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM.

Servicing your gas analyser minimises its downtime and maximises its lifetime.

By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

Proper operation of Dekati Gravimetric Impactors can be ensured by following the maintenance and service instructions given in the user manuals of the instruments. If further verification of the instrument operation is needed, we can provide maintenance and calibration services for the Dekati® Impactors. All Dekati® Impactor calibration ...

By Dekati Ltd. based in Kangasala, FINLAND.

Our service technicians are well trained to calibrate your instruments to the highest standards and our software-controlled approach automates critical steps that drive consistency in each calibration. This ensures the same calibration result and performance, consistent with the factory calibration, regardless of where the calibration is ...

By Particle Measuring Systems based in Boulder, COLORADO (USA).

A full range of Setup Packages are offered to customers, bringing extensive experience from a wide variety of installation and commissioning projects and a thorough knowledge of the issues which can arise. Whether your ENVEA UK particulate monitoring system is to ensure legislative compliance or provide filter performance monitoring and process ...

By ENVEA based in Poissy, FRANCE. from PCME Ltd - part of the Environnement S.A Group - ENVEA UK Support Packages Service line