Canister Monitoring Equipment For Monitoring And Testing Available In Alabama
-
Manufactured by Exposmeter ABbased in SWEDEN
EWL15-Tox with canister samplers characteristics are the same as EWL15-Tox with exception that the membrane is delivered mounted on spider and placed in the aliumina canister. Aliumina canister for EWL15 with canister series samplers. Dimensions: 9cm x 3cm x 3 ...
-
Manufactured by ATECbased in USA
-
Manufactured by Entech Instruments, Inc.based in USA
The TM1200 is Entech’s next generation canister sampling timer that automatically starts and stops the sampling process at specic times. Now you can easily start a 24 hour sample at midnight and stop it at midnight the following night without having to be present. Typically operated with our CS1200Ex canister sampler to time integrate the sampling event for a 24 hour sample, the TM1200 creates an ...
-
Manufactured by Environmental Technology, Inc.based in USA
The EDH–4 dehydrator addresses the need for a low cost, non-regenerating air dehydrator for pressurizing small volume waveguides and coax. It is especially suited for C, X, Ku, and Ka band applications. The output pressure is 0.5 psig (34.5 mbar) with a maximum flow rate of 6.0 scfh (2.8 lpm). It is intended for use in systems smaller than 18 cubic feet (510 liters). The EDH–4 ...
-
Manufactured by Exposmeter ABbased in SWEDEN
EWL15 with canister samplers characteristics are the same as EWL15 with exception that the membrane is delivered mounted on spider and placed in the aliumina canister. Aliumina canister for EWL15 with canister series samplers. Dimensions: 9cm x 3cm x 3 ...
-
Manufactured by Multisorbbased in USA
Multiform CSF desiccant canisters utilize a unique compressed, solid-form design with pharmaceutical-grade coating. This careful design offers cost savings over traditional, larger loose-fill ...
-
Manufactured by Xonteck Incbased in USA
The Xonteck Model 911 Canister Sampler is a full featured portable sampler that is designed for a wide variety of field sampling applications, including the characterization of emissions at landfills, surface impoundment, land spreading, drum burial or waste piles. The method is based on collection of whole air samples into 'Summa' electropolished canisters as outlined in USEPA TO-14A/T0-15 ...
-
Manufactured by Pharma Desiccant, a Division of Sorbead Indiabased in INDIA
Pharmaceutical Desiccants offer a complete line of food grade HDPE small containers called “Desiccant Canister”, manufactured by ‘SPLACK’, for sustainable packaging of pharmaceutical products. These silica gel desiccant canister ensure the product’s integrity and offers 100% quality control vision by also checking the laser-oriented ...
-
Manufactured by High Sierra Electronics, Inc. - an AEM brandbased in USA
The Model 5000-00 Desiccant Canister is a small, perforated canister packed with a desiccant having color indicators for moisture ontent. The case is lightweight yet strong enough to withstand years of use. The desiccant content has a reversible action. Once the anister has absorbed all the moisture it can hold, it can be regenerated easily by a simple heat treatment. Upon cooling, it will be ...
-
Manufactured by Xonteck Incbased in USA
The Xonteck Model 910 Canister Sampler is a new features manual sampler that is designed to collect volatile organic compounds in ambient air. The method is based on collection of whole air samples into 'Summa' electropolished canisters as outlined in USEPA TO-14A/TO-15 ...
-
Manufactured by Interteck Packaging, Inc.based in USA
Our gun safe dehumidifier / rechargeable desiccant canister is the perfect moisture control solution for your medium sized gun safes and cabinets. These large shot gun shell dehumidifiers measure 6 1/2″ tall x 3 3/4″ in diameter and will dry and protect up 60 cubic feet of ...
-
Manufactured by Entech Instruments, Inc.based in USA
The 1900 Multi-Channel Canister Sampler is Entech’s next generation solution for collecting air samples in Silonite™ coated canisters for detailed analysis in the laboratory by GC/MS or GC/FID/MS. A dramatically improved flow path now creates far less potential for carryover relative to other commercially available samplers. Mass Flow Controllers and solenoid valves have been ...
-
Manufactured by Exposmeter ABbased in SWEDEN
EWL15-PRC with canister samplers characteristics are the same as EWL15-PRC with exception that the membrane is delivered mounted on spider and placed in the aliumina canister. Aliumina canister for EWL15 with canister series samplers. Dimensions: 9cm x 3cm x 3 ...
-
Manufactured by Xonteck Incbased in USA
The Xonteck Model 901 Canister Sampler is a computer-controlled, programmable sampler that is designed to collect volatile organic compounds in ambient air. The method is based on collection of whole air samples into 'Summa' electropolished canisters as outlined in USEPA TO-14A/TO-15 ...
-
Manufactured by ATECbased in USA
The Model 8001 Canister Sampler is a self-contained air sampling instrument that has been designed to collect air samples into canisters for specified periods. The flow rates into the canisters are regulated using electronic mass flow controllers. A single board internal computer with a color touch screen display provides flexible scheduling, error checking, and data logging capabilities. The ...
-
Manufactured by ATECbased in USA
The ATEC Models 2200-1, 2200-12, and 2200-22 Toxic Air Samplers are self-contained air sampling instruments that have been specifically designed to simultaneously collect air samples into canisters. The flow rates into the canisters are regulated using electronic mass flow controllers. A single board internal computer with a color touch screen display provides flexible scheduling, error checking, ...
-
Manufactured by Entech Instruments, Inc.based in USA
Several carrying cases are available for MiniCan™ and Bottle-Vac™ samplers. Options are based on the number and size of canisters needing to be shipped. Refer to the chart below for canister and valve compatibility. Custom kits can be made using PN 29-20810 which has pre-cut foam inserts to accommodate canisters, samplers, and test ...
-
Manufactured by Xonteck Incbased in USA
The Xonteck Model 912 Multi-Canister Sampling Adapter is designed to route air samples to or from up to 16 canisters. The 912 is controlled by a Xonteck Model 901 to step its internal rotary valve from canister to canister at a user-selected rate and order. ...
-
Manufactured by Sensor Driven Ltdbased in UNITED KINGDOM
The longevity of sensors is critical when monitoring in areas with problematic access, and especially those in harsh environments where battery replacement is not possible. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you