Carbon Dioxide (CO2) Monitoring Equipment For Monitoring And Testing Available In Cape Verde
-
PremiumManufactured by Testo, Inc.based in USA
The compact CO2 measuring instrument testo 535 is ideally suited for simple, fast and precise determination of carbon dioxide content to ensure indoor air quality and thus health and performance. The connection to the testo Smart App enables configuration, display (also as second screen) and storage as well as documentation of the measured values directly in the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA-TOTAL is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. It is also able to remove other pollutant like Humidity, CO2, CO, NOx, SO2 and Hydrocarbons. Very small in size, the ZA-TOTAL can filter up to 30 L/min of compressed Air and can withstand a pressure up to 8 bar (115 PSI). The reduction of hydrocarbons, including methane, and ...
-
PremiumManufactured by EVERS GmbH & Co. KGbased in GERMANY
Manganese dioxide in accordance with EN 13752. Based on naturally occurring manganese dioxide, EVERZIT® Mn is used primarily for catalytic manganese removal in drinking water and mineral water treatment. The high active surface area of EVERZIT® Mn facilitates oxidation of iron and manganese in water with high oxygen content and promotes formation of hydrated oxide floccules which are ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CozIR-Blink Sensor is an ultra low power CO2 sensor that enables customers to manage the power consumption based on their needs and overall application or ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-504 is a Multi-Gas Detector designed to measure carbon dioxide (CO2) and carbon monoxide (CO) concentrations in a variety of applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q3 is a portable CO2 analyzer, used for incubator measurement and other scientific applications. It weighs only 2 lbs, and comes with rechargeable batteries, sample probe, charger, and accessories to begin sampling. There is also a TSA approved hard carry case for easy portability and protection ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
Flow Directors are designed to transform SenseAir K30 and K33 model sensors from diffusion to sample draw sensors. The tube cap kit attaches directly to the top of the sensor with self-tapping ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 63 MOx is the next generation in measuring NO/NOx, O2 and CO2. Unique in speed and precision, the nCLD 63 MOx is modular designed and allows the continuous measurement of concentrations in the range of parts per million. The measuring principles comply with international emissions monitoring regulations and its new and intuitive user interface “GUI“ individually displays and ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CM-7004: CO2 Multi Sensor Horn Strobe Add-On is designed to provide instant audible/visual strobe alarm that can be used in interior placements with the CO2 Multi Sensor Tablet, Sensors, and Reset Units. This CO2 Multi Sensor Horn Strobe works only with our CO2 Multi Sensor Tablet. ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 906 CO2 Analyzer is designed for continuous or spot measurement and analysis of carbon dioxide levels. Analysis ranges of 0-5,000ppm, 0-10,000ppm, 0-25,000ppm, 0-20%, or 0-100% vol/vol. Simply introduce your sample gas flow into the inlet of the Model 906 CO2 analyzer, and see results on the LCD within 15-20 seconds. The inlet accepts a flow rate of 5cc/min to 1000 cc/min. If ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CO2Meter Tube Cap Adapter converts gas sensors from diffusion applications to sampling. These custom tube caps include a ribbon cable to measure barometric pressure, temperature, and % relative humidity from the gas ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The SAN-10 Personal 5% CO2 Safety Monitor and Data Logger is designed for employees who work in enclosed areas where carbon dioxide buildup may cause personal harm. This device features exclusive data logging capabilities and the data log files can be downloaded as csv./xls. files then displayed via our GasLab ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3751-2 basic ventilation system (dual gas) and Innova 3751-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The SV-0129 Safety Shut Off Valve automatically shuts off the gas supply in the room or at the tank for several of our devices in case of a high-gas ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CM-650 Welding Gas Analyzer is designed for real-time analysis of 2-gas mixtures or 2 different gas concentrations for welding shield ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Specializing in hydrogen and noble gases: For continuous measurement of hydrogen and noble gases, the specific thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components are present, the concentrations of all other components must be measured separately using other measuring ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q2 is a Portable Oxygen and CO2 analyzer, used for research or package testing. The Q2 is a portable headspace analyzer for measurement of O2 and CO2 levels in gas flushed MAP packages (such as coffee or meat products). Alternately, the Q2 can be used for portable O2 and CO2 measurements for research applications (such as cell culture incubators). It weighs only 2 lbs, and comes with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you