Carbon Dioxide (CO2) Monitoring Equipment For Monitoring And Testing Available In St. Kitts & Nevis
-
ShowcaseManufactured by Access Sensor Technologies LLCbased in USA
Our flagship wearable sampler. Collect filter-based air samples on to 37 mm filter media along with extensive sensor data to inform you on motion, compliance, environmental factors, particulate matter, carbon dioxide and tVOC and NOx. Access Sensor Technologies’ UPAS is a compact, filter sampler built around ultrasonic pumping technology. The UPAS is smaller, lighter, quieter, ...
-
ShowcaseManufactured by Hermann Sewerin GmbHbased in GERMANY
Multiple gas measuring device with infrared sensors - optimised for biogas and landfill gas. The Multitec 540 is a gas measuring device for analysing gas mixtures that are formed in biological processes. It can measure the concentration of up to five gases simultaneously. The device is fitted with infrared sensors for measuring methane and carbon dioxide. It can also be fitted with ...
-
ShowcaseManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. The CTX 300 transmits data in ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA TOTAL C HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA TOTAL C HP is available with a smart low noise built-in pistons compressor, 100% oil-free. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6552 gas analyzer is available with two gas channels and can be applied to any type or combination of refrigeration systems that employ FreonsTM and carbon dioxide. Ability to measure up to five gases. Rapid warm-up. Highly accurate calibration. Simple and fast system integration. RS232 or USB ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
Gas Endeavour® is our premier automatic instrument for continuous monitoring of fermentation gas (i.e., hydrogen, methane, carbon dioxide) released in in-vitro ruminant digestive models and in-vitro monogastric hindgut digestive model for monogastric animals and human. In comparison with the other in-vitro methods measuring the transformation of fermentable substrate, the Gas Endeavour® ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3750-2 basic ventilation system (dual gas) and Innova 3750-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
This CO2 Multi Sensor Exterior Horn Strobe is designed to provide an audible/visual strobe alarm that can be used for all exterior placements. This CO2 Multi Sensor Exterior Horn Strobe works only with our CO2 Multi Sensor Tablet. ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q2 is a Portable Oxygen and CO2 analyzer, used for research or package testing. The Q2 is a portable headspace analyzer for measurement of O2 and CO2 levels in gas flushed MAP packages (such as coffee or meat products). Alternately, the Q2 can be used for portable O2 and CO2 measurements for research applications (such as cell culture incubators). It weighs only 2 lbs, and comes with ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-505 is a Multi-Gas Detector designed to measure carbon dioxide (CO2), carbon monoxide (CO) Oxygen (O2), relative humidity and temperature in a variety of applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
Flow Directors are designed to transform SenseAir K30 and K33 model sensors from diffusion to sample draw sensors. The tube cap kit attaches directly to the top of the sensor with self-tapping ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The MPPiS was specially developed for buoyancy measurements of gravity ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
With the CM-1650 Portable CO2 Welding Gas Analyzer, CO2Meter is providing customers with advanced analysis of active welding gas blends that contain 0-100% carbon dioxide. This device verifies the most common gas mixtures in the industry and will set the main target for verification. Plus, this device is the only device that meets accuracy standards set by the American Welding Society (AWS) at a ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The SV-0129 Safety Shut Off Valve automatically shuts off the gas supply in the room or at the tank for several of our devices in case of a high-gas ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-504 is a Multi-Gas Detector designed to measure carbon dioxide (CO2) and carbon monoxide (CO) concentrations in a variety of applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecPen Oxygen (O2) and Carbon Dioxide (CO2) Weld Purge Analyzer is designed to provide accurate measurements down to 0% oxygen and up to 100% carbon dioxide when back purging with argon and CO2 gas mix during welding. ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19" inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our application flexibility allows the chromaCO start up ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The ExplorIR®-W (formerly known as CozIR Wide Range) is a low power, high performance CO2 sensor that can measure up to 60% CO2 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you