Cascade Impactors Equipment For Monitoring And Testing Available In Liechtenstein
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
70 mm filter stage holder with 2.5 μm ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
Manufactured by A. P. Buck Inc.based in USA
The Buck-BioAire B6 Single Stage Microbial Sampler makes the collection and assessment of aerosol samples fast and easy. A Petri dish containing appropriate agar medium is placed in the impactor and a sample of air is drawn. The Petri dish is removed, recovered, incubated, and counted by an accepted ...
-
Manufactured by SKCbased in USA
The SKC BioStage® viable cascade impactor meets NIOSH requirements and ACGIH recommendations for sampling indoor and outdoor mold and fungi. The BioStage comprises an inlet cone, precision-drilled 400-hole impactor stage, and a base that holds a standard-size agar plate. A high flow pump, such as the QuickTake 30, pulls microorganisms in air through the holes (jets) where they are collected ...
-
Manufactured by Tisch Environmental Inc. - Tisch Internationalbased in USA
Our Personal Cascade Impactor is a precision cascade impactor worn by personnel to provide complete and accurate aerodynamic particle size distributions of the particulate in their environment. A personal mounting bracket is provided to attach to the subject’s lapel or pocket. It is compact, light-weight (7 oz. Max.) and are available with 8, 6, or 4 impactor stages all followed by a ...
-
Manufactured by TCR-Tecorabased in ITALY
MDI Metered Dose Inhalers; DPI Dry Powder Inhaler. Aerodynamic particle sizing. The design concept of the Andersen Cascade Impactor evolves from the following information: The human respiratory system tract is an aerodynamic classifying system for airborne particles. A sampling device can be used as a substitute for the respiratory tract as a collector of airborne particles, and as such, it shall ...
-
Manufactured by AMS Analiticabased in ITALY
The new high volume Air Flow PM10-HVS sampler line equipment perfectly complies with UNI-EN 12341 norm requirements for the respective sampling of PM-10 particles. It is equipped with an electronic flow control with a Venturi tube system in compliant with ISO 5167 requirements with differential pressure devices and for the detection of pressure itself on 4 points per sector, offering the user ...
-
Manufactured by TCR-Tecorabased in ITALY
The design concept of the Multistage Viable Impactor evolves from the following information: The human respiratory system tract is an aerodynamic classifying system for airborne particles. A sampling device can be used as a substitute for the respiratory tract as a collector of viable airborne particles, and as such, it should reproduce to a reasonable degree the lung penetration by these ...
-
Manufactured by California Measurements, Inc.based in USA
10-stage QCM cascade impactor; covers particle size range of 10 to 0.14 microns; 0.24 lpm flow rate; complete with pump and control unit; provides printout of size distribution and mass concentration of ten size fractions automatically; with 12.6 lpm higher flow sampling inlet and isokinetic flow divider on impactor; higher flows of 30, 60, or 90 lpm are available. Configured especially for ...
-
Manufactured by TSI Incorporatedbased in USA
The Real-Time, Quartz Crystal Microbalance (QCM) MOUDI™ impactor is a precision research-grade impactor with real-time mass detection based on QCM sensors. The impactor has a 2.5-µm inlet and six QCM stages with sharp collection efficiency curves and calibrated cutpoints of 960, 510, 305, 156, 74 and 45 nm at 10 L/min inlet flow rate. ...
-
Manufactured by California Measurements, Inc.based in USA
10-stage QCM cascade impactor; covers particle size range of 10 to 0.05 microns; 2 lpm flow rate; complete with pump and control unit; provides printout of particle size distribution and mass concentration of ten size fractions automatically. Ideal for medium and lower concentration measurements down to a few ...
-
Manufactured by Mesa Laboratories, Inc.based in USA
The BGI tetraCal® is a simple-to-use standard for volumetric airflow, barometric pressure, and ambient temperature. The tetraCal is a venturi based system with built-in compensation for changes in ambient temperature and pressure. All tetraCal systems are built and tested at Mesa which is a NIST traceable Calibration Laboratory. Calibration of particulate samplers and industrial hygiene , ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
ICTUS is a proven, dedicated system for the complete automation of Andersen Impactors capable of testing up to 30 inhalers in 24 ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The 8-stage Andersen Cascade Impactor (ACI) is the most frequently used instrument for the testing of inhaler products within the Pharmaceutical Sector. Westech ACIs are specifically designed to meet the highest criteria laid down in the ...
-
Manufactured by In-Tox Products, LLCbased in USA
In-Tox Products' Impactors are precision engineered and their careful design provides a number of advantages to the user. The material collected on each stage contains particles having sizes ranging from the cutoff size of the previous stage to the cutoff of the collecting size. Therefore, the analysis of the impactor data may be done without complicated computer programs. It also means that the ...
-
Manufactured by A. P. Buck Inc.based in USA
The BUCK LinEair 40 Sample Pump is a 5 - 35 LPM linear piston air sampling pump with long life motor providing impressive power, compact size and ultra quiet operation and low current drain for a wide range of sampling applications. With the BUCK LinEair 40, you can use filters, PUF samplers, sorbent tubes, charcoal cartridges, cascade impactors, bioaerosol spore trap cassettes and many other ...
-
Manufactured by A. P. Buck Inc.based in USA
The Buck LinEair 40 Sample Pump is a 5-35 LPM linear piston air sampling pump with long life motor providing impressive power, compact size, and ultra-quiet operation and low current drain for a wide range of sampling applications. With the LinEair 40 , you can use filters, PUF samplers, sorbent tubes, charcoal cartridges, cascade impactors, bioaerosol spore trap cassettes and many other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you