Cascade Impactors Equipment For Monitoring And Testing In Asia & Middle East
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
70 mm filter stage holder with 2.5 μm ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon high volume rotary vane pumps are an economical alternative to the Gast brand rotary vane pumps. The workhorses are heavy duty with a 1/10 hp motor that can be used for most all sampling applications. It can be used with PCM, TEM, Air-O-Cell and all viable impactors (e.g. Andersen style ...
-
Manufactured by Environmental Solutionsbased in INDIA
These cascade impactors are designed for sampling and collecting size-fractionated aerosol particle samples for gravimetric and or chemical analyses. That preferred by aerosol researchers worldwide for environmental and laboratory ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon high volume rotary vane pumps are an economical alternative to the Gast brand rotary vane pumps. The workhorses are heavy duty with a 1/10 hp motor that can be used for most all sampling applications. It can be used with PCM, TEM, Air-O-Cell and all viable impactors (e.g. Andersen style ...
-
Manufactured by SKC Asia HSE Sampling Technologies Pte Ltdbased in SINGAPORE
The SKC BioStage viable cascade impactor meets NIOSH requirements and ACGIH recommendations for sampling indoor and outdoor mold and bacteria. The BioStage comprises an inlet cone, precision-drilled 400-hole impactor stage, and a base that holds a standard-size agar plate. A high flow pump, such as the QuickTake 30, pulls microorganisms in air through the holes (jets) where they are collected on ...
-
Manufactured by TSI Incorporatedbased in USA
The Impactor Inlet is an accessory for the Aerodynamic Particle Sizer® (APS™) spectrometer. It combines a single-stage impactor with a filter to take a size-segregated sample. It then directs a small, representative sample of the initial test aerosol (diluted at 80 to 1) into the APS spectrometer for size-distribution measurement. The inlet aerosol passes through a single-stage impactor ...
-
Manufactured by Vaibhav Equipment Servicebased in INDIA
SPECIAL FEATURES: Design and Developed as per US EPA published standard designs. Meets the requirement of Pollution Control Board for Fine Dust Sampling. Accurate Particulate Sample Collection of PM 2.5 / PM10. User friendly & having low operating cost. Compact, Portable, Easy to Operate & Handle. Arrangement for Parallel Gaseous Sample Collection. Filter holders fitting in the sampler ...
-
Manufactured by TSI Incorporatedbased in USA
Models 128, 129, 130 and 131 are High Flow Impactors (HFI) ideal for sampling particles at low concentrations (pristine environments), for collecting more mass per stage as compared with conventional MOUDI™ impactors, or for obtaining samples in shorter sampling intervals. HFI impactors are available with 3, 4, 5 or 6 stages in the 0.25 to 10 µm aerodynamic size range. Particle ...
-
Manufactured by Tisch Environmental Incbased in USA
Eight Stage Ambient Sampler System Includes: 8 Aluminum Orifice Stages, 8 Stainless Steel Collection Plates, Back up 81mm Filter Holder. 11 Silicone O-Ring Gaskets, Vacuum Pump Assembly and Carrying Case ...
-
Manufactured by Tisch Environmental Incbased in USA
The series TE-230 provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with compactness, ease-of-use, and the lowest internal ...
-
Manufactured by Tisch Environmental Incbased in USA
x Stage Ambient Viable Sampler. System includes Six Aluminum Orifice Stages, Silicone O-ring Gaskets, Vacuum Pump Assembly and Carrying Case complete Single stage viable impactor operating at 28.3 LPM (Same as two ...
-
Distributed by Petro-Instruments Corp, Ltd.based in THAILAND
The PM-10 High Volume Air Sampler is an EPA Designated reference method (RFPS-1287-063) and exceeds the required EPA performance specifications for the measurement of PM10 in Ambient Air. PM10 Size selective high volume air sampling systems are available with. Mass Flow Control (MFC) or Volumetric Flow Control (VFC). Brush or Brush-less motor type. Mechanical or Digital Timer. Flow chart ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI-II and NanoMOUDI-II impactors are second generation Micro-Orifice, Uniform-Deposit Impactors from MSP. These impactors are noted for their superior aerodynamic design, sharp cut-size, and low particle loss characteristics. Up to 6000 precision micro-orifice nozzles are used to reduce pressure drop, jet velocity, particle bounce, and ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI impactors are classic, precise cascade impactors with sharp cut-size, low internal-loss characteristics, and high accuracy. These cascade impactors provide sharp cut-sizes, low internal losses, and high accuracy in a non-rotating configuration with a 30 L/min smapling flow rate. The MOUDI impactors, 100NR, 100S4, and 110NR, are used for collecting size-fractionated particle samples in the ...
-
Manufactured by TSI Incorporatedbased in USA
The Real-Time, Quartz Crystal Microbalance (QCM) MOUDI™ impactor is a precision research-grade impactor with real-time mass detection based on QCM sensors. The impactor has a 2.5-µm inlet and six QCM stages with sharp collection efficiency curves and calibrated cutpoints of 960, 510, 305, 156, 74 and 45 nm at 10 L/min inlet flow rate. ...
-
Manufactured by Mesa Laboratories, Inc.based in USA
The BGI tetraCal® is a simple-to-use standard for volumetric airflow, barometric pressure, and ambient temperature. The tetraCal is a venturi based system with built-in compensation for changes in ambient temperature and pressure. All tetraCal systems are built and tested at Mesa which is a NIST traceable Calibration Laboratory. Calibration of particulate samplers and industrial hygiene , ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you