Chemically Inert Materials Equipment For Monitoring And Testing Near Afghanistan
-
PremiumManufactured by BUCHIbased in SWITZERLAND
You routinely purify your samples on an open glass column and have to cope with a limited resolution and a long separation time. As a first step towards automation, we offer two small systems: the “Easy Synthesis” and the “Easy Extract” systems allow you to control the flow rate and the eluent ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The pump modules C-601 and C-605 are the core components of the BUCHI Sepacore® Chromatography systems. Whatever the application in isocratic or gradient mode is, the modules provide a reproducible and pulse free flow ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
For simple level measurement applications in liquids. Micropilot FMR53 for simple level measurement applications in liquids. With its slim rod antenna, FMR53 free space radar is particularly suited for small process connections. The PTFE coating of the rod antenna and flange plating guarantee resistance also in aggressive media. The Micropilot FMR53 is used for continuous, non-contact level ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLEX 7200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. With its large choice of probe types and materials, this level transmitter is the high-end guided radar for level and interface measurement in the chemical or oil and gas industries. It is suitable for storage or process tanks up to 60 m / 196.85 ft, containing all kind of ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 408M Micro Double Valve Pump has a remarkably small and flexible design. It is a pneumatic pump which operates under the same principle as the standard DVP, but uses coaxial PFAS-free PTFE tubing with stainless steel valves and filter. Small enough to fit in 1/2" (13 mm) tubing and all channels of the Solinst CMT System, the Micro DVP is ideal for low flow sampling in narrow applications. A ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 404 Inertial Pump is ideal for dedication. The pump includes a simple footvalve and length of polyethylene tubing, which is very inexpensive. Sampling to depths of 30 m (100 ft) can be performed by hand. The Inertial Pump is suitable for purging, sampling and developing wells. It easily handles heavily laden, silty ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
CMT Multilevel System consists of 7 discrete zones. Zones are packed off using bentonite to eliminate vertical contamination between sand packed sampling ports. Depth discrete data obtained from CMT increases risk assessment accuracy, improves decision making, optimizes performance of site remediation, and provides vertical hydraulic head data for model calibration. Narrow 3-channel option as ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 401 Waterloo Multilevel System allows detailed groundwater monitoring from many zones in one borehole. The System is modular to allow ports to be located accurately at desired monitoring zones. The zones are permanently isolated by packers or seals and each port is individually connected to the surface. Ports can be fitted with dedicated Transducers, Bladder Pumps and/or Double Valve Pumps. ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Solinst Model 425 Discrete Interval Sampler (DIS) is a stainless steel sampler, with LDPE tubing mounted on the convenient Solinst reel. The reel has a pressure attachment for a high pressure hand pump, and a pressure/vent switch which is used to apply and release the pressure on the sampler. A sample release device is included with each standard Discrete Interval Sampler. Solinst also offers ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Model 615 ML Multilevel Drive-Point Piezometer system can provide several monitoring zones in one drive location. The 615 ML Ports have a dual barbed stem that allows the connection of either 3/8" OD or 1/4" OD tubing to create up to 3 or 6 monitoring zones, respectively. The 615 ML Multilevel System is installed using extensions and a Manual Slide Hammer, similar to standard 615 ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 615 Drive-Point Piezometers are cost-effective for initial site investigations, plume delineations, and as low-cost mini well points. They are excellent for groundwater or soil gas sampling, underground storage tank monitoring, and as sparge points. The stainless steel piezometer point has a 50 mesh screen and a 3/4" NPT riser pipe. An inner sampling tube can be used if higher quality samples ...
-
Manufactured by Eigenbrodt GmbH & Co. KGbased in GERMANY
A new kind of precipitation collector designed as a routine able bulk-collector to obtain samples for analysis of mercury traces. Funnel‑ and sample bottle heating enables year round operation. Cooling down to a temperature of 5 °C prevents the loss of volatile sample components. The borosilicate glass funnel helps prevent droplets adhering to the funnel and is pH neutral. irect ...
-
based in UNITED KINGDOM
ACTI-VOC is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling ...
-
based in UNITED KINGDOM
ACTI-VOC PLUS™ is a robust fast-flow pump kit for sampling volatile organic compounds (VOCs) onto sorbent tubes for analysis using thermal desorption (TD). With an extended flow range compared to the ACTI-VOC, ACTI-VOC PLUS is ideal for sampling semi-volatile organic compounds (SVOCs), where the flows required are in the region of 300–500 ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Rod probe, fully PE or PTFE insulated. Application area: For measurement in conductive and non-conductive liquids. A full/empty adjustment is necessary for setup. The VEGACAL 63 level sensor can be used universally for the measurement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven mechanical construction offers high functional ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Unheated Sample Line jumpers are used between the filter and the first impinger in “flexible” sampling arrangements. Jumpers are available in various lengths and configurations. Stainless steel overbraid 3/8″ ID PFA tubing is ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
The Synspec Cooled Sample Conditioning Unit (Cooled-SCU) is developed for the effective removal of high concentrations of humidity from your sample gas. Heart of the instrument is a cooled loop that removes the humid from the sample gas. All internal tubing of the Cooled-SCU is made of inert materials, making this Cooled-SCU in particular suitable for the analysis of sulphur containing components ...
-
Manufactured by Schmidt Haensch GmbH & Co.based in GERMANY
Let yourself be inspired by the possibilities of lab automation! The SAMPLIFY P autosampler is the newest product in the versatile portfolio of Schmidt + Haensch. It supports your daily workflow of liquid handling and is the perfect add-on for Schmidt + Haensch refractometers, density meters and photometers. It offers large felxibility, is easy to operate and ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet portable calibrator is one of the most important tools in generating new applications for the Gasmet FTIR gas analyzer. The calibrator incorporates a syringe pump, a manual needle valve, a mass flow meter, and a stainless-steel injection chamber. The syringe pump injects precise amounts of liquid or gas into a hot nitrogen gas flow, thus producing a continuous flow of a known concentration ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you