Chlorine Gas (CL2) Monitoring Equipment For Monitoring And Testing In Europe
-
Manufactured by Sterling Hydrotech Ltdbased in UNITED KINGDOM
Did you know your plant room could be subject to chlorine gas, a potentially fatal and extremely harmful gas? Are you and your staff protected from a chlorine gas incident? This is where the GMS plus gas detection system comes in. This flexible multi-function device warns the operating personnel if a defined concentration of gas is reached in the air, alerting them to evacuate to ...
-
Manufactured by Controlmatik ABW d.o.o.based in SLOVENIA
The MR 21 RC System of Vacuum Regulators is designed for dosing gas chlorine and with minor alterations also for other gases, working on the indirect vacuum ...
-
Manufactured by BELIMObased in SWITZERLAND
Factory calibrated; electro-chemical sensor; expected life 1-3 ...
-
Manufactured by Alphasense - AMETEKbased in UNITED KINGDOM
Exposure to the toxic gas Chlorine (Cl2) can lead to irritation of the nose, dryness in their throat and a cough in the short term. Exposure to higher volumes can cause far more series issues, from significant irritation, to bronchitis and death in some cases. With strong disinfectant properties and usage in a variety of manufacturing industries, Cl2 usage is increasing and continues to present a ...
-
Manufactured by Controlmatik ABW d.o.o.based in SLOVENIA
Chlorine gas leak detector provides information about the leakage and gives signal to shut off system control panel which immediately closes all the necessary valves to prevent further leakage. The system is very easy to install. Controlmatik ABW “Shutoff system” can be used from one up to eight units (cylinder or container valves). The system uses nitrogen as pneumatic source. There ...
-
based in USA
The Q2050 series of wall mount enclosures provide a weatherproof, NEMA4X fiberglass enclosure with clear door for nonhazardous area installations. Available with any combination of combustible or toxic panel-mounted R8471 gas controllers (up to 6 maximum), the Q2050 series is also offered with or without a preinstalled 24vdc power supply. All enclosures include preinstalled field wiring terminal ...
-
Manufactured by DOD Technologies Incbased in USA
The ChemLogic CL2 Dual-Point Detector provides continuous monitoring and quick response to low level toxic and corrosive gases. ChemLogic Detectors are low-maintenance offering reliable, interference-free colorimetric gas detection. The system utilizes ¼” tubing that allows samples to be drawn up to 150-feet for most gases. ChemLogic Detectors are easy to install. Simply plug them ...
-
Manufactured by Kuntze Instruments GmbHbased in GERMANY
The GAS sensor is a amperometric sensor for measuring Chlorine ...
-
Manufactured by Kimessa AGbased in SWITZERLAND
Chlorine gas diffuses into the sensor and reacts at the sensing electrode on the surface of the electrode. The counter electrode acts to balance out the reaction at the sensing electrode by reducing oxygen in air to water. The oxygen from the ambient air diffuses at the back side into the sensor. A high reserve of electrochemical activity ensures that each sensor has a long life time (see ...
-
Manufactured by Gaffey Technical Services Ltd.based in UNITED KINGDOM
chloriGAS is the cost effective solution to monitoring a single toxic gas. Ideal for use in applications such as swimming pool and industrial plant rooms. chloriGAS provides clear indication of gas hazards in a simple to use ...
-
Manufactured by Controlmatik ABW d.o.o.based in SLOVENIA
The M 2103 C series Controlmatik ABW measuring probe for chlorine gas is designed to measure and indicate chlorine concentrations in the air. The probe is mounted in an IP 65 housing and is connected via connector to the amplifying electronics, which is also mounted in the IP 65 housing. Sensor is, with two-wire current loop, connected to the unit according to the enclosed ...
-
Manufactured by Controlmatik ABW d.o.o.based in SLOVENIA
The M 4510 series Controlmatik ABW detection unit is assembled as separate signal evaluation unit with display, limiter unit with two adjustable alarms and unit fault alarm, power supply unit and separate detection cell - ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The ChlorineTrak 760S has been specifically designed to perform as an accurate and cost-effective mass flow measurement solution for chlorine injection processes found in typical waste-water treatment applications. Given the corrosive nature of chlorine gas (particularly in the presence of moisture), extremely expensive Hastelloy was needed for main flow body construction. And this drove the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you