Chromatography Equipment For Monitoring And Testing Available In Tuvalu
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The type of sample loading on a flash cartridge or a prep HPLC column has a big impact on the final purification results. With the Pure sample loading portfolio, the chemist has the choice between several convenient ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The patented Cartridger C-670 allows quickly and simply packing high performance cartridges for reliable flash chromatography separations. Together with a substantial cost reduction, it provides the possibility to fill the cartridge with the silica quality of your ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep C 4 - 50/4.0 is the shortest separation column in the Metrosep C 4 product range. With a capacity of 5 µmol (K+), it is particularly suitable for very rapid separations. The low capacity makes it possible to quickly analyze the earth alkaline metals with their delayed elution. Thanks to the short retention times, applications that, in terms of analysis duration, were previously ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 5 - 250/2.0 is the microbore high-performance separation column with which even complex separation problems can be solved easily and reproducibly. The range of applications possible with this column far exceeds the detection of standard anions. The Metrosep A Supp 5 - 250/2.0 is used wherever maximum separating efficiency must be combined with both the lowest of detection ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The GLS Sampler CIC (TEI) is used to analyze liquid gas or gases under increased pressure using Combustion IC. It can be used in combination with either the manual or the automated Liquid Introduction Module for the Combustion Oven ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 5 - 150 in the Microbore version is distinguished for its excellent separation properties. The particle size of 5 µm makes a decisive contribution to the separating efficiency of this column. The Metrosep A Supp 5 - 150/2.0 offers the optimum combination of selectivity and capacity, with which even complex separation tasks can be solved within a short time. The 2 mm ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Hamilton PRP-X100 - 250/4.0 IC anion column is a robust separation column based on a polystyrene-divinylbenzene copolymer. It is mainly used with difficult matrices, e.g., dyes. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 930 Compact IC Flex SeS is the intelligent Compact IC instrument with sequential suppression. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
You routinely purify your samples on an open glass column and have to cope with a limited resolution and a long separation time. As a first step towards automation, we offer two small systems: the “Easy Synthesis” and the “Easy Extract” systems allow you to control the flow rate and the eluent ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 940 Professional IC Vario ONE/SeS/PP is the intelligent IC instrument with sequential suppression and a peristaltic pump for suppressor regeneration. The instrument can be used with any separation and detection ...
-
PremiumManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE chromatography resin has a very high level of uniformity coefficient (1.1 or less), resulting in excellent separation ability. It has relatively small particles, which provide a large surface area per unit volume, leading to high separation efficiency. Additionally, it has high physical and chemical strength, enabling a long service life and earning recognition in the market. It is ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline preconcentration technique, Inline Matrix Elimination, sequential suppression, and conductivity detection enables ultratrace analysis down to the lowest ppt range (ng/L) of anions or cations in complex ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 889 IC Sample Center is a robust Autosampler for high sample throughput, optimized for the challenges of the modern analytic laboratory. It works in accordance with the x-y-z principle and a syringe control with high resolution for precise sample injection. A double needle system enables the penetration of vessel caps and septa. A PEEK injection valve completes the automation system of the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
TitrIC flex II – for complete analysis of anions and cations. Fully automated system for direct measurement of temperature, conductivity, and pH value, as well as for titrimetric determination of p value and m value. The cations (including calcium and magnesium) and anions are determined simultaneously with ion chromatography following Inline Ultrafiltration. Automatic calculation of the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Process Ion Chromatograph from Metrohm Process Analytics offers unattended, high precision analyses for a wide spectrum of ionic species in aqueous media. The Process IC is available with either one or two measurement channels, along with integrated liquid handling modules and several automated sample preparation options. System modularity, combined with Metrohm’s decades of experience ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 930 Compact IC Flex Oven/ChS/Deg is the intelligent Compact IC instrument with column oven, chemical suppression and built-in degasser. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Module (Oven + LPG/GSS, AJ) enables sample digestion during the pyrolysis of liquefied gases and gases under pressure. The Combustion Module (Oven + LPG/GSS, AJ) is comprised of the combustion oven and the LPG/GSS module. Both are products of Analytik Jena which have been optimized specially for coupling with ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 919 IC Autosampler plus fulfills the requirements of laboratories with medium sample numbers. It enables automation of the full range of Metrohm IC ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Reliably collecting the separated compounds is the ultimate goal of a preparative chromatography application. The Fraction Collector C-660 collects all your samples according to time, volume or peak mode in any type of tubes or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you