Combustion Monitoring Applications

20 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Combustion Monitoring ×

Ozone monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Ozone found in ambient air can have a direct affect on human health and also has the potential to create photochemical smog. It is for this reason that the U.S. EPA has set a one hour limit of 120 ppb and an 8 hour limit of 80 ppb. Ozone has been found to affect human health by harming the respiratory and immune system. People with pre-existing respiratory damage or diseases are more likely to suffer from the affects of ozone.

Measurement of hydrogen in fuels for oil & gas industry

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

The combustion properties of fuels are key to the efficient and safe operation of engines used in machinery and plant. One important way to measure the combustion properties of a fuel is by its hydrogen content. The measurement of hydrogen content is widely used for the characterisation of aviation fuel but with the increasing costs of all fuels and the greater incentives for fuel adulteration, this test is increasingly being adopted for non-aviation applications. Our benchtop NMR analyser MQC-23 system is widely used for the measurement of hydrogen in fuels in accordance with ASTM D7171-05.

Integrated real-time gas analysis solution for emissions industry

by CIC Photonics, Inc.     based in Albuquerque, NEW MEXICO (USA)

Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of toxic combustion products, including CO, CO2, NOx, SOx, CH4, CxHy, H2S, etc. The EP-IRGAS-SPA is also applicable for fast time responses.

Marine And Offshore Emissions Monitoring & Analysis

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Fuels and exhaust gas emissions are subject to international, regional and national controls and Charterers, as well as the public, demand high standards of performance and reliability.

Measurement solution for QAL2 EN 14181

by Protea Limited     based in Middlewich, UNITED KINGDOM

BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard.

Integrated real-time gas analysis solution for combustion efficiency sector

by CIC Photonics, Inc.     based in Albuquerque, NEW MEXICO (USA)

CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

Gas measurement for the pulp & paper industry

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements for the harsh environment of a recovery boiler facility, without restricting airflow even in short run ducts.

Combustion gas analysis for the indoor environment industry

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

Gas monitoring instruments and systems for engine emissions measurements

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

Gas detection analyzers for storage

by Control Instruments Corporation     based in Fairfield, NEW JERSEY (USA)

Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.

Gas monitoring for landfills

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements with a number of features specifi cally tailored for landfi ll gas monitoring applications.

Combustion gas analysis for the glass industry

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

CO2 / CO Monitoring in Air

by Unisearch Associates Inc.     based in Concord, ONTARIO (CANADA)

CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

Actuators for the power generation

by Rotork     based in Bath, UNITED KINGDOM

As well as traditional power stations, applications for Rotork products are found on renewable energy generation such as solar thermal plants and on CO2 emissions reduction processes such as flue gas desulphurisation and carbon capture and storage.

Measurement solution for multi-stream combustion research

by Protea Limited     based in Middlewich, UNITED KINGDOM

Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

PTR-MS systems for environmental research

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

IONICON PTR-MS systems are well established tools in environmental research. Their fast response-times and ultra-low detection limits help researchers all over the planet to better understand the world we live in.

Environmental Impacts & Land-based Operations Monitoring

by Ecometrica     based in London, UNITED KINGDOM

- Provide transparency and evidence to support assertions on impacts and remediation - Efficient interaction with stakeholders, regulators and NGOs - Early warning and monitoring of critical issues such as damage to ecosystems, water table changes, windblow.

Need help finding the right suppliers?

Let the XPRTs do the work for you