combustion optimization system Articles

  • Optimizing VOC Combustion - Case Study

    Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. ...

  • Case study - Oxidizer system optimization

    OXIDIZER SERVICE SERIES: PART 4 As promised, this is the fourth installment of Anguil's Oxidizer Service Series. If you have read through the first three parts, this can be seen as a capstone of those efforts. Having a strong oxidizer service plan, backed up with recommended spare parts and all of the proper documentation will not only improve your system performance but also allow you to focus ...

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • A Modelling Approach to the Design Optimization of Catalytic Converters of IC Engines

    ABSTRACT In this paper, a modelling approach to the design optimization of catalytic converters is presented. The first step of the optimization is the model-assisted sizing of catalysts. For ...


    By DCL International Inc.

  • CFD modelling of sampling locations for early detection of spontaneous combustion in long–wall gob areas

    In this study, computational fluid dynamics (CFD) modelling was conducted to optimise gas sampling locations for the early detection of spontaneous heating in longwall gob areas. Initial simulations were carried out to predict carbon monoxide (CO) concentrations at various regulators in the gob using a bleeder ventilation system. Measured CO concentration values at these regulators were then used ...


    By Inderscience Publishers

  • Analytik Jena AG: State of the Art - Fully Automated and Matrix-Optimized Gas Analysis with multi EA 5000

    The analysis of gaseous matrices is still a real challenge. No matrix type is as versatile in its behavior and the requirements for sample feed and combustion process. This makes it difficult to gain quick, precise, and reliable results. Thanks to the outstanding flexibility of the application-optimized gas sampling systems, the elemental analyzer multi EA 5000 can analyze liquefied gases (LPG), ...


    By Analytik Jena AG

  • Hydrogen production from formic acid solution by modified TiO2 and titanate nanotubes in a two-step system under visible light irradiation

    Hydrogen gas is one of the most promising renewable energy sources, and the final product of hydrogen combustion is nothing but water. However, it is still a big challenge to produce hydrogen and store it. Many studies have been conducted into produce hydrogen from water using photocatalysts. Z-scheme photocatalysis is a two-photocatalyst system that comprises a hydrogen catalyst and an oxygen ...


    By IWA Publishing

  • Modeling Analysis of Fuel Sprays

    Current engine development processes in which computations play an important role have sought for numerical models which can accurately represent phenomena in spray combustion. The authors have developed original sub-models taking into account the effects of extensive spray combustion phenomena including nozzle cavitation, droplet breakup behavior, multi-component evaporation process, spray-wall ...


    By HORIBA Europe GmbH

  • Engine Testing

    Engine testing involves measurement of rotating speed and torque of the engine by applying load controlled by a dynamometer connected to its output shaft. HORIBA has developed various types of dynamometer for the purpose of engine testing. They are mainly classified into two types; one is absorbing only dynamometer such as hydraulic dynamometers and eddy-current dynamometers, the other is ...


    By HORIBA Europe GmbH

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • What Should be Noted when Using a Rotary Kiln?

    Rotary kiln for sale is the core of the whole cement production line and the technical management plays a vital role in the stable and continuous operation of rotary kiln. Here Kefan Machinery gives a summary to the possible failure and solutions in ...

  • FTIR emissions analyser helps manage UK power station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Quantitech Ltd

  • FTIR Emissions Analyser helps manage UK Power Station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Gasmet Technologies Oy

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Milton Keynes based Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Quantitech Ltd

  • Magnetic Fuel Treatment Bottom Line Analysis

    BOTTOM LINE ANALYSIS This cost savings analysis was prepared in cooperation with Master Chief Hill of the US Coast Guard Maintenance & Logistics Command using data from the 82’ Cutter Pt. Chico, and 110’ Cutters Anacapa and Long Island over a period of two years when ALGAE-X® performance was monitored and evaluated. Installation of ALGAE-X® units in Diesel Engine applications results in ...


    By AXI International

  • A novel spectrometer design for process and handheld infrared spectral measurements

    Introduction Infrared spectroscopy offers many unique advantages for measurements within an industrial environment. Historically, the technique has been used for a broad range of applications from the composition of gas and liquid mixtures to the analysis of trace components for gas purity analysis. In cases where a well-defined method of analysis is involved, such as the measurement of ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you