Combustion Monitoring Equipment For Monitoring And Testing Available In Iran
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The ATP-300B is a compact, lightweight and integrated high performance infrared spectrometer based on Fourier transform technology. The product consists of a light source, interferometer and detector. The spectrometer adopts a double hollow corner reflector with double pendulum design,which has the advantages of permanent alignment, good anti-vibration and anti-thermal effect; The detector is an ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is received by the controller in less than 1 second. ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
We research and development of ESE-IR-200 series NDIR-GFC Gas Analyzer , mainly based on non-dispersive infrared photoelectric (NDIR) detection technology, infrared wavelength filtering technology (GFC) and self-designed long-term optical path gas absorption cell (L-Cell) technology and the realization of gas in the infrared band quantitative analysis, this instrument mainly measures CO, CO, CH4, ...
-
Manufactured by Suzhou Topologybased in CHINA
The high capacity pleated filter is a new product developed by S.I.P Topology Environmental Protection and Purification Co., Ltd. The filter cartridge has a large diameter of 160 mm and no central support skeleton, one side end with a handle and the another end sealed. Its filtration fluid is from inside to outside. The large diameter design of the filter increases the effective filtering area, ...
-
Manufactured by Nittoseiko Analytech Co., Ltd.based in JAPAN
Combustion TOC (total organic carbon) analysis is a popular technique for monitoring environmental water and discharge fluids; however detection performance for suspended matter in can be poor. The TOC-310V boasts a reliable, high-sensitivity Mitsubishi Chemical Analytech detection system together with direct injection for enhanced detection of suspended matter in samples. Combustion oxidation: ...
-
Manufactured by Avilo Stikstof en Persluchtsystemen B.V.based in NETHERLANDS
The Parker Balston H2PEMPD-1300 hydrogen generator produces ultra high purity hydrogen utilising a combination of PEM cell technology and a palladium purifier. With an adjustable delivery pressure between 0.7 and 6.8 bar, or 0.7 and 11.9 this generator produces 1.300ml hydrogen per minute with a purity of at least ...
-
based in INDIA
NEO Monitors LaserGas™ iQ2 analyzer is the first to measure up to four gases (O2, CO, CH4, H2O)* and temperature depending on configuration, which eliminates the need for multiple units for combustion analysis. The cutting-edge design and ground-breaking functionality, ensures that the instrument delivers unmatched reliability and durability. By providing an optional single flange ...
-
Manufactured by Shenzhen Eyesky Technology Co.,LTDbased in CHINA
TFT LCD Display CO H2S CO2 Portable Multi Gas Detector For Gas Leak Test; Weight: 300g. Product Name: New Baterry Operated Natural Gas 4 In 1 Gas Detector. Alarm Type: Light Alarm. Adjustable Alarm Values. Usage: Household Safe. Color: Yellow. Response Time: ≤10S. Display: 2.4 Inch Color LCD. Operating Humidity: 15%-95%RH ...
-
Manufactured by Henan Konli Environmental Sci-Tech Co., Ltdbased in CHINA
Pellet machine could use various renewable biomass wastes (like corn stalk, groundnut husk, sawdust, waste branch, wood bark, etc.) to make fuel ...
-
Manufactured by Guangzhou QinSound Acoustics Technology Co., Ltd.based in CHINA
Wood hole acoustic board is a front and back are perforated wooden sound-absorbing panels, positive aperture is greater than the back of the aperture. The sound can pass through the back hole through the front hole. Circular sound-absorbing wood acoustic board in accordance with the principle of rational and reasonable, with excellent noise reduction performance, on the high-frequency sound ...
-
Manufactured by Xi`an Dingyan Technology Co., Ltd.based in CHINA
Alarm gas detector The alarm gas detector is a natural diffusion method to detect gas concentration. It adopts imported catalytic combustion and electrochemical sensor, which has excellent sensitivity and excellent repeatability. Product features The LED digital display suitable for ...
-
Manufactured by TANDA Development Pte.Ltdbased in SINGAPORE
TR3100, Smart Combustible Gas Detector, Its measurement range is 0 ~ 100%LEL. It adopts MCU with excellent performance, the chipset is build in special program to identify the gas value. When the gas reaches the alarm value, it will send out sound and light alarm signals and automatically cut off the gas source. Widely used in home automation, store security and other fire safety ...
-
Distributed by Systems Control Instrumentation, Inc.based in PHILIPPINES
Analytical Instruments. Bar Code Printer. Calibration Instruments. Combustible & Refrigerant Gas. Analyzers and Monitors. Combustible and Gas Leak. Detectors. Combustion Analyzer (Electronic and Mechanical). Control Valves. Controllers and Indicators. Data Loggers and Recorders. Flow Meters. Gas Instrumentation. HVAC Equipment. Instrument Wires and Cables. Process Refractometer. Process ...
-
Manufactured by KaraJetbased in IRAN
Silencers are used to reduce noise associated with internal combustion engine exhausts, high pressure gas or steam vents, compressors and fans. They attenuate and/or absorb air-born sound waves propagated in a flowing medium. These examples lead to the conclusion that a silencer allows the passage of fluid while at the same time restricting the free passage of sound. They are normally ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you