Combustion Monitoring Equipment For Monitoring And Testing In Texas
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is received by the controller in less than 1 second. ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
Manufactured by Nittoseiko Analytech Co., Ltd.based in JAPAN
Combustion TOC (total organic carbon) analysis is a popular technique for monitoring environmental water and discharge fluids; however detection performance for suspended matter in can be poor. The TOC-310V boasts a reliable, high-sensitivity Mitsubishi Chemical Analytech detection system together with direct injection for enhanced detection of suspended matter in samples. Combustion oxidation: ...
-
Manufactured by Powertherm Maxim A Miratech Companybased in USA
The M11 is engineered for light industrial areas where background noise is relatively high and constant. The need for higher degrees of silencing should be minimal, keeps engine exhaust noise within existing levels. Typical application: Internal combustion engine exhausts in light industry areas with relatively constant background ...
-
Manufactured by Global Detection Systems Corp. (GDS)based in USA
The Spectrex SafEye Quasar 900 is an open path detection system which provides continuous monitoring for combustible hydrocarbon gases. It employs “spectral fingerprint” analysis of the atmosphere using the Differential Optical Absorption Spectroscopy (DOAS) ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer provides an additional layer of safety in burner management ...
-
based in USA
The R-4864 is an ideal solution for monitoring up to 16 critical input variables. Flexibility: Built around ‘plug and play’ input and output modules, the ToxGas Ranger Series Controller can accept signals from wireless monitors, analog sensors, digital sensors, discrete inputs or even direct connection to bridge-style combustible or VOC sensors. Built in calibration mode, three ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in pre-combustion and flue gas applications and provide air/fuel ratio ...
-
Manufactured by ESP Safety, Inc.based in USA
ESP Safety’s SGOES Gas Detector monitors concentration of hydrocarbon gases in the environment. The SGOES is configured to report alarms when the gas concentrations in the environment reach each of three independently programmable levels, expressed as a percentage of the lower explosive limit (LEL) in the air. As determined by application requirements, the SGOES is factory calibrated ...
-
Manufactured by TOC Systems, Inc.based in USA
StarTOC Semi-Automatic Bench Top TOC is a low cost, accurate analyzer which utilizes components and software from the StarTOC Family of computer-controlled automated TOCs. Since operation and maintenance are extremely simple, it may be the analyzer of choice when less than 20 samples per day are to be ...
-
Manufactured by PAC L.P. A Roper Companybased in USA
ASTM D4629, ASTM D5176, ASTM D5453, ASTM D5762, ASTM D6667, ASTM D7183, ASTM D7359, DIN 38409, EN ISO 20846, ENV 12260, UOP 936, UOP 971, EN 15486, ASTM D7551, ASTM D7184. Antek's MultiTek is the leading instrument on the market that combines testing for sulfur, nitrogen, and halides all in one. Compact, powerful, automated, and multi-configurable, its the perfect solution to todays increasing ...
-
Manufactured by Global Detection Systems Corp. (GDS)based in USA
The GDS-48 Remote Sensor accepts catalytic bead combustible sensors, SmartIR infrared combustible sensors, and Photoionization VOC sensors and can be used to detect combustible gas, carbon dioxide and volatile organic compounds such as benzene or ...
-
Manufactured by ESP Safety, Inc.based in USA
ESP Safety's TGAES Gas Detector is an open path infrared gas detection system that provides continuous monitoring of combustible hydrocarbon gas concentrations at a distance of 5 to 200 meters. Standard system outputs include an electrically isolated/non-isolated 4-20 mA DC current output, with HART and RS-485 MODBUS communication. Alarm and fault relays are available as an option. ESP's TGAES ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you