Condition Monitoring Applications

14 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Condition Monitoring ×

Chemical Water Treatment for equipment & engineering

by Kurita     based in Ludwigshafen, GERMANY

Equipment and Engineering offers the right solution for your application of Kurita Products. Starting from simple dosing pumps up to specific dosing systems for special applications Kurita provides you the right solution for your application. Moreover Kurita offers also monitoring and control equipment to analyze that the right concentration of your Kurita products is being used in your system. Further Kurita provides specific equipment to follow the KPIs of your system, so you can be sure that the expected treatment effect is achieved.

Emissions Monitoring

by Opsis AB     based in Furulund, SWEDEN

The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium smelters.

Infrared Sources for Capnography

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO2) in the respiratory gases. The CO2 concentration during a single breath is measured in a high temporal resolution to monitor the condition of the lungs.

Measurement solution for hospital workplace exposure monitoring

by Protea Limited     based in Middlewich, UNITED KINGDOM

In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air.

Noise monitoring solutions for sound power

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

Noise emission values are increasingly becoming marketable items for machines, equipment and appliances - low noise emissions directly relate to lower noise exposure for product users and bystanders. Retail customers, both private and corporate, appreciate this relationship and are, therefore, more aware of noise emission declarations on goods when deciding their purchases.

Disaster and Epidemic Response

by Omnitec Design, Inc.     based in Mukilteo, WASHINGTON (USA)

Anywhere there is a large gathering of people, respiratory infections can be acquired due to exposure to airborne pathogenic microorganisms. To help prevent the spread of diseases the Center for Disease Control (CDC) recommends that potential problem areas be isolated and the air purified by portable, HEPA air filtration equipment. OmniAire and OmniAire PAC portable HEPA air filtration machines provide a clean air supply necessary to protect the public in gathering areas such as schools, emergency shelters or temporary healthcare facilities. To comply with CDC guidelines to prevent the spread of disease and contamination of sensitive areas, OmniAire HEPA air filtration machines are commonly used to: -Create a negative air pressure in isolation containment -Supply purified air for required air changes (ACH) -Sanitize airflow in operating and patient’s rooms -Purify air in waiting rooms and public areas -Prevent contamination in compounding pharmacies

Roadside monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Traffic, especially in urban locations, is one of the greatest contributors to air pollution. Traffic produces a variety of different pollutants that include particulates, NO2, NO, CO, hydrocarbons and in some cases SO2. The monitoring of roadside pollution can be challenging as often it is difficult to find suitable locations for large air quality monitoring systems and many sites that are available can be too far away to be representative of roadside air pollution.

Gas monitoring instruments and systems for DeNOx process control

by Gasmet Technologies Oy     based in Helsinki, FINLAND

In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

Emissions Monitoring for Mining / Emissions Monitoring for Smelting

by Opsis AB     based in Furulund, SWEDEN

The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

Flow & Energy Management Solutions for plant & machine

by Spire Metering Technology     based in Marlborough, MASSACHUSETTS (USA)

Spire Metering offers several solutions for leakage detection. The flowmeters are used to monitor cooling water in machining process. They are used also in liquid process control and leakage detection applications.

Solution for the fish/seafood icing areas

by Vogt Ice / Turbo     based in Louisville, KENTUCKY (USA)

Fresh caught, processed fish and shellfish products requiring preservation of quality with ice. Ice is used at all points in the chain of handling fish and seafood - on board vessels during the catch, dock side to preserve the fish during transport to the market or processing area, central processing areas, and transporting of fish and seafood after processing requires continuous temperature control to maintain the best quality and extend the shelf life. The use of ice reduces bacteria or enzyme activity in seafood products, slows decay, and yields a higher quality grade. Ice provides a sanitary means for this preservation.

Tunnel Construction and Underground Mining

by EmiControls     based in Bolzano, ITALY

Dust can pose a particular hazard for people working in enclosed spaces such as in tunnel construction and deep mining. As the workers inhale, dust gets into their airways and can cause health problems. Poor visibility brings added exposure to risk. A reduction in the amount of dust generated also lengthens the service life of the machines. Therefore efficient dust control is particularly important in this industry.

Traffic Emissions Monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Traffic, especially in urban locations, is one of the greatest contributors to air pollution. Traffic produces a variety of different pollutants that include particulates, NO2, NO, CO, hydrocarbons and in some cases SO2. The monitoring of roadside pollution can be challenging as often it is difficult to find suitable locations for large air quality monitoring systems and many sites that are available can be too far away to be representative of roadside air pollution. Roadside pollution concentrations can change quickly as types and volume of traffic changes and so instrumentation used must be able to cope with these rapidly changing conditions. Ecotech has established a wide variety of roadside monitoring stations incorporated both into large walk-in style shelters to compact monitoring shelters. Our solutions can be tailored to your needs. Ecotech`s compact solution uses a compact monitoring shelter fitted out with a variety of analyzers and particulate monitors. These analyzers offer fast response, minimal maintenance and are widely used for roadside monitoring.

Noise monitoring solutions for machine diagnostics

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

Due to production and assembling tolerances, wear and load variation, the moving parts in any rotating machine will sooner or later cause annoying vibrations that eventually lead to breakdowns.

Need help finding the right suppliers?

Let the XPRTs do the work for you