Conductivity Monitoring Applications available in Virginia
-
Premium
Hand-Held & Process Control Water Testing Instrument for Environmental Industry
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Heat Exchangers Solutions for Process Water Industry
Process water covers a wide range of uses, including general heating and cooling applications, cleaning and transportation, boiler feed water, engine cooling and even chemical and product dilution and suspension. While softer water is generally better to avoid scaling problems, the exact parameters, such as oxygen and carbon content, conductivity and purity will depend both on the water source (for example whether from mains water, private supply or recovered from elsewhere in the process) and its ...
By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.
-
Premium
Inspection Cameras for Water, Wastewater and Stormwater Systems
Water and wastewater pipelines require ongoing maintenance and quick, professional emergency response to avoid costly repairs, major financial losses, frustration on the side of the clients and al lot of other problems. Whether it is a simple sewer clog in a residential building or a pipeline problem at a water treatment plant, they need to be dealt with immediately. Whoever provides the quickest and the most efficient solution will get the job in the ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Fountain Solutions
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Visual inspection solutions for the sewer and wastewater industries
Inspection Cameras for Water, Wastewater and Stormwater Systems. Water and wastewater pipelines require ongoing maintenance and quick, professional emergency response to avoid costly repairs, major financial losses, frustration on the side of the clients and al lot of other problems. Whether it is a simple sewer clog in a residential building or a pipeline problem at a water treatment plant, they need to be dealt with immediately. Whoever provides the quickest and the most efficient solution will get the job in ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Water Testing for Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
ADVANCEES - Ultrapure Water Application - Custom skid-mounted water purification equipments
Ultrapure water (UPW) is water that has been purified to very strict specifications, containing by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,055 uS/cm at 25oC, also expressed as resistivity of 18,2 MOhm. Ultra-pure water is mainly used in the semiconductor and pharmaceutical industry often is produced through processes like membrane filtration or ion exchange to reach the ultimate conductivity of 10 uS/cm. The demineralized water is then processed ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Industrial filtration solutions for waste water / sewage sector
Waste water treatment and water purification for potable water dewatering and decontamination of industrial and municipal waste water: sewage from dust scrubbers, paper, leather and latex waste water, grinds of wood and stone, coal and ore suspensions from flotation processes neutralization plants, oil refineries metal hydroxide sludges (galvanic) drilling mud of oil ...
By JVK Filtration Systems GmbH based in Georgensgmünd, GERMANY.
-
Seismic borehole and surface solutions for dyke investigation sector
Strength characterization: Seismic methods are suitable to study the strength characteristics of dyke and dams. Seismic measurements are sensitive to density changes and compactness of soils. Therefore, areas with inadequate compactness of dykes can be detected. A correlation with SPT/CPT (Standard/Cone Penetration Testing) is often done because these methods also depend on the mechanical properties of the ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Chemical water solutions for the process cooling water sector
Large or Small Process Cooling Water Applications are Perfect for AMSA BCP Chemistry. oth open loop and closed loop process industrial cooling systems will have cleaner surfaces, allowing more efficient heat exchange and cooling when AMSA BCP chemistry is included in the chemical treatment ...
By AMSA, Inc. based in Auburn, MICHIGAN (USA).
-
Flood resilience solutions for the critical infrastructure sector
Aquobex provides a bespoke service along with highly engineered products to ensure critical infrastructure sites and individual assets are protected and continue to offer service during floods or immediately after flooding subsides. Passive flood barriers, manual flood barriers, flood doors and flood gates can be designed into a scheme to protect specific locations. Alternatively mobile flood barriers can be provided with state-of-the-art geo-located flood sensors and emergency response systems. Aquobex can take ...
By Aquobex based in Didcot, UNITED KINGDOM.
-
Water quality monitoring systems for feedwater, storm & condensate industry
The most important parameters in Water/Steam Cycles such as Cation conductivity, dissolved oxygen and pH are available as pre-assembled and factory tested units. Dedicated analyzers for sodium, silica, phosphate and hydrazine are also factory tested and calibrated for immediate ...
By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.
-
Electrical Based Tomography Systems for Slurry Flow
Slurry transportation is required in a diverse range of sectors, from food to minerals processing; and oil sands processing to nuclear waste management. As a process it requires significant levels of energy and the abrasive nature of materials used can lead to ongoing issues of pipeline ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Environmental monitoring solutions for freshwater sector
University of Helsinki is one of the founding members of the League of European Research Universities (LERU) focusing on intensive research across many disciplines and international cooperation. At Lammi Biological Station, a designated LTER (Long Term Ecological Research) research site, the University of Helsinki partnered with Vanaja Water Protection Foundation to monitor water quality in the Vanajavesi Watershed. Water quality measurements include water turbidity, cyanobacteria, oxygen and nitrogen content, ...
By Masinotek Oy based in Vantaa, FINLAND.
-
Electrical Based Tomography Systems for Crystallisation/Precipitation
Crystallisation is a key reaction in pharmaceutical and other process sectors. The combination of two ionic species in solution to form a solid frequently produces a strong change in electrical properties which can be tracked using ITS electrical resistance tomography sensors. Sensor arrays are produced on two different ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Electrical Based Tomography Systems for Multiphase Flow
Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Waste water treatment solutions for surface technology
Industry challenge. Surface technology optimises parts and tools to meet specific requirements. Processes used in surface technology: Chemical pre-treatment of surfaces, e.g. cleaning, degreasing, etching. Mechanical surface treatment, e.g. grinding, polishing. Surface coating, e.g. painting, powder coating. Water is an essential ingredient in many of these processes, for example in pre-treatment. As a consequence, water can contain a wide variety of substances after completion of the respective ...
By KMU LOFT Cleanwater GmbH based in Hausen, GERMANY.
-
High quality water filtration solutions for leachate sector
A difficult problem that is not commonly thought about is the wastewater from landfills, known as leachate. With the ever growing population, this is a rapidly increasing concern around the world, particularly because of how volatile the leachate tends to be in most cases, making it difficult to filter efficiently. However, this is not a problem for Lighthouse with our state of the art filtration systems. To start, any bacteria in the influent wastewater would be removed by disinfection, typically with ultraviolet ...
By Lighthouse Filters, LLC based in Dahlonega, GEORGIA (US) (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you