Conductivity Monitoring Equipment available in Cape Verde

Available in Cape Verde| Near Cape Verde
460 Results found

We couldn't find any results in Cape Verde

Here is a list of results available in Cape Verde

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Conductivity Monitoring ×

  • Available in: Africa ×

  • Available in: Cape Verde ×

Model ECO406 - Continuous Conductivity Indicator

by Adwa Hungary Kft.     based in Szeged, HUNGARY

These continuous indicators are designed for easy maintenance, simple to read, accurate readings and cost effective purpose, so to meet the general requirements of all range of users.

Model P4 - Conductivity Level Controller

by Hawker Electronics Limited     based in Birmingham, UNITED KINGDOM

Plug in (via DIN base) level controller with close switching differential suitable for the majority of applications. Fully adjustable sensitivity between 100 ohms to 18,000 ohms. Switch selectable fail to safe operation with LED indication. Two sets of volt free changeover contacts with LED for relay operation and also a power on LED. Moulded ...

Model CT2X Series - Conductivity & Temperature Sensor

by Instrumentation Northwest Inc. (INW)     based in Kirkland, WASHINGTON (USA)

The CT2X is a conductivity and temperature sensor with built-in datalogging. Incorporating a 4-pole epoxy and graphite electrode cell, it is extremely durable and resistant to data interferences—making it excellent for use in rugged field conditions. The CT2X also comes with INW’s powerful, easy-to-use

Model DJS-1 - Conductivity Electrode

by Shanghai Ruosull Technology Co Ltd     based in Shanghai, CHINA

K=1 Conductivity Electrode with glass body 2 cells platinum plates with black Pt. or bright Pt. choice Suitable for application in laboratory and in field. Cell Materia Glass/Pt, Cell Constant (cm-1) 1±0.1, Dimensions(mm) Φ12x150.

Model C3645W - Conductivity Controller

by Automated Water & Effluent Ltd (AWE)     based in Beaconside,, UNITED KINGDOM

C3645W Conductivity Controller in IP55 enclosure ranges 0-200 μS, 0-2000 μS & 0-20.00 mS, 1 set point 0 - 40 sec delay timer & 4 - 20 mA O/P mains supply 115 / 230 VAC.

Jenway - Conductivity Bench Meter Accessories

by Bibby Scientific Limited     based in Stone, UNITED KINGDOM

A number of accessories are available for use with the 4510 and 4520 conductivity meters and the 3540 combined pH and conductivity meter.

Model EM31-MK2 & EM31-SH - Conductivity Meter

by Geonics Limited     based in Mississauga, ONTARIO (CANADA)

The EM31-MK2 maps geologic variations, groundwater contaminants, or any subsurface feature associated with changes in ground conductivity. Using a patented electromagnetic inductive technique that allows measurements without electrodes or ground contact. With this inductive method, surveys can be carried out under most geologic conditions ...

Conductivity Meter - Digital & Microprocessor Based

by VSI ELECTRONICS PVT. LTD.     based in Mohali, INDIA

The Conductivity Meters that we offer to our customers are used for conductivity measurements in reputed research institutes and industries. Different models that we have include Digital Conductivity Meters and Portable Conductivity Meters. Offering excellent functional life, these meters are a valuable investment for our customers. Due to the ...

Solinst Levelogger Junior - Model 3001 - Water Level, Temperature and Conductivity Dataloggers

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The LTC Levelogger Junior provides the convenience of conductivity, temperature, and water level measurements in one instrument. The LTC Levelogger Junior combines a data logger, 5-year battery, pressure transducer, temperature and conductivity sensors in a small waterproof stainless steel housing, 7/8' x 7.5' (22 mm x 190 mm). Compatible with ...

Metrohm - Model 780 and 781 - Advanced Laboratory pH and Ion Meters

by Metrohm AG     based in Herisau, SWITZERLAND

The 780 pH Meter and 781 pH/Ion Meter are the instruments of choice for those seeking an elevated level of technical comfort and freedom in their measurements of pH, ORP, Ipol, Upol, and ion concentrations. The meters, which are equipped with built-in quality assurance, guarantee reliable results at all times. Features such as the internal method ...

IC Controls - Model 210-C-TDS - Boiler Water Total Dissolved Solids (TDS) Analyzer

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The Boiler Water Total Dissolved Solids (TDS) Analyzer model 210-C TDS from IC Controls gives you maximum flexibility, reliability, and ease of use. The Total Dissolved Solid measurement are critical to your boiler and must be strictly monitored and maintained to ensure maximum operating efficiency. The 210-C TDS was ...

HORIBA LAQUA - Model DS-70 Series - Benchtop Conductivity Meter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

An Industry First intuitive control with the large capacitance touch panel. If problems occur during calibration or measurement, navigation will walk you through until the problem is solved. Easy to clean glass top and round body. LAQUA is both easy and fun to use!.

Model DM-2EC - Commercial Inline Dual EC Monitor

by HM Digital, Inc.     based in Culver City, CALIFORNIA (USA)

Inline ELECTRICAL CONDUCTIVITY monitor that can be installed on industrial water filtration systems such as car washes, window washing, manufacturing, and food processing.

Jenway - Model 470 - Portable Conductivity Meter

by Bibby Scientific Limited     based in Stone, UNITED KINGDOM

The 470 hand held conductivity/TDS meter allows calibration by direct cell constant entry or through the use of standard solutions. The display simultaneously shows temperature compensated conductivity or TDS and temperature. For optimum resolution the best conductivity/TDS range is automatically selected, whilst temperature compensation is ...

Model Q45C2 - 2-Electrode Conductivity Monitor

by Analytical Technology, Inc. (ATI)     based in Collegeville, PENNSYLVANIA (USA)

Low-level conductivity measurements are essential for monitoring a variety of high purity water systems. The proper operation of deionizers, reverse osmosis membranes, ion exchange systems, and heat exchangers require constant monitoring to ensure high quality production.

Geonics - Model EM-34 - Well Respected Conductivity Instrument

by Geonics Limited     based in Mississauga, ONTARIO (CANADA)

The Geonics EM-34/3 is a well respected conductivity instrument for deeper surveying applications. Offered with 3 coil spacing’s, 10, 20, and 40m, this allows investigations depths of up to 60m. A 2 man system, the EM-34/3 is used routinely in ground water studies, mineral deposit studies and site contamination applications. The Em-34/3 can ...

Model 3919/4119/4120 D344 - Conductivity Sensor

by Aanderaa Data Instruments AS - a Xylem brand     based in Bergen, NORWAY

Conductivity Sensor 3919 Conductivity/Temperature Sensor 4119 Conductivity Sensor with analog output 4120 are compact fully integrated sensors for measuring the electrical conductivity of seawater. The 3919 model is designed to be mounted directly on the top-end plate of RCM9/11 and RDCP as well as for stand alone operation via the SR10 or RS-232 ...

Model Q45CT - Toroidal Conductivity Monitor

by Analytical Technology, Inc. (ATI)     based in Collegeville, PENNSYLVANIA (USA)

ATI’s Model Q45CT Toroidal Conductivity system is designed for online monitoring of chemically aggressive process solutions. This sensor consists of two metallic ribbon coils that are fixed in place by the sensor jacket material. The drive coil is used to induce a current in the process solution. The second sensing coil is used to measure ...

GISCO - Model CMD EM - Electromagnetic Ground Conductivity Meters

by Geophysical Instrument Supply Co. (GISCO)     based in Minneapolis, MINNESOTA (USA)

One control unit for probes of lengths 1, 2, or 4 m. Optimization for accuracy and fast response. GPS connectivity. Large data storage memory. Rechargeable Li-Ion cells for 3-4 working days or 6 AA cells. Easy control system with graphical screen. Manual or continuous measuring modes. Long term and temperature stability of calibration. Fast ...

Diver - Water Level Logger

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

Diver water level data loggers are the world’s most widely used and compact instruments for automatic measurement and registration of groundwater level, conductivity and temperature.

Need help finding the right suppliers?

Let the XPRTs do the work for you