Conductivity Monitoring Equipment available in Haiti

Available in Haiti| Near Haiti
456 Results found

We couldn't find any results in Haiti

Here is a list of results available in Haiti

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Conductivity Monitoring ×

  • Available in: Latin America ×

  • Available in: Haiti ×

Model ECO406 - Continuous Conductivity Indicator

by Adwa Hungary Kft.     based in Szeged, HUNGARY

These continuous indicators are designed for easy maintenance, simple to read, accurate readings and cost effective purpose, so to meet the general requirements of all range of users.

Model P4 - Conductivity Level Controller

by Hawker Electronics Limited     based in Birmingham, UNITED KINGDOM

Plug in (via DIN base) level controller with close switching differential suitable for the majority of applications. Fully adjustable sensitivity between 100 ohms to 18,000 ohms. Switch selectable fail to safe operation with LED indication. Two sets of volt free changeover contacts with LED for relay operation and also a power on LED. Moulded ...

Model CT2X Series - Conductivity & Temperature Sensor

by Instrumentation Northwest Inc. (INW)     based in Kirkland, WASHINGTON (USA)

The CT2X is a conductivity and temperature sensor with built-in datalogging. Incorporating a 4-pole epoxy and graphite electrode cell, it is extremely durable and resistant to data interferences—making it excellent for use in rugged field conditions. The CT2X also comes with INW’s powerful, easy-to-use

Model DJS-1 - Conductivity Electrode

by Shanghai Ruosull Technology Co Ltd     based in Shanghai, CHINA

K=1 Conductivity Electrode with glass body 2 cells platinum plates with black Pt. or bright Pt. choice Suitable for application in laboratory and in field. Cell Materia Glass/Pt, Cell Constant (cm-1) 1±0.1, Dimensions(mm) Φ12x150.

Model C3645W - Conductivity Controller

by Automated Water & Effluent Ltd (AWE)     based in Beaconside,, UNITED KINGDOM

C3645W Conductivity Controller in IP55 enclosure ranges 0-200 μS, 0-2000 μS & 0-20.00 mS, 1 set point 0 - 40 sec delay timer & 4 - 20 mA O/P mains supply 115 / 230 VAC.

Jenway - Conductivity Bench Meter Accessories

by Bibby Scientific Limited     based in Stone, UNITED KINGDOM

A number of accessories are available for use with the 4510 and 4520 conductivity meters and the 3540 combined pH and conductivity meter.

AMI INSPECTOR - Model QA - Resistivity Portable Monitoring System

by SWAN Analytische Instrumente AG     based in Hinwil, SWITZERLAND

The portable AMI INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, resistivity process monitors.

Metrohm - Model 780 and 781 - Advanced Laboratory pH and Ion Meters

by Metrohm AG     based in Herisau, SWITZERLAND

The 780 pH Meter and 781 pH/Ion Meter are the instruments of choice for those seeking an elevated level of technical comfort and freedom in their measurements of pH, ORP, Ipol, Upol, and ion concentrations. The meters, which are equipped with built-in quality assurance, guarantee reliable results at all times. Features such as the internal method ...

IC Controls - Model 210-C-TDS - Boiler Water Total Dissolved Solids (TDS) Analyzer

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The Boiler Water Total Dissolved Solids (TDS) Analyzer model 210-C TDS from IC Controls gives you maximum flexibility, reliability, and ease of use. The Total Dissolved Solid measurement are critical to your boiler and must be strictly monitored and maintained to ensure maximum operating efficiency. The 210-C TDS was ...

HORIBA LAQUA - Model DS-70 Series - Benchtop Conductivity Meter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

LAQUA DS-70 series measures Conductivity, Resistivity, Salinity, TDS and Temperature simultaneously and the Model DS-72 complies with industrial pharmacopoeias standard (JIS, USP, EP, JP and CP). The meters’ auto diagnostic function allows the user to make sure that the instruments will always give high performance and reliable measurements. ...

Solinst Levelogger Junior - Model 3001 - Water Level, Temperature and Conductivity Dataloggers

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The LTC Levelogger Junior provides the convenience of conductivity, temperature, and water level measurements in one instrument. The LTC Levelogger Junior combines a data logger, 5-year battery, pressure transducer, temperature and conductivity sensors in a small waterproof stainless steel housing, 7/8' x 7.5' (22 mm x 190 mm). Compatible with ...

Model DM-2EC - Commercial Inline Dual EC Monitor

by HM Digital, Inc.     based in Culver City, CALIFORNIA (USA)

Inline ELECTRICAL CONDUCTIVITY monitor that can be installed on industrial water filtration systems such as car washes, window washing, manufacturing, and food processing.

Jenway - Model 470 - Portable Conductivity Meter

by Bibby Scientific Limited     based in Stone, UNITED KINGDOM

The 470 hand held conductivity/TDS meter allows calibration by direct cell constant entry or through the use of standard solutions. The display simultaneously shows temperature compensated conductivity or TDS and temperature. For optimum resolution the best conductivity/TDS range is automatically selected, whilst temperature compensation is ...

Geonics - Model EM-34 - Well Respected Conductivity Instrument

by Geonics Limited     based in Mississauga, ONTARIO (CANADA)

The Geonics EM-34/3 is a well respected conductivity instrument for deeper surveying applications. Offered with 3 coil spacing’s, 10, 20, and 40m, this allows investigations depths of up to 60m. A 2 man system, the EM-34/3 is used routinely in ground water studies, mineral deposit studies and site contamination applications. The Em-34/3 can ...

Model 3919/4119/4120 D344 - Conductivity Sensor

by Aanderaa Data Instruments AS - a Xylem brand     based in Bergen, NORWAY

Conductivity Sensor 3919 Conductivity/Temperature Sensor 4119 Conductivity Sensor with analog output 4120 are compact fully integrated sensors for measuring the electrical conductivity of seawater. The 3919 model is designed to be mounted directly on the top-end plate of RCM9/11 and RDCP as well as for stand alone operation via the SR10 or RS-232 ...

Model Q45C2 - 2-Electrode Conductivity Monitor

by Analytical Technology, Inc. (ATI)     based in Collegeville, PENNSYLVANIA (USA)

Low-level conductivity measurements are essential for monitoring a variety of high purity water systems. The proper operation of deionizers, reverse osmosis membranes, ion exchange systems, and heat exchangers require constant monitoring to ensure high quality production.

Model Q45CT - Toroidal Conductivity Monitor

by Analytical Technology, Inc. (ATI)     based in Collegeville, PENNSYLVANIA (USA)

ATI’s Model Q45CT Toroidal Conductivity system is designed for online monitoring of chemically aggressive process solutions. This sensor consists of two metallic ribbon coils that are fixed in place by the sensor jacket material. The drive coil is used to induce a current in the process solution. The second sensing coil is used to measure ...

GISCO - Model CMD EM - Electromagnetic Ground Conductivity Meters

by Geophysical Instrument Supply Co. (GISCO)     based in Minneapolis, MINNESOTA (USA)

One control unit for probes of lengths 1, 2, or 4 m. Optimization for accuracy and fast response. GPS connectivity. Large data storage memory. Rechargeable Li-Ion cells for 3-4 working days or 6 AA cells. Easy control system with graphical screen. Manual or continuous measuring modes. Long term and temperature stability of calibration. Fast ...

Multilevel Groundwater Monitoring Technology

by Westbay Instruments     based in Burnaby, BRITISH COLUMBIA (CANADA)

The Westbay System is a multilevel groundwater monitoring technology that allows testing of hydraulic conductivity, monitoring of fluid pressure and collection of fluid samples from multiple zones within a single borehole. The sophisticated features of the Westbay System represent a significant advancement in groundwater monitoring capability. ...

Aardvark - Automated Constant-Head Borehole Permeameter to Measure Soil Hydraulic Conductivity

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

The Aardvark permeameter is a fully automated constant-head borehole permeameter to measure soil hydraulic conductivity (Ksat) and other related parameters like sorptivity and percolation in the field. The set can be installed easily and can be used to a depth of 15 m. The permeameter is available for use with a laptop/tablet and for use with a ...

Need help finding the right suppliers?

Let the XPRTs do the work for you