Conductivity Monitoring Equipment in Serbia

16 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Conductivity Monitoring ×

  • In: Europe ×

  • In: Serbia ×

AMI INSPECTOR - Model QA - Resistivity Portable Monitoring System

by SWAN Analytische Instrumente AG     Distributor in Novi Sad, SERBIA

The portable AMI INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, resistivity process monitors.

Aardvark - Automated Constant-Head Borehole Permeameter to Measure Soil Hydraulic Conductivity

by Eijkelkamp Soil & Water     Distributor in SERBIA

The Aardvark permeameter is a fully automated constant-head borehole permeameter to measure soil hydraulic conductivity (Ksat) and other related parameters like sorptivity and percolation in the field. The set can be installed easily and can be used to a depth of 15 m. The permeameter is available for use with a laptop/tablet and for use with a ...

Soil Salinity / Conductivity Meters: W.E.T. Sensor

by Eijkelkamp Soil & Water     Distributor in SERBIA

Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a PC.

Diver - Water Level Logger

by Eijkelkamp Soil & Water     Distributor in SERBIA

Diver water level data loggers are the world’s most widely used and compact instruments for automatic measurement and registration of groundwater level, conductivity and temperature.

Model AMI Rescon - Complete Monitoring System

by SWAN Analytische Instrumente AG     Distributor in Novi Sad, SERBIA

Complete monitoring system for the automatic, continuous measurement of the specific resistivity / specific conductivity in high purity water.

Model Hooghoudt - Hydraulic Conductivity Test Kit

by Eijkelkamp Soil & Water     Distributor in SERBIA

In case of direct measurement in the field the auger hole method according to Hooghoudt can be applied.Following this method the determination of the permeability to water of a soil takes little time (by comparison to other methods), requires a limited number of instruments.

Swansensor - Model UP-CON1000, NPT - Conductivity Sensor

by SWAN Analytical     Distributor in Novi Sad, SERBIA

Two-electrode conductivity sensor for the continuous measurement in water/steam cycle applications. Conductivity sensor with stainless steel body, titanium electrode and built-in temperature probe for automatic temperature compensation. Recommended measuring range: 0.055 to 1'000µS/cm.

Mini-Diver - Groundwater Level Data Loggers

by Eijkelkamp Soil & Water     Distributor in SERBIA

Diver water level data loggers by Schlumberger Water Services are the world’s most widely used and compact instruments for automatic measurement and registration of groundwater level, conductivity and temperature.

In Situ Hydraulic Conductivity Tests: Rainfall Simulator

by Eijkelkamp Soil & Water     Distributor in SERBIA

The extent to which the soil is sensitive to erosion is determined largely by the composition of the soil. Knowledge of the sensitivity to erosion is important for the development of a certain plot. The sensitivity to erosion is hard to measure. Absolute values can not be obtained. It is, however, possible to obtain a reasonable indication by ...

Conductivity Meters and Probes

by Novolab d.o.o.     based in Belgrade, SERBIA

Portable and waterproof handheld meters. Laboratory bench-top meters. Calibrated in conductivity or dissolved solids. Full range of probes; temperature compensated.

Swansensor - Model UP-CON1000, SL - Conductivity Sensor (Slot-Lock Adapter)

by SWAN Analytical     Distributor in Novi Sad, SERBIA

Two-electrode conductivity sensor for the continuous measurement in water/steam cycle applications. Conductivity sensor with stainless steel body, titanium electrode and built-in temperature probe for automatic temperature compensation. Recommended measuring range: 0.055 to 1'000µS/cm.

SWAN - QA-Monitor AMI Inspector Pharmacon

by SWAN Analytische Instrumente AG     Distributor in Novi Sad, SERBIA

The portable AMI INSPECTOR is a complete on-line monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, conductivity measurements in pharmaceutical applications.

Air Permeameter for Soil

by Eijkelkamp Soil & Water     Distributor in SERBIA

The air permeameter apparatus measures the permeability or conductance of an (undisturbed) soil sample. Air permeability is the property of the soil pore system allowing air to flow through. Generally the pore sizes and their connectivity determine whether a soil has high or low permeability. Air will flow easily through soil with large pores and ...

AquaPlus - Model DO and EC - Measuring Set Optical

by Eijkelkamp Soil & Water     Distributor in SERBIA

The AquaPlus probe is a combined optical dissolved oxygen, electrical conductivity and temperature sensor. Thanks to the built in conductivity sensor, the AquaPlus is able to calculate and automatically compensate DO readings for changes in water salinity.

Tension-Infiltrometer for Water Infiltration Measurements

by Eijkelkamp Soil & Water     Distributor in SERBIA

The tension infiltrometer measures the hydraulic properties of unsaturated soil. Water held under tension infiltrates into a dry soil through a highly permeable nylon membrane. The time dependent infiltration rate is used to calculate unsaturated hydraulic conductivities and related hydraulic properties. Infiltration rates are recorded manually.

SWAN - Model AMI Powercon - Acid (Cation) Conductivity

by SWAN Analytical     Distributor in Novi Sad, SERBIA

Analyzer for the automatic and continuous measurement of acid (cation) conductivity in feedwater, steam and condensate. Measurement the conductivity after a cation exchanger. Two precision conductivity sensor with slot-lock design and integrated Pt1000 temperature probe. Easy to replace cation exchanger. Automatic deaeration of the cation ...

Need help finding the right suppliers?

Let the XPRTs do the work for you