Conductivity Monitoring Equipment For Monitoring And Testing In South Africa
-
ShowcaseManufactured by Eureka Water Probesbased in USA
The MantaPlus 25 comes standard with temperature, pH, conductivity, and a wipered turbidity sensor, and optional ORP and depth sensors. The M+25 features our refillable pH reference, which requires no expensive consumables. Connect the MantaPlus 25 to any of our field display options for sampling in the field, or add a battery pack for autonomous deployments. Connect to a telemetry station for ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Acid Gas Scrubber neutralizes inorganic acids that often exist in a process exhaust stream or are created during the oxidation of air pollutants. The module can effectively scrub a variety of acids including Hydrogen Chloride (HCl), Hydrogen Bromide (HBr), Hydrogen Fluoride (HF) and Sulfur Dioxide ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Multiple rod level switch with PP insulation. Application area: With 2 to 3 rods, a corresponding number of switching points between 12 cm and 4 m can be realized. The VEGAKON 66 is a conductive limit switch for conductive liquids. The instrument is suitable as full or empty detector in pipelines. ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Compact level switch with partial PTFE insulation. Application area: For front-flush installation. The instrument is ideally suited as full or empty detector in pipelines. The VEGAKON 61 is a condcutive limit switch for conductive liquids. The instrument is best suited as full and empty detector in pipelines. ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Rod probe, partly PTFE insulated. Application area: For measurement of bulk solids and non-conductive liquids such as oil. A full/empty adjustment is necessary for setup. The VEGACAL 62 is a level sensor for continuous level measurement in all industries. The partly insulated probe is designed for measurement of bulk solids and can be also used in non-conductive liquids such as e.g. oil. The ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Rod probe, fully PE or PTFE insulated. Application area: For measurement in conductive and non-conductive liquids. A full/empty adjustment is necessary for setup. The VEGACAL 63 level sensor can be used universally for the measurement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven mechanical construction offers high functional ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 930 Compact IC Flex SeS is the intelligent Compact IC instrument with sequential suppression. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 940 Professional IC Vario ONE/SeS/PP is the intelligent IC instrument with sequential suppression and a peristaltic pump for suppressor regeneration. The instrument can be used with any separation and detection ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline preconcentration technique, Inline Matrix Elimination, sequential suppression, and conductivity detection enables ultratrace analysis down to the lowest ppt range (ng/L) of anions or cations in complex ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 895 Professional PVC Thermomat is an analysis system for the automatic determination of the thermostability of polyvinyl chloride (PVC) and related copolymers. With eight measuring positions in two heating blocks. The built-in display shows the status of the instrument and each individual measuring position. Start buttons for every measuring position enable the measurement start on the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
TitrIC flex II – for complete analysis of anions and cations. Fully automated system for direct measurement of temperature, conductivity, and pH value, as well as for titrimetric determination of p value and m value. The cations (including calcium and magnesium) and anions are determined simultaneously with ion chromatography following Inline Ultrafiltration. Automatic calculation of the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 930 Compact IC Flex Oven/ChS/Deg is the intelligent Compact IC instrument with column oven, chemical suppression and built-in degasser. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Module for pH/ion measurement as supplement to a Titrando or "stand-alone" in combination with a 900 Touch Control. In addition to measurements of pH, temperature, mV, Ipol, Upol and concentration, the pH Module can perform standard additions (manual, dos, autodos) and Liquid Handling (add, prep, empty). It enables the use of both conventional and intelligent sensors for measuring. Also ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm Inline Ultrafiltration and conductivity detection enables fully automatic determination of cations or anions ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The ProcessLab ADI 2045PL is a robust routine system for at-line ion analysis on the production floor and in control labs. It is typically used for multiple sampling points and parameters that do not require fast analysis and response times. Samples are taken manually at each sampling point, fed into the ProcessLab (manually or by means of an autosampler), and automatically ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The electrodes are used for conductive detection of limit levels. The areas of use cover all sectors where liquid and conductive media are to be detected or controlled. Limit value measurements (overflow, dry run, max. alarm) as well as min./max. control and pump control (hysteresis) can be implemented. For conductive level detection: Electrodes for conductive detection of limit levels and for ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Portable two-channel pH/conductivity measuring instrument for parallel measurement of pH/mV/conductivity/TDS/salinity and temperature. You will be optimally equipped for measurements outdoors with this battery-operated measuring ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Portable two-channel measuring instrument for measuring pH/mV and dissolved oxygen. This package includes everything needed to get started at once: measuring instrument, sensors, calibration solutions – and all packaged in a robust transport ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 930 Compact IC Flex Oven/SeS/PP is the intelligent Compact IC instrument with column oven, sequential suppression and peristaltic pump for suppressor regeneration. The instrument can be used with any separation and detection ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you