Conductivity Monitoring Equipment For Monitoring And Testing Near Nunavut
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring tape (accuracy: ± 1 ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide range of other feilds relating to equipment management ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 50 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Van Dorn water sampler (horizontal water bottle) has been specially designed for the sampling of open water. As a result of the material choice, it is also suitable for sampling coastal waters and for the analysis for heavy metals. The horizontal water flow through is not hindered by constrictions so that no appreciable contamination can occur in shallow water. As a result, the sampler is ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Accurate measurement of UPW resistivity. Well-examined temperature compensation function for UPW. Arbitrary setting of the compensation target temperature. ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HE-960HI is a wide-range type sanitary electric conductivity meter that can measure over a wide range from manufacturing water up to 500 mS/cm, and enables advanced concentration management through abundant outputs. Cleaning-in-Place (CIP) terminal management and a reduction in cleaning solutions is also achieved through accurate surface detection. And we have developed a lineup of electric ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The air permeameter apparatus measures the permeability or conductance of an (undisturbed) soil sample. Air permeability is the property of the soil pore system allowing air to flow through. Generally the pore sizes and their connectivity determine whether a soil has high or low permeability. Air will flow easily through soil with large pores and good connectivity between them. Small pores with ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HE-960CW is ideal for the conductivity control of the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals. And we have developed a lineup of electric conductivity sensors that can be used in conjunction, from the conventional insertion type to the flow-through type with improved cleaning and sanitary ...
-
Manufactured by In-Situ Environmentalbased in USA
The FloPro XCi device integrates water quality and quantity monitoring sensors with vital mining, municipal and industrial equipment and assets. Whether you need to measure flow as well as conductivity, pH and rainfall, or utilize a downward looking ultrasonic depth sensor to measure pond levels, the FloPro is fully expandable for your needs. FloPro is easily interfaced to SCADA/telemetry systems ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The Conductivity Plμs Level and Temperature Meter enables accurate measurements of conductivity, water level and temperature in wells, boreholes, stand pipes and open bodies of water. The Conductivity Plμs can be used to profile conductivity and temperature to depths of 1000ft ...
-
Manufactured by In-Situ Environmentalbased in USA
Whether you are spot checking a tank or conducting long-term monitoring at remote sites, the Aqua TROLL 500 has you covered. This cost-effective multiprobe enables wireless data collection when used as a handheld, plus easy integration with control systems and telemetry for long-term installation. With interchangeable sensors, the Aqua TROLL 500 replaces multiple instruments and saves time in the ...
-
Manufactured by In-Situ Environmentalbased in USA
The Aqua TROLL 400 is an all-in-one multiparameter process probe that measures 12 water parameters. The probe contains six water quality sensors housed in a sub-2 inch unit, measuring actual and specific conductivity, salinity, total dissolved solids, resistivity, density, dissolved oxygen, ORP, pH, temperature, water level and water ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Despite its small size, the Compact Crawler CPT130 is a highly effective CPT rig that allows you to conduct CPT at even the hardest to reach locations. The purpose built narrow frame allows access through tight spaces, such as doors and between buildings. The reduced stroke CPT pusher even allows you to conduct CPT in low headroom environments. Thanks to its compact size, the crawler can be ...
-
Manufactured by In-Situ Environmentalbased in USA
Drift-resistant sensors and versatile instrumentation make deployed harmful algal bloom monitoring effective and affordable. Get the whole picture Catch events spot sampling would miss; speed response time; track and analyze trends over time. Reduce site visits Easy to install telemetry delivers near real-time data, and antifouling technology and drift-resistant sensors mean fewer trips to clean ...
-
Manufactured by In-Situ Environmentalbased in USA
The Conductivity Calibration Kit is Ideal for multi-point calibrations, this kit contains NIST-traceable conductivity calibration solutions in three ...
-
Manufactured by In-Situ Environmentalbased in USA
Use this Quick Cal Solution to calibrate dissolved oxygen, conductivity, pH, and ORP with a single solution. Available in 250 mL bottle 4 ...
-
Manufactured by In-Situ Environmentalbased in USA
The copper conductivity TROLL Shield Antifouling Conductivity Sensor Guard combats biofouling and extends Aqua TROLL 100/200 deployments by up to six weeks, ideal for coastal environments and high-fouling sites. For best performance, replace the guard every 6 months or as ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HORIBA LAQUA F-70 series marries advanced technology with stylish design and an easy-to-use touch screen interface. The LAQUA series was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. LAQUA series ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 100 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance. The FES-310L Series sanitary conductivity sensors, which are used in conjunction with the HE-960HS ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you