Cone Penetrometers Equipment For Monitoring And Testing Available In Saskatchewan
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field. The Earth’s magnetic field (the so magnetosphere) varies from place to place, for various reasons such as inhomogeneity of rocks and the interaction between charged particles from the Sun and the magnetosphere. A mass of ferromagnetic material creates a detectable disturbance in ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A 200 kN trailer-based CPT penetrometer rig is a lightweight and economical rig with full CPT testing capabilities. It is suitable for both electrical and mechanical CPT testing. It can be towed easily by a 4-wheeldrive car. It comprises a sturdy 2-axle trailer base, a 2-cylinder CPT penetrometer pusher, a diesel-hydraulic power-pack with load-sensing pump, manually operated valves, a work ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT crawler-truck, either an electrical or mechanical ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Purpose designed hydraulic wrench for driving ground anchors of the 100 kN and 200 kN stand-alone and trailer-based CPT penetrometer rigs into and out of the ground. To be operated by 2 persons. The hydraulic power for the wrench is supplied by the power-pack of the CPT penetrometer ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT container is a stand-alone unit that can be used in a variety of conditions, both onshore and offshore. It can either be mounted on a truck, a railway lorry or jack-up barge. It contains a hydraulic 200 kN short-stroke CPT pusher and is to be connected to an external ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
When you take a stand-alone CPT penetrometer pusher or a LMSR dynamic penetrometer into the field, a load of sounding tubes, tools, instruments and accessories is needed as well. For this reason Gouda-Geo proposes a handy trolley for the transport of all these materials in the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by AMS, Inc.based in USA
The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The blows required to drive the embedded cone a depth ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The hand-pushed CPT penetrometers by Gouda Geo-Equipment are portable and handy tools for simple, quick and accurate assessment of soil conditions for various purposes. We deliver our penetrometer to many international companies for their soil investigation projects. Our penetrometers are easy and straightforward to operate; you can push them into the ground using the weight of your own ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Purposely designed rig for working inside buildings. The short-stroke 200 kN pusher is provided with a built-in push-and-pull clamp and powered by a 400 Vac electric-hydraulic power-pack. Standard 1000 mm long CPT tubes are ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flightcase for hand penetrometer (0601SB), dimensions 60x40x18cm ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil research is a very important aspect in the planning and execution of agricultural- as well as civil engineering projects and operations. In order to make the soil research as comprehensive as possible the following studies must be made with regards to: The build up of a soil; i.e. determining the composition, the thickness and the position of the various strata. The soil properties; ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
When doing mechanical CPT tests, the CPT sounding tubes are pushed into the soil by means of a mechanical or electrical measuring head. At the end of each test traditionally the tubes are pulled up by means of either a pulling kit (pulling bowl with pulling piece) or a ball ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Some CPT penetrometer rigs, such as the stand-alone versions, the trailer-based versions and the light-weight CPT crawlers require anchoring to achieve a suitable reaction force to balance the pushing capacity of the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
CPT sounding tubes are used to push the electrical or mechanical cone into the ground by means of a CPT penetrometer pusher. Gouda-Geo CPT sounding tubes meet the highest quality standards. The tube material is manufactured by one of Europe’s leading steel manufacturers according to our own standards. No distinction whatsoever is made between tubes for 100 kN and 200 kN testing. All tubes ...
-
PremiumManufactured by AMS, Inc.based in USA
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, subbase and subgrades. They can readily be used for depths up to 30" and up to 6' with optional drive rods and extensions. This model complies with ASTM D6951 specifications and comes with a chart to compute CBR values, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Eijkelkamp penetrologger CBR measures by a static penetration test directly CBR values using the standard CBR cone. The standard California bearing ratio (CBR) is a penetration test for evaluation of the mechanical strength of road subgrades and basecourses. The CBR is the basis for determining the thickness of soil and aggregate layers used in the design of roads and airfields. A ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you