Cone Penetrometers Equipment For Monitoring And Testing In Texas
-
PremiumManufactured by AMS, Inc.based in USA
The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the piston barrel. A friction ring indicates maximum ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
While contractors and engineers have traditionally had few viable alternatives to increasingly-expensive metal for their water distribution systems, IPEX Inc. now offers a solution that ensures time and costsavings without sacrificing the strength or performance. With AquaRise, IPEX introduces a CPVC hot and cold water distribution system that comes with reduced material costs, offers superior ...
-
Manufactured by Thomas Broadbent & Sons Ltdbased in UNITED KINGDOM
Broadbent G-Max offers a variety of ancillary equipment to support your centrifuges, including model preparation equipment, payload containers, test actuators and sensing ...
-
Manufactured by CCI Piping Systemsbased in USA
Wrap-It Link is a versatile sealing link system can be utilized to seal the annular space of carrier pipe and casing pipe applications as well as wall penetrations of piping system. Wrap-It Link have excellent electrical insulation properties and may be used for pressure application up to 20 ...
-
based in USA
Gregg Drilling & Testing, Inc. (Gregg) offers a wide range of geotechnical and environmental cone penetration testing (CPT) and geophysical testing equipment. Cone penetration testing is a process whereby soil characteristics are determined when a cone penetrometer is driven into the subsurface. The CPT provides a rapid, reliable and economical means of determining soil stratigraphy, relative ...
-
based in USA
Gregg’s specially designed miniature cone penetrometer system provides the same valuable stratigraphic detail and soil strength information as our large diameter cone penetrometers. It can be deployed from a variety of barges and work boats and is a cost effective tool for determining near surface soil strength information. Penetration reaction is provided by the weight of the self righting ...
-
by Weatherfordbased in CANADA
The Revolution Core RSS provides precision drilling in extended- reach wells through use of point-the-bit technology, which improves borehole quality, rates of penetration, and bit life. The short. compact design reduces the complexity of rotary-steerable drilling technology and places critical LWD measurements close to the ...
-
Manufactured by Latchways PLCbased in UNITED KINGDOM
Telecommunications antenna can be located on almost any part of the roof of a building. Latchways provide fall protection systems that can provide safe access to any ...
-
Manufactured by Numabased in USA
Valveless down hole hammer design. Ability to drill efficiently against high heads of water. Designed to operate at pressures up to 250 PSI (17.0 BAR). Reversible non-ported piston case for extended life. Superior directional stability in horizontal applications. Ejecting cuttings through the collection tube eliminates traditional hole cleaning problems. Environmentally sensitive- no foam ...
-
PremiumManufactured by AMS, Inc.based in USA
The penetrologger has been especially developed to measure the resistance to penetration of the soil and to save the measuring results to digitally process them on a computer. The penetrologger is ergonomically designed, and lightweight. It can be used to measure to a depth of 80 cm. The penetrologger can provide the Unified Soil Classification System (USCS), the Vehicle Cone Index (VCI), and ...
-
PremiumManufactured by AMS, Inc.based in USA
Evaluate the consistency, compaction and bearing of fine grained, soft soils. The static cone penetrometer is used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement subgrades. Specifically developed for use in fine grained soils, particularly soft soils, to depths of 30'. They use a 60 degree vertex angled cone with an ...
-
PremiumManufactured by AMS, Inc.based in USA
The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The blows required to drive the embedded cone a depth ...
-
PremiumManufactured by AMS, Inc.based in USA
Geotester dial penetrometer set is used for on-site measurement of soil compaction by testing the foundation plane or boring samples. It gives readings of estimated unconfined compressive strength in TSF or kg/cm2 when used with the standard 1/4' dia plunger. The geotester is furnished with stainless steel plungers, carrying case, data tables, register plates and ...
-
PremiumManufactured by AMS, Inc.based in USA
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, subbase and subgrades. They can readily be used for depths up to 30" and up to 6' with optional drive rods and extensions. This model complies with ASTM D6951 specifications and comes with a chart to compute CBR values, ...
-
Manufactured by Geophysical Survey Systems, Inc., (GSSI)based in USA
UtilityScan LT is a lower cost ground penetrating radar solution based on the industry standard UtilityScan. The UtilityScan LT is purpose-built and easy to use, and allows users to quickly identify the location and depth of underground utilities in real- time. The UtilityScan LT retains the exceptional data quality and rugged construction of the UtilityScan family, and is the perfect entry-level ...
-
Manufactured by Geophysical Survey Systems, Inc., (GSSI)based in USA
The Profiler EMP-400 is GSSI’s powerful electromagnetic induction tool. This EM product was built from the ground up using a proprietary source cancellation and calibration system to create the greatest signal stability on the market and at an affordable price. Profiler’s system structure, electronics and coils are designed for maximum structural and thermal stability. These key ...
-
Manufactured by Geophysical Survey Systems, Inc., (GSSI)based in USA
StructureScan Optical is the only concrete inspection tool on the market with an optical barcode reader and patented Smart Pad technology for easy wall and floor scanning. StructureScan Optical has revolutionized 3D data collection by simplifying an often complicated survey process while providing the most accurate results in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you